Elena A. Lomonova

According to our database1, Elena A. Lomonova authored at least 22 papers between 2007 and 2019.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of five.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Other 

Links

Homepage:

On csauthors.net:

Bibliography

2019
Geometric optimization Of Variable Flux Reluctance Machines For Full Electric Vehicles.
Proceedings of the Fourteenth International Conference on Ecological Vehicles and Renewable Energies, 2019

Fault-Tolerant Controller and Failure Analysis of Automotive Electromagnetic Suspension Systems.
Proceedings of the Fourteenth International Conference on Ecological Vehicles and Renewable Energies, 2019

Feasibility Study of Multi-Phase Machine Winding Reconfiguration for Fully Electric Vehicles.
Proceedings of the Fourteenth International Conference on Ecological Vehicles and Renewable Energies, 2019

Torque optimization of Synchronous Reluctance Motor for Electric Powertrain Application.
Proceedings of the Fourteenth International Conference on Ecological Vehicles and Renewable Energies, 2019

2018
An Analysis of the Highly Linear Transfer Characteristics of Dual-Buck Converters.
IEEE Trans. Ind. Electron., 2018

Design of an axial-flux permanent magnet machine for a solar-powered electric vehicle.
Proceedings of the Thirteenth International Conference on Ecological Vehicles and Renewable Energies, 2018

Soft-landing control of low-energy solenoid valve actuators.
Proceedings of the Thirteenth International Conference on Ecological Vehicles and Renewable Energies, 2018

Analysis of variable flux reluctance machines using hybrid analytical modelling.
Proceedings of the Thirteenth International Conference on Ecological Vehicles and Renewable Energies, 2018

2017
A fast semi-analytical model for the slotted structure of induction motors.
Math. Comput. Simul., 2017

2014
Inductance Calculation of Tooth-Coil Permanent-Magnet Synchronous Machines.
IEEE Trans. Ind. Electron., 2014

Modeling and Measurements on a Finite Rectangular Conducting Plate in an Eddy Current Damper.
IEEE Trans. Ind. Electron., 2014

Single-stage three-phase AC to DC conversion with isolation and Bi-directional power flow.
Proceedings of the IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society, Dallas, TX, USA, October 29, 2014

2013
Modeling Framework for Contactless Energy Transfer Systems for Linear Actuators.
IEEE Trans. Ind. Electron., 2013

Acoustic Energy Transfer: A Review.
IEEE Trans. Ind. Electron., 2013

Introduction to the Special Section on Contactless Energy Transfer Systems.
IEEE Trans. Ind. Electron., 2013

2012
Analysis Method of the Dynamic Force and Torque Distribution in the Magnet Array of a Commutated Magnetically Levitated Planar Actuator.
IEEE Trans. Ind. Electron., 2012

Modeling of permanent magnet synchronous machine with fractional slot windings.
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012

2011
Efficiency of a Regenerative Direct-Drive Electromagnetic Active Suspension.
IEEE Trans. Veh. Technol., 2011

2010
Active Electromagnetic Suspension System for Improved Vehicle Dynamics.
IEEE Trans. Veh. Technol., 2010

2008
Design Aspects of an Active Electromagnetic Suspension System for Automotive Applications.
Proceedings of the Industry Applications Society Annual Meeting, 2008

Contactless Planar Actuator with Manipulator: a Motion System without Cables and Physical Contact between the Mover and the Fixed World.
Proceedings of the Industry Applications Society Annual Meeting, 2008

2007
Look-Up Table Based Real-Time Commutation of 6-DOF Planar Actuators.
Proceedings of the IEEE International Conference on Control Applications, 2007


  Loading...