Federico Barrero

According to our database1, Federico Barrero authored at least 115 papers between 2002 and 2020.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Other 

Links

Homepages:

On csauthors.net:

Bibliography

2020
Assessing Variable Sampling Time Controllers for Five-Phase Induction Motor Drives.
IEEE Trans. Ind. Electron., 2020

2019
Model-Based Control for Power Converters With Variable Sampling Time: A Case Example Using Five-Phase Induction Motor Drives.
IEEE Trans. Ind. Electron., 2019

Model predictive optimal control considering current and voltage limitations: Real-time validation using OPAL-RT technologies and five-phase permanent magnet synchronous machines.
Math. Comput. Simul., 2019

2018
Open-Switch Fault Detection in Five-Phase Induction Motor Drives Using Model Predictive Control.
IEEE Trans. Ind. Electron., 2018

Model Predictive Control of Six-Phase Induction Motor Drives Using Virtual Voltage Vectors.
IEEE Trans. Ind. Electron., 2018

Variable sampling time model predictive control of multiphase induction machines.
Proceedings of the IEEE 15th International Workshop on Advanced Motion Control, 2018

2017
Influence of Covariance-Based ALS Methods in the Performance of Predictive Controllers With Rotor Current Estimation.
IEEE Trans. Ind. Electron., 2017

A Simple Braking Method for Six-Phase Induction Motor Drives With Unidirectional Power Flow in the Base-Speed Region.
IEEE Trans. Ind. Electron., 2017

Open-Phase Fault-Tolerant Direct Torque Control Technique for Five-Phase Induction Motor Drives.
IEEE Trans. Ind. Electron., 2017

2016
Online Estimation of Rotor Variables in Predictive Current Controllers: A Case Study Using Five-Phase Induction Machines.
IEEE Trans. Ind. Electron., 2016

Five-Phase Induction Motor Rotor Current Observer for Finite Control Set Model Predictive Control of Stator Current.
IEEE Trans. Ind. Electron., 2016

Multiphase machines and drives - Revisited.
IEEE Trans. Ind. Electron., 2016

Comparative Study of Predictive and Resonant Controllers in Fault-Tolerant Five-Phase Induction Motor Drives.
IEEE Trans. Ind. Electron., 2016

Optimal Fault-Tolerant Control of Six-Phase Induction Motor Drives With Parallel Converters.
IEEE Trans. Ind. Electron., 2016

Recent Advances in the Design, Modeling, and Control of Multiphase Machines - Part II.
IEEE Trans. Ind. Electron., 2016

Recent Advances in the Design, Modeling, and Control of Multiphase Machines - Part I.
IEEE Trans. Ind. Electron., 2016

An evaluation methodology for reliable simulation based studies of routing protocols in VANETs.
Simul. Model. Pract. Theory, 2016

Harmonic analysis of direct digital control of voltage inverters.
Math. Comput. Simul., 2016

An Intelligent Strategy for Tactical Movements of UAVs in Disaster Scenarios.
Int. J. Distributed Sens. Networks, 2016

On-siteDriverID: A secure authentication scheme based on Spanish eID cards for vehicular ad hoc networks.
Future Gener. Comput. Syst., 2016

A methodology for structured ontology construction applied to intelligent transportation systems.
Comput. Stand. Interfaces, 2016

2015
IGBT-Gating Failure Effect on a Fault-Tolerant Predictive Current-Controlled Five-Phase Induction Motor Drive.
IEEE Trans. Ind. Electron., 2015

The role of congestion in probabilistic broadcasting for ubiquitous wireless multi-hop networks through mediation analysis.
Pervasive Mob. Comput., 2015

A Survey on Multihop Ad Hoc Networks for Disaster Response Scenarios.
Int. J. Distributed Sens. Networks, 2015

Ad Hoc Networks for Disaster Scenarios and/or Threat Detection.
Int. J. Distributed Sens. Networks, 2015

Learning Achievements Using a PBL-Based Methodology in an Introductory Electronics Course.
Rev. Iberoam. de Tecnol. del Aprendiz., 2015

A survey on probabilistic broadcast schemes for wireless ad hoc networks.
Ad Hoc Networks, 2015

Performance Evaluation of Reactive Routing Protocols for VANETs in Urban Scenarios Following Good Simulation Practices.
Proceedings of the 9th International Conference on Innovative Mobile and Internet Services in Ubiquitous Computing, 2015

Five-phase induction machine parameter identification using PSO and standstill techniques.
Proceedings of the IECON 2015, 2015

Dissimilarity metrics for probabilistic broadcasting in wireless multi-hop networks.
Proceedings of the IECON 2015, 2015

Rotor current observer in finite-state model predictive control of five-phase IM.
Proceedings of the IECON 2015, 2015

Unbalanced operation of multiphase wind energy conversion systems connected to microgrids.
Proceedings of the IECON 2015, 2015

A simple braking method for six-phase induction motor drives with diode front-end rectifier.
Proceedings of the IECON 2015, 2015

Open-phase fault operation of 5-phase induction motor drives using DTC techniques.
Proceedings of the IECON 2015, 2015

Comparative study of DTC and RFOC methods for the open-phase fault operation of a 5-phase induction motor drive.
Proceedings of the IECON 2015, 2015

2014
Intelligent Transportation Systems and Wireless Access in Vehicular Environment Technology for Developing Smart Cities.
Proceedings of the Big Data and Internet of Things: A Roadmap for Smart Environments, 2014

Improving discovery phase of reactive ad hoc routing protocols using Jaccard distance.
J. Supercomput., 2014

SVM Procedure for $n$-Phase VSI With Low Harmonic Distortion in the Overmodulation Region.
IEEE Trans. Ind. Electron., 2014

Speed Control of Five-Phase Induction Motors With Integrated Open-Phase Fault Operation Using Model-Based Predictive Current Control Techniques.
IEEE Trans. Ind. Electron., 2014

Multi-objective performance optimization of a probabilistic similarity/dissimilarity-based broadcasting scheme for mobile ad hoc networks in disaster response scenarios.
Soft Comput., 2014

Networked transducers in intelligent transportation systems based on the IEEE 1451 standard.
Comput. Stand. Interfaces, 2014

A Survey on Ad Hoc Networks for Disaster Scenarios.
Proceedings of the 2014 International Conference on Intelligent Networking and Collaborative Systems, 2014

A Dissemination Analysis in Mobile Wireless Ad Hoc Networks Using Probabilistic Broadcast.
Proceedings of the Eighth International Conference on Innovative Mobile and Internet Services in Ubiquitous Computing, 2014

A reconfigurable WSN node based on ISO/IEC/IEEE 21451 standard.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2014

2013
The Role of Ad Hoc Networks in the Internet of Things: A Case Scenario for Smart Environments.
Proceedings of the Internet of Things and Inter-cooperative Computational Technologies for Collective Intelligence, 2013

Variable-Speed Five-Phase Induction Motor Drive Based on Predictive Torque Control.
IEEE Trans. Ind. Electron., 2013

Space-Vector PWM With Reduced Common-Mode Voltage for Five-Phase Induction Motor Drives.
IEEE Trans. Ind. Electron., 2013

Understanding Power Electronics and Electrical Machines in Multidisciplinary Wind Energy Conversion System Courses.
IEEE Trans. Educ., 2013

Modelling and assessing ad hoc networks in disaster scenarios.
J. Ambient Intell. Humaniz. Comput., 2013

Hybrid Flooding Scheme for Mobile Ad Hoc Networks.
IEEE Communications Letters, 2013

Analysis of embedded CORBA middleware performance on urban distributed transportation equipments.
Comput. Stand. Interfaces, 2013

A text categorisation tool for open source communities based on semantic analysis.
Behav. Inf. Technol., 2013

Identification of new added value services on intelligent transportation systems.
Behav. Inf. Technol., 2013

An evolutionary computation approach for optimizing connectivity in disaster response scenarios.
Appl. Soft Comput., 2013

An Evolutionary Computational Approach for Optimizing Broadcasting in Disaster Response Scenarios.
Proceedings of the Seventh International Conference on Innovative Mobile and Internet Services in Ubiquitous Computing, 2013

Fault-tolerant control of six-phase induction generators in wind energy conversion systems with series-parallel machine-side converters.
Proceedings of the IECON 2013, 2013

Experimental magnetizing inductance identification in five-phase induction machines.
Proceedings of the IECON 2013, 2013

Sensitivity to electrical parameter variations of Predictive Current Control in multiphase drives.
Proceedings of the IECON 2013, 2013

Harmonic content in VSI operated with homogeneous pulse width.
Proceedings of the IECON 2013, 2013

Authentication Systems Using ID Cards over NFC Links: The Spanish Experience Using DNIe.
Proceedings of the 4th International Conference on Emerging Ubiquitous Systems and Pervasive Networks (EUSPN-2013) and the 3rd International Conference on Current and Future Trends of Information and Communication Technologies in Healthcare (ICTH), 2013

Analysis of Probabilistic Forwarding in Opportunistic Networks Using the Percolation Theory.
Proceedings of the Sixth International Conference on Developments in eSystems Engineering, 2013

2012
An ontology-based semantic service for cooperative urban equipments.
J. Netw. Comput. Appl., 2012

Networked Electronic Equipments Using the IEEE 1451 Standard - VisioWay: A Case Study in the ITS Area.
Int. J. Distributed Sens. Networks, 2012

Experiencia PBL en una Asignatura Básica de Electrónica.
Rev. Iberoam. de Tecnol. del Aprendiz., 2012

An evolutionary factor analysis computation for mining website structures.
Expert Syst. Appl., 2012

An evolutionary computation approach for designing mobile ad hoc networks.
Expert Syst. Appl., 2012

Route duration improvement in wireless sensor and actuator networks based on mobility parameters and flooding control.
EURASIP J. Wireless Comm. and Networking, 2012

Direct torque control for five-phase induction motor drives with reduced common-mode voltage.
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012

Synchronous modulation of cascaded inverters of asymmetrical open-end winding motor drive.
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012

Speed control of five-phase induction motor drives with an open phase fault condition and predictive current control methods.
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012

2011
Comparative Analysis of Discontinuous and Continuous PWM Techniques in VSI-Fed Five-Phase Induction Motor.
IEEE Trans. Ind. Electron., 2011

Switching Ripple Characteristics of Space Vector PWM Schemes for Five-Phase Two-Level Voltage Source Inverters - Part 2: Current Ripple.
IEEE Trans. Ind. Electron., 2011

Predictive Current Control of Dual Three-Phase Drives Using Restrained Search Techniques.
IEEE Trans. Ind. Electron., 2011

Switching Ripple Characteristics of Space Vector PWM Schemes for Five-Phase Two-Level Voltage Source Inverters - Part 1: Flux Harmonic Distortion Factors.
IEEE Trans. Ind. Electron., 2011

An Enhanced Predictive Current Control Method for Asymmetrical Six-Phase Motor Drives.
IEEE Trans. Ind. Electron., 2011

Identification of the design variables of eLearning tools.
Interact. Comput., 2011

Website Structure Mining using Social Network Analysis.
Internet Res., 2011

Distributed urban traffic applications based on CORBA event services.
IJSSC, 2011

Plataforma para el Aprendizaje de Tecnologías Inalámbricas y Redes de Sensores Basada en el Sistema Open Hardware Denominado Openmoko.
Rev. Iberoam. de Tecnol. del Aprendiz., 2011

A Reliable Route Selection Scheme Based on Caution Zone and Nodes' Arrival Angle.
IEEE Communications Letters, 2011

Evaluation of Ad Hoc Networks in Disaster Scenarios.
Proceedings of the 2011 Third International Conference on Intelligent Networking and Collaborative Systems (INCoS), Fukuoka, Japan, November 30, 2011

An Exploratory Social Network Analysis of Academic Research Networks.
Proceedings of the 2011 Third International Conference on Intelligent Networking and Collaborative Systems (INCoS), Fukuoka, Japan, November 30, 2011

Analysis of the Core Team Role in Open Source Communities.
Proceedings of the International Conference on Complex, 2011

Development of a Bluetooth Intelligent Multi-user Environment Based on Wireless CORBA.
Proceedings of the International Conference on Complex, 2011

2010
An Enhanced Background Estimation Algorithm for Vehicle Detection in Urban Traffic Scenes.
IEEE Trans. Veh. Technol., 2010

The role of Internet in the development of future software projects.
Internet Res., 2010

Internet in the development of future road-traffic control systems.
Internet Res., 2010

Analysis of virtual communities supporting OSS projects using social network analysis.
Inf. Softw. Technol., 2010

Reforming ICT Graduate Programs to Meet Professional Needs.
IEEE Computer, 2010

A shadow removal algorithm for vehicle detection based on reflectance ratio and edge density.
Proceedings of the 13th International IEEE Conference on Intelligent Transportation Systems, 2010

Electric propulsion technology based in predictive direct torque control and asymmetrical dual three-phase drives.
Proceedings of the 13th International IEEE Conference on Intelligent Transportation Systems, 2010

Ubiquitous architecture for environmental sensor networks in road traffic applications.
Proceedings of the 13th International IEEE Conference on Intelligent Transportation Systems, 2010

Development of a Bluetooth CORBA Based Intelligent Infrastructure for Multi-user Urban Environments.
Proceedings of the 2nd International Conference on Intelligent Networking and Collaborative Systems, 2010

A Wireless In-door System for Assisting Victims and Rescue Equipments in a Disaster Management.
Proceedings of the 2nd International Conference on Intelligent Networking and Collaborative Systems, 2010

Application of Genetic Algorithms to the Identification of Website Link Structure.
Proceedings of the International Conference on Advances in Social Networks Analysis and Mining, 2010

2009
One-Step Modulation Predictive Current Control Method for the Asymmetrical Dual Three-Phase Induction Machine.
IEEE Trans. Ind. Electron., 2009

A Proof of Concept Study of Predictive Current Control for VSI-Driven Asymmetrical Dual Three-Phase AC Machines.
IEEE Trans. Ind. Electron., 2009

Modeling Learner Satisfaction in an Electronic Instrumentation and Measurement Course Using Structural Equation Models.
IEEE Trans. Educ., 2009

Modelling Mailing List Behaviour in Open Source Projects: the Case of ARM Embedded Linux.
J. UCS, 2009

An empirical study of the driving forces behind online communities.
Internet Res., 2009

Embedded Multimedia Processors for Road-Traffic Parameter Estimation.
IEEE Computer, 2009

Virtual communities as a resource for the development of OSS projects: the case of Linux ports to embedded processors.
Behav. Inf. Technol., 2009

A License Plate Extraction Algorithm Based on Edge Statistics and Region Growing.
Proceedings of the Image Analysis and Processing, 2009

Analysis of variable third harmonic injection for five-phase IM.
Proceedings of the European Control Conference, 2009

2008
eDSPLab: remote laboratory for experiments on DSP applications.
Internet Res., 2008

A technological acceptance of e-learning tools used in practical and laboratory teaching, according to the European higher education area.
Behav. Inf. Technol., 2008

An Enhanced Background Estimation Algorithm for Vehicle Detection in Urban Traffic Video.
Proceedings of the 11th International IEEE Conference on Intelligent Transportation Systems, 2008

Development of an Embedded Vision based Vehicle Detection System using an ARM Video Processor.
Proceedings of the 11th International IEEE Conference on Intelligent Transportation Systems, 2008

2007
Addressing Learner Satisfaction Outcomes in Electronic Instrumentation and Measurement Laboratory Course Organization.
IEEE Trans. Educ., 2007

Analysis of utility and use of a web-based tool for digital signal processing teaching by means of a technological acceptance model.
Comput. Educ., 2007

Interactive multimedia teaching of digital signal processors.
Comp. Applic. in Engineering Education, 2007

2006
Authors' Reply.
IEEE Trans. Educ., 2006

2005
A Digital Signal Processing Teaching Methodology Using Concept-Mapping Techniques.
IEEE Trans. Educ., 2005

Implementation of a web-based educational tool for digital signal processing teaching using the technological acceptance model.
IEEE Trans. Educ., 2005

2002
Speed control of induction motors using a novel fuzzy sliding-mode structure.
IEEE Trans. Fuzzy Syst., 2002


  Loading...