Eric Semail

According to our database1, Eric Semail authored at least 19 papers between 2003 and 2019.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Other 

Links

Homepages:

On csauthors.net:

Bibliography

2019
Model predictive optimal control considering current and voltage limitations: Real-time validation using OPAL-RT technologies and five-phase permanent magnet synchronous machines.
Mathematics and Computers in Simulation, 2019

Demagnetization analysis of an open-end windings 5-phase PMSM under transistor short-circuit fault.
Proceedings of the IECON 2019, 2019

Impact of Winding Parameters on Torque Level under Harmonic Injection in Multiphase Induction Machine.
Proceedings of the IECON 2019, 2019

An Overview of Methods using Reduced-Ordered Transformation Matrices for Fault-Tolerant Control of 5-phase Machines with an Open Phase.
Proceedings of the IEEE International Conference on Industrial Technology, 2019

3-D Multi-Nodal Thermal Modelling for Fault-Tolerant Machine.
Proceedings of the IEEE International Conference on Industrial Technology, 2019

Low Speed Sensorless Control of Non-Salient Poles Multiphase PMSM.
Proceedings of the IEEE International Conference on Industrial Technology, 2019

2017
Five-phase Bi-harmonic PMSM control under voltage and currents limits.
Proceedings of the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, October 29, 2017

2016
Real-Time Switches Fault Diagnosis Based on Typical Operating Characteristics of Five-Phase Permanent-Magnetic Synchronous Machines.
IEEE Trans. Industrial Electronics, 2016

Fault-Tolerant Operation of an Open-End Winding Five-Phase PMSM Drive With Short-Circuit Inverter Fault.
IEEE Trans. Industrial Electronics, 2016

Open-switch and open-phase real time FDI process for multiphase PM Synchronous Motors.
Proceedings of the 25th IEEE International Symposium on Industrial Electronics, 2016

Adaline Neural Networks-based sensorless control of five-phase PMSM drives.
Proceedings of the IECON 2016, 2016

2015
Investigation on model predictive control of a five-phase permanent magnet synchronous machine under voltage and current limits.
Proceedings of the IEEE International Conference on Industrial Technology, 2015

2014
Analytical optimal currents for multiphase PMSMs under fault conditions and saturation.
Proceedings of the IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society, Dallas, TX, USA, October 29, 2014

2013
A Method for Fault Detection and Isolation Based on the Processing of Multiple Diagnostic Indices: Application to Inverter Faults in AC Drives.
IEEE Trans. Vehicular Technology, 2013

Fault-tolerant operation of an open-end winding five-phase PMSM drive with inverter faults.
Proceedings of the IECON 2013, 2013

2012
Computation of optimal current references for flux-weakening of multi-phase synchronous machines.
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012

2011
A Vectorial Approach for Generation of Optimal Current References for Multiphase Permanent-Magnet Synchronous Machines in Real Time.
IEEE Trans. Industrial Electronics, 2011

2008
Vectorial Approach-Based Control of a Seven-Phase Axial Flux Machine Designed for Fault Operation.
IEEE Trans. Industrial Electronics, 2008

2003
Control structures for multi-machine multi-converter systems with upstream coupling.
Mathematics and Computers in Simulation, 2003


  Loading...