Francesco Grasso

Orcid: 0000-0002-8697-2091

According to our database1, Francesco Grasso authored at least 48 papers between 2004 and 2024.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

On csauthors.net:

Bibliography

2024
Anomaly Detection for Power Quality Analysis Using Smart Metering Systems.
Sensors, September, 2024

Introduction to clustering unsupervised machine learning algorithms applied to power quality disturbances.
Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 and IoT, 2024

Power Quality Meter based on Low-Cost Smart Platform.
Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 and IoT, 2024

State of Health Prediction of Batteries for Smart Energy Grids Based on Multiple Features.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2024

2023
A Novel Methodology for Unsupervised Anomaly Detection in Industrial Electrical Systems.
IEEE Trans. Instrum. Meas., 2023

Failure Prevention in DC-DC Converters: Theoretical Approach and Experimental Application on a Zeta Converter.
IEEE Trans. Ind. Electron., 2023

Predictive Maintenance of Actuated Quarter-Turn Valves Using Artificial Intelligence.
Proceedings of the IEEE International Conference on Metrology for eXtended Reality, 2023

Prognostic Analysis of Switching Devices in DC-DC Converters.
Proceedings of the IEEE International Conference on Metrology for eXtended Reality, 2023

Temperature Sensitivity Analysis of a Power Quality Meter Using Thermal Step Test.
Proceedings of the 2023 IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2023

Improving Power Quality measurements using deep learning for disturbance classification.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2023

Anomaly Detection on Industrial Electrical Systems using Deep Learning.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2023

Autoencoders for Hourly Load Profile Reconstruction in Renewable Energy Communities.
Proceedings of the 20th IEEE International Conference on Smart Technologies, 2023

2022
Electrical Characterization Under Harsh Environment of DC-DC Converters Used in Diagnostic Systems.
IEEE Trans. Instrum. Meas., 2022

An Innovative Single Shot Power Quality Disturbance Detector Algorithm.
IEEE Trans. Instrum. Meas., 2022

CFD-driven symbolic identification of algebraic Reynolds-stress models.
J. Comput. Phys., 2022

Machine Learning-Based Monitoring of DC-DC Converters in Photovoltaic Applications.
Algorithms, 2022

Applications of Machine Learning Techniques for the Monitoring of Electrical Transmission and Distribution lines.
Proceedings of the 18th International Conference on Synthesis, 2022

Reliability Prediction of an innovative Power Quality Meter.
Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2022

Remaining Useful Life estimation for electric vehicle batteries using a similarity-based approach.
Proceedings of the IEEE International Workshop on Metrology for Automotive, 2022

Classification of Power Quality disturbances using Multi-Valued Neural Networks and Convolutional Neural Networks.
Proceedings of the International Joint Conference on Neural Networks, 2022

2021
Design and Preliminary Testing of an Electrified Directional Drilling Machine.
Proceedings of the Applications in Electronics Pervading Industry, Environment and Society, 2021

2020
Simultaneous Wireless Power and Data Transfer: Overview and Application to Electric Vehicles.
Proceedings of the IEEE International Symposium on Circuits and Systems, 2020

Mechatronic Design Optimization of an Electrical Drilling Machine for Trenchless Operations in Urban Environment.
Proceedings of the Applications in Electronics Pervading Industry, Environment and Society, 2020

2019
Development and testing of an efficient and cost-effective underwater propulsion system.
J. Syst. Control. Eng., 2019

Analytical Model of Power MOSFET Switching Losses due to Parasitic Components.
Proceedings of the 5th IEEE International forum on Research and Technology for Society and Industry, 2019

Simulation Model and Experimental Setup for Power Quality Disturbances Methodologies Testing and Validation.
Proceedings of the 5th IEEE International forum on Research and Technology for Society and Industry, 2019

Symbolic Techniques in DC-DC Converter Simulation.
Proceedings of the 5th IEEE International forum on Research and Technology for Society and Industry, 2019

Circular Coil for EV Wireless Charging Design and Optimization Considering Ferrite Saturation.
Proceedings of the 5th IEEE International forum on Research and Technology for Society and Industry, 2019

Experimental Characterization of a Micro-Turbine Generator for Energy Recovery Applications.
Proceedings of the 5th IEEE International forum on Research and Technology for Society and Industry, 2019

Testability Analysis in Neural Network Based Fault Diagnosis of DC-DC Converter.
Proceedings of the 5th IEEE International forum on Research and Technology for Society and Industry, 2019

A New Nonlinear Dynamical Model with Three Quadratic Nonlinear Terms and Hidden Chaos.
Proceedings of the 42nd International Convention on Information and Communication Technology, 2019

Sizing CMOS operational transconductance amplifiers applying NSGA-II and MOEAD.
Proceedings of the 42nd International Convention on Information and Communication Technology, 2019

2018
A Multi-Valued Neuron Based Complex ELM Neural Network.
Neural Process. Lett., 2018

Testability Analysis Based on Complex-Field Fault Modeling.
Proceedings of the 15th International Conference on Synthesis, 2018

Improvement of Power Flow Analysis based on Currents' Physical Component (CPC) Theory.
Proceedings of the IEEE International Symposium on Circuits and Systems, 2018

A multi-step approach to the single fault diagnosis of DC-DC switched power converters.
Proceedings of the IEEE International Symposium on Circuits and Systems, 2018

2017
Fault detection in Class-E<sup>2</sup> resonant converters.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017

2016
SapWin 4.0-a new simulation program for electrical engineering education using symbolic analysis.
Comput. Appl. Eng. Educ., 2016

Design of class-E ZVS inverter with loosely-coupled transformer at fixed coupling coefficient.
Proceedings of the IECON 2016, 2016

Analysis and design of full-bridge Class-DE inverter at fixed duty cycle.
Proceedings of the IECON 2016, 2016

2015
New harmonics current mitigation technique in induction motor driving reciprocating compressor.
Proceedings of the IEEE International Symposium on Systems Engineering, 2015

2014
Supporting Doctors through Mobile Multimodal Interaction and Process-Aware Execution of Clinical Guidelines.
Proceedings of the 7th IEEE International Conference on Service-Oriented Computing and Applications, 2014

2012
A double neural network for interpretation of the frequency response in the electrical equipments.
Proceedings of the 6th IEEE International Conference on Intelligent Systems, 2012

Improving operational support in hospital wards through vocal interfaces and process-awareness.
Proceedings of CBMS 2012, 2012

2009
A method for acceptability region representation in analogue linear networks.
Int. J. Circuit Theory Appl., 2009

2007
A Method for the Automatic Selection of Test Frequencies in Analog Fault Diagnosis.
IEEE Trans. Instrum. Meas., 2007

A symbolic approach to design centering of analog circuits.
Microelectron. Reliab., 2007

2004
Metodi innovativi per la diagnosi di guasto nei circuiti analogici.
PhD thesis, 2004


  Loading...