Marcantonio Catelani

Orcid: 0000-0002-9537-9724

According to our database1, Marcantonio Catelani authored at least 96 papers between 2002 and 2024.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

Online presence:

On csauthors.net:

Bibliography

2024
Temperature Sensitivity Analysis of Inertial Measurement Unit Under Dynamic Conditions.
IEEE Trans. Instrum. Meas., 2024

Experimental Characterization of Hybrid Supercapacitor Under Different Operating Conditions Using EIS Measurements.
IEEE Trans. Instrum. Meas., 2024

Life Cycle Analysis of Lithium Batteries for Smart Grids using Electrochemical Impedance Spectroscopy Data.
Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 and IoT, 2024

Lithium-ion battery dataset for data driven models' development.
Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 and IoT, 2024

Introduction to clustering unsupervised machine learning algorithms applied to power quality disturbances.
Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 and IoT, 2024

Power Quality Meter based on Low-Cost Smart Platform.
Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 and IoT, 2024

Characterization of $\text{LiFePO}_{4}$ Cells for Formula SAE's Driverless Vehicle Using Climate Tests.
Proceedings of the IEEE International Workshop on Metrology for Automotive, 2024

Impedance Analysis of Hybrid Supercapacitor using EIS under Temperature and SOC Variable Conditions.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2024

Dynamic Temperature Test of Gyroscope for Automotive Applications.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2024

State of Health Prediction of Batteries for Smart Energy Grids Based on Multiple Features.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2024

Remaining Useful Life estimation for MEMS-based transducers.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2024

2023
Analysis of Inertial Measurement Units Performances Under Dynamic Conditions.
IEEE Trans. Instrum. Meas., 2023

A Multi-Channel Deep-Learning Prediction Algorithm for Battery State-of-Health Indicator.
Proceedings of the IEEE International Conference on Metrology for eXtended Reality, 2023

Temperature Sensitivity Analysis of a Power Quality Meter Using Thermal Step Test.
Proceedings of the 2023 IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2023

Exponential degradation model for Remaining Useful Life estimation of electrolytic capacitors.
Proceedings of the IEEE International Workshop on Metrology for Automotive, 2023

Improving Power Quality measurements using deep learning for disturbance classification.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2023

An experimental setup for characterization of Inertial measurement unit under dynamic conditions.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2023

Anomaly Detection on Industrial Electrical Systems using Deep Learning.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2023

Experimental analysis for the estimation of the Arrhenius's activation energy of lithium batteries.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2023

2022
Electrical Characterization Under Harsh Environment of DC-DC Converters Used in Diagnostic Systems.
IEEE Trans. Instrum. Meas., 2022

Stress Testing for Performance Analysis of Orientation Estimation Algorithms.
IEEE Trans. Instrum. Meas., 2022

Reliability Prediction of an innovative Power Quality Meter.
Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2022

Remaining Useful Life estimation for electric vehicle batteries using a similarity-based approach.
Proceedings of the IEEE International Workshop on Metrology for Automotive, 2022

Validation of RUL estimation method for battery prognostic under different fast-charging conditions.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2022

Analysis of non-ideal remote pole in Electrical Resistivity Tomography for subsurface surveys.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2022

Temperature stress tests on low-cost IMU systems: Analysis and first proposal for enhancing performance.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2022

2021
Comparing the Effects of GPS Error on Different Electrical Resistivity Tomography Arrays for Archeological Investigations.
IEEE Trans. Instrum. Meas., 2021

Remaining Useful Life Estimation for Prognostics of Lithium-Ion Batteries Based on Recurrent Neural Network.
IEEE Trans. Instrum. Meas., 2021

Experimental Analysis of Filtering Algorithms for IMU-Based Applications Under Vibrations.
IEEE Trans. Instrum. Meas., 2021

Reliability Analysis of Wireless Sensor Network for Smart Farming Applications.
Sensors, 2021

An enhanced SHERPA (E-SHERPA) method for human reliability analysis in railway engineering.
Reliab. Eng. Syst. Saf., 2021

FMECA Assessment for Railway Safety-Critical Systems Investigating a New Risk Threshold Method.
IEEE Access, 2021

Reliability Analysis of diagnostic system for Condition Monitoring of industrial plant.
Proceedings of the 6th IEEE International Forum on Research and Technology for Society and Industry, 2021

Accelerated Testing and Reliability estimation of electronic boards for automotive applications.
Proceedings of the IEEE International Workshop on Metrology for Automotive, 2021

Reliability Allocation: an iterative approach for complex systems.
Proceedings of the IEEE International Symposium on Systems Engineering, 2021

Reliability and Functional Analysis of IMU systems under temperature-based stress tests.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2021

Effects of inaccurate electrode positioning in subsurface resistivity measurements for archeological purposes.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2021

2020
Influence of Raised Ambient Temperature on a Sensor Node Using Step-Stress Test.
IEEE Trans. Instrum. Meas., 2020

Optimizing Maintenance Policies for a Yaw System Using Reliability-Centered Maintenance and Data-Driven Condition Monitoring.
IEEE Trans. Instrum. Meas., 2020

Analysis of the Influence of the GPS Errors Occurred While Collecting Electrode Coordinates on the Electrical Resistivity of Tumuli.
Sensors, 2020

Risk Assessment of a Wind Turbine: A New FMECA-Based Tool With RPN Threshold Estimation.
IEEE Access, 2020

Characterization of a low-cost and low-power environmental monitoring system.
Proceedings of the 2020 IEEE International Instrumentation and Measurement Technology Conference, 2020

Characterization of Inertial Measurement Units under Environmental Stress Screening.
Proceedings of the 2020 IEEE International Instrumentation and Measurement Technology Conference, 2020

2019
MLMVNNN for Parameter Fault Detection in PWM DC-DC Converters and Its Applications for Buck and Boost DC-DC Converters.
IEEE Trans. Instrum. Meas., 2019

RBD Model-Based Approach for Reliability Assessment in Complex Systems.
IEEE Syst. J., 2019

Standby Redundancy for Reliability Improvement of Wireless Sensor Network.
Proceedings of the 5th IEEE International forum on Research and Technology for Society and Industry, 2019

Reliability improvement of wind turbine control system based on standby redundancy.
Proceedings of the International Symposium on Systems Engineering, 2019

Diagnostics for Temperature Sensors in Safety Instrumented Systems.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2019

2018
Reliability Allocation Procedures in Complex Redundant Systems.
IEEE Syst. J., 2018

Failure modes, mechanisms and effect analysis on temperature redundant sensor stage.
Reliab. Eng. Syst. Saf., 2018

Failure Modes and Mechanisms of Sensors Used in Oil&Gas Applications.
Proceedings of the Sensors, 2018

A proposal of uncertainty assessment for data of environmental testing: Using a machine learning procedure.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2018

Wind induced vibrations: A proposal of test profile for outdoor luminaires.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2018

Reliability analysis and electrical characterization of a Class-E resonant inverter.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2018

2017
Self-cleaning of Si photovoltaic modules by a nanostructured TiO2 spray-coating.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017

Fault detection in Class-E<sup>2</sup> resonant converters.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017

Characterization of a Si/InGaAs lateral beam splitting photovoltaic system.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017

2016
A Comparison of Alloy-Surface Finish Combinations Considering Different Component Package Types and Their Impact on Soldering Reliability.
IEEE Trans. Reliab., 2016

Practical Issues and Characterization of a Photovoltaic/Thermal Linear Focus 20× Solar Concentrator.
IEEE Trans. Instrum. Meas., 2016

Component Reliability Importance assessment on complex systems using Credible Improvement Potential.
Microelectron. Reliab., 2016

Fault detection of resonant inverters for wireless power transmission using MLMVNN.
Proceedings of the 2nd IEEE International Forum on Research and Technologies for Society and Industry Leveraging a better tomorrow, 2016

Reliability allocation assessment using MEOWA method in complex redundant systems.
Proceedings of the IEEE International Symposium on Systems Engineering, 2016

Measurements and characterization of air temperature sensors for weather stations.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2016

A condition monitoring tool based on a FMECA and FMMEA combined approach in Oil&Gas applications.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2016

2015
Ultracapacitor Degradation State Diagnosis via Electrochemical Impedance Spectroscopy.
IEEE Trans. Instrum. Meas., 2015

Evaluation of the Aging Process of Dye-Sensitized Solar Cells Under Different Stress Conditions.
IEEE Trans. Instrum. Meas., 2015

Reliability assessment for complex systems: A new approach based on RBD models.
Proceedings of the IEEE International Symposium on Systems Engineering, 2015

Linear solar PV/T concentrator monitoring system and derivation of performance index.
Proceedings of the 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2015

TTH library: A new tool for diagnostic assessment of Oil&Gas applications.
Proceedings of the 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2015

Mixed mode vibration test for luminaires devices: A new proposal.
Proceedings of the 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2015

Toward a new definition of FMECA approach.
Proceedings of the 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2015

2014
Risk assessment in the use of medical devices: A proposal to evaluate the impact of the human factor.
Proceedings of the 2014 IEEE International Symposium on Medical Measurements and Applications, 2014

Characterization of optical ageing effects on Ruthenium based Dye-Sensitized Solar Cells.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2014

Improved RBD analysis for reliability assessment in industrial application.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2014

Frequency dependent failure region definition for supercapacitors.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2014

2013
Analysis of ultracapacitors ageing in automotive application.
Microelectron. Reliab., 2013

Design and development of an accelerated testing architecture for embedded systems fault monitoring.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

Classification and analysis of failures of ultracapacitors in rail launchers applications.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

Reliability and availability analysis of an automatic highway toll collection system.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

Safety analysis in oil & gas industry in compliance with standards IEC61508 and IEC61511: Methods and applications.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

2012
Experimental Stress Characterization of a Biomedical Ultrasound Probe Soldered With Innovative Silver Isotropically Conductive Adhesive.
IEEE Trans. Instrum. Meas., 2012

A new design technique of TFT-LCD display for avionics application.
Microelectron. Reliab., 2012

Experimental tests and reliability assessment of electronic ballast system.
Microelectron. Reliab., 2012

2011
A simplified procedure for the analysis of Safety Instrumented Systems in the process industry application.
Microelectron. Reliab., 2011

Preface to the special issue on XVI IMEKO TC-4 symposium and XIII international workshop on ADC modelling and testing.
Comput. Stand. Interfaces, 2011

Software automated testing: A solution to maximize the test plan coverage and to increase software reliability and quality in use.
Comput. Stand. Interfaces, 2011

2010
Implementation and Characterization of a Medical Ultrasound Phased Array Probe With New Pb-Free Soldering Materials.
IEEE Trans. Instrum. Meas., 2010

The FMEDA approach to improve the safety assessment according to the IEC61508.
Microelectron. Reliab., 2010

2009
Northern Cross Radiotelescope: Test and Measurements of Reliability Performance on Radioreceiver Chains.
IEEE Trans. Instrum. Meas., 2009

2005
Automated selection of test frequencies for fault diagnosis in analog electronic circuits.
IEEE Trans. Instrum. Meas., 2005

2002
Automatic measurement system for degradation analysis in thin-film AlCu metallizations.
IEEE Trans. Instrum. Meas., 2002

Soft fault detection and isolation in analog circuits: some results and a comparison between a fuzzy approach and radial basis function networks.
IEEE Trans. Instrum. Meas., 2002

SBT soft fault diagnosis in analog electronic circuits: a sensitivity-based approach by randomized algorithms.
IEEE Trans. Instrum. Meas., 2002

Pseudo Time-Variant parameters in centrifugal compressor availability studies by means of Markov models.
Microelectron. Reliab., 2002

A Custom-designed automatic measurement system for acquisition and management of reliability data.
Microelectron. Reliab., 2002

On the reliability of instruments for environmental monitoring: some practical considerations.
Microelectron. Reliab., 2002


  Loading...