Hong-Zhong Huang

Orcid: 0000-0003-4478-8349

According to our database1, Hong-Zhong Huang authored at least 131 papers between 2004 and 2024.

Collaborative distances:
  • Dijkstra number2 of four.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

On csauthors.net:

Bibliography

2024
System-Level Performance Degradation Prediction for Power Converters Based on SSA-Elman NN and Empirical Knowledge.
IEEE Trans. Ind. Informatics, February, 2024

Correction to: A new inherent reliability modeling and analysis method based on imprecise Dirichlet model for machine tool spindle.
Ann. Oper. Res., January, 2024

2023
AGP-MCS+D: An active learning reliability analysis method combining dependent Gaussian process and Monte Carlo simulation.
Reliab. Eng. Syst. Saf., December, 2023

Reliability analysis for command-and-control systems based on edge extension diagram and binary decision diagram.
Qual. Reliab. Eng. Int., December, 2023

Fatigue reliability analysis and assessment of offshore wind turbine blade adhesive bonding under the coupling effects of multiple environmental stresses.
Reliab. Eng. Syst. Saf., October, 2023

A probabilistic fatigue life prediction method under random combined high and low cycle fatigue load history.
Reliab. Eng. Syst. Saf., October, 2023

Reliability analysis and optimization of multi-phased spaceflight with backup missions and mixed redundancy strategy.
Reliab. Eng. Syst. Saf., September, 2023

A heuristic maintenance scheduling framework for a military aircraft fleet under limited maintenance capacities.
Reliab. Eng. Syst. Saf., July, 2023

A multiaxial probabilistic fatigue life prediction method for nickel-based single crystal turbine blade considering mean stress correction.
Qual. Reliab. Eng. Int., July, 2023

Fault tree analysis improvements: A bibliometric analysis and literature review.
Qual. Reliab. Eng. Int., July, 2023

A method for time-varying reliability calculation of RC bridges considering random deterioration process.
Qual. Reliab. Eng. Int., July, 2023

Accuracy analysis of satellite antenna panel expansion based on BP neural network.
Qual. Reliab. Eng. Int., July, 2023

Kriging-based reliability analysis for a multi-output structural system with multiple response Gaussian process.
Qual. Reliab. Eng. Int., July, 2023

Reliability modeling for power converter in satellite considering periodic phased mission.
Reliab. Eng. Syst. Saf., April, 2023

Fusing Conflicting Multisource Imprecise Information for Reliability Assessment of Multistate Systems: A Two-Stage Optimization Approach.
IEEE Trans. Reliab., March, 2023

Information flow-based second-order cone programming model for big data using rough concept lattice.
Neural Comput. Appl., 2023

2022
Measuring Conflicts of Multisource Imprecise Information in Multistate System Reliability Assessment.
IEEE Trans. Reliab., 2022

A new preventive maintenance strategy optimization model considering lifecycle safety.
Reliab. Eng. Syst. Saf., 2022

An evidential network-based hierarchical method for system reliability analysis with common cause failures and mixed uncertainties.
Reliab. Eng. Syst. Saf., 2022

Reliability assessment of non-repairable multi-state phased mission systems with backup missions.
Reliab. Eng. Syst. Saf., 2022

Bayesian information fusion method for reliability analysis with failure-time data and degradation data.
Qual. Reliab. Eng. Int., 2022

A framework for fatigue reliability analysis of high-pressure turbine blades.
Ann. Oper. Res., 2022

A new inherent reliability modeling and analysis method based on imprecise Dirichlet model for machine tool spindle.
Ann. Oper. Res., 2022

Reliability analysis of multi-state systems with common cause failures based on Bayesian network and fuzzy probability.
Ann. Oper. Res., 2022

2021
An adaptive hybrid evolutionary algorithm and its application in aeroengine maintenance scheduling problem.
Soft Comput., 2021

Time-variant system reliability analysis method for a small failure probability problem.
Reliab. Eng. Syst. Saf., 2021

Integrated production planning and preventive maintenance scheduling for synchronized parallel machines.
Reliab. Eng. Syst. Saf., 2021

A Markov regenerative process model for phased mission systems under internal degradation and external shocks.
Reliab. Eng. Syst. Saf., 2021

An algorithm of discrete-time Bayesian network for reliability analysis of multilevel system with warm spare gate.
Qual. Reliab. Eng. Int., 2021

2020
An Enhanced Deep Learning-Based Fusion Prognostic Method for RUL Prediction.
IEEE Trans. Reliab., 2020

Time-variant reliability analysis for industrial robot RV reducer under multiple failure modes using Kriging model.
Reliab. Eng. Syst. Saf., 2020

Redundancy allocation problem of phased-mission system with non-exponential components and mixed redundancy strategy.
Reliab. Eng. Syst. Saf., 2020

Optimal mission abort policies for multistate systems.
Reliab. Eng. Syst. Saf., 2020

Reliability assessment for systems suffering common cause failure based on Bayesian networks and proportional hazards model.
Qual. Reliab. Eng. Int., 2020

Fault prognosis using deep convolutional neural network and bootstrap-based method.
Proceedings of the 18th IEEE International Conference on Industrial Informatics, 2020

2019
A Bidirectional LSTM Prognostics Method Under Multiple Operational Conditions.
IEEE Trans. Ind. Electron., 2019

Dynamic availability and performance deficiency of common bus systems with imperfectly repairable components.
Reliab. Eng. Syst. Saf., 2019

Optimization of partial software rejuvenation policy.
Reliab. Eng. Syst. Saf., 2019

Dynamic demand satisfaction probability of consecutive sliding window systems with warm standby components.
Reliab. Eng. Syst. Saf., 2019

Scheduling of imperfect inspections for reliability critical systems with shock-driven defects and delayed failures.
Reliab. Eng. Syst. Saf., 2019

Tolerance-based reliability and optimization design of switched-mode power supply.
Qual. Reliab. Eng. Int., 2019

Analysis and optimal design of systems operating in a random environment and having a rescue option.
Int. J. Gen. Syst., 2019

2018
Dynamic reliability modeling for system analysis under complex load.
Reliab. Eng. Syst. Saf., 2018

Reliability analysis of complex multi-state system with common cause failure based on evidential networks.
Reliab. Eng. Syst. Saf., 2018

Reliability assessment of phased-mission systems under random shocks.
Reliab. Eng. Syst. Saf., 2018

Reliability analysis of phased mission system with non-exponential and partially repairable components.
Reliab. Eng. Syst. Saf., 2018

An interactive preference-based evolutionary algorithm for multi-criteria satisficing optimization.
J. Intell. Fuzzy Syst., 2018

Fault diagnosis method based on supervised particle swarm optimization classification algorithm.
Intell. Data Anal., 2018

Physics of failure-based reliability prediction of turbine blades using multi-source information fusion.
Appl. Soft Comput., 2018

2017
Bayesian Degradation Analysis With Inverse Gaussian Process Models Under Time-Varying Degradation Rates.
IEEE Trans. Reliab., 2017

Near-extreme system condition and near-extreme remaining useful time for a group of products.
Reliab. Eng. Syst. Saf., 2017

2016
Condition-Based Maintenance With Scheduling Threshold and Maintenance Threshold.
IEEE Trans. Reliab., 2016

Bivariate Analysis of Incomplete Degradation Observations Based on Inverse Gaussian Processes and Copulas.
IEEE Trans. Reliab., 2016

Probabilistic Physics of Failure-based framework for fatigue life prediction of aircraft gas turbine discs under uncertainty.
Reliab. Eng. Syst. Saf., 2016

Reliability of complex systems under dynamic conditions: A Bayesian multivariate degradation perspective.
Reliab. Eng. Syst. Saf., 2016

Reliability assessment of complex electromechanical systems under epistemic uncertainty.
Reliab. Eng. Syst. Saf., 2016

Non-probabilistic uncertain static responses of imprecisely defined structures with fuzzy parameters.
J. Intell. Fuzzy Syst., 2016

Interaction balance optimization in multidisciplinary design optimization problems.
Concurr. Eng. Res. Appl., 2016

2015
Leveraging Degradation Testing and Condition Monitoring for Field Reliability Analysis With Time-Varying Operating Missions.
IEEE Trans. Reliab., 2015

Belief Universal Generating Function Analysis of Multi-State Systems Under Epistemic Uncertainty and Common Cause Failures.
IEEE Trans. Reliab., 2015

Dynamic Reliability Assessment for Multi-State Systems Utilizing System-Level Inspection Data.
IEEE Trans. Reliab., 2015

Bayesian Reliability and Performance Assessment for Multi-State Systems.
IEEE Trans. Reliab., 2015

Quantification Classification Algorithm of Multiple Sources of Evidence.
Int. J. Inf. Technol. Decis. Mak., 2015

2014
Inverse Gaussian process models for degradation analysis: A Bayesian perspective.
Reliab. Eng. Syst. Saf., 2014

A new simulation model for assessing aircraft emergency evacuation considering passenger physical characteristics.
Reliab. Eng. Syst. Saf., 2014

2013
A Multiphase Decision Model for System Reliability Growth With Latent Failures.
IEEE Trans. Syst. Man Cybern. Syst., 2013

A Bayesian Approach for System Reliability Analysis With Multilevel Pass-Fail, Lifetime and Degradation Data Sets.
IEEE Trans. Reliab., 2013

A Joint Redundancy and Imperfect Maintenance Strategy Optimization for Multi-State Systems.
IEEE Trans. Reliab., 2013

Life cycle reliability assessment of new products - A Bayesian model updating approach.
Reliab. Eng. Syst. Saf., 2013

Importance identification for fault trees based on possibilistic information measurements.
J. Intell. Fuzzy Syst., 2013

Reliability prediction for evolutionary product in the conceptual design phase using neural network-based fuzzy synthetic assessment.
Int. J. Syst. Sci., 2013

Bayesian Reliability Estimation for Deteriorating Systems with Limited Samples Using the Maximum Entropy Approach.
Entropy, 2013

A Pareto set coordination method for analytical target cascading.
Concurr. Eng. Res. Appl., 2013

2012
A Data-Driven Approach to Selecting Imperfect Maintenance Models.
IEEE Trans. Reliab., 2012

A New Ordering Method of Basic Events in Fault Tree Analysis.
Qual. Reliab. Eng. Int., 2012

A New Multidisciplinary Design Optimization Method Accounting for Discrete and Continuous Variables under Aleatory and Epistemic Uncertainties.
Int. J. Comput. Intell. Syst., 2012

Reliability Analysis of Structure for Fuzzy Safety State.
Intell. Autom. Soft Comput., 2012

2011
An Approach to Reliability Assessment Under Degradation and Shock Process.
IEEE Trans. Reliab., 2011

Grid Service Reliability Modeling and Optimal Task Scheduling Considering Fault Recovery.
IEEE Trans. Reliab., 2011

Modeling and Analysis of Grid Service Reliability Considering Fault Recovery.
New Gener. Comput., 2011

Optimal Replacement Policy for Fuzzy Multi-State Element.
J. Multiple Valued Log. Soft Comput., 2011

A novel information fusion method based on Dempster-Shafer evidence theory for conflict resolution.
Intell. Data Anal., 2011

A New Method for Achieving Flexibility in Hierarchical Multilevel System Design.
Concurr. Eng. Res. Appl., 2011

Collaborative Reliability Analysis under the Environment of Multidisciplinary Design Optimization.
Concurr. Eng. Res. Appl., 2011

Reliability analysis on competitive failure processes under fuzzy degradation data.
Appl. Soft Comput., 2011

2010
Optimal Replacement Policy for Multi-State System Under Imperfect Maintenance.
IEEE Trans. Reliab., 2010

Optimal Selective Maintenance Strategy for Multi-State Systems Under Imperfect Maintenance.
IEEE Trans. Reliab., 2010

Neurocomputing method based on structural finite element analysis of discrete model.
Neural Comput. Appl., 2010

Posbist Reliability Theory of k-out-of-n: G System.
J. Multiple Valued Log. Soft Comput., 2010

Reliability assessment for fuzzy multi-state systems.
Int. J. Syst. Sci., 2010

Petri Net-based Coordination Component for Collaborative Design.
Concurr. Eng. Res. Appl., 2010

Analysis of maintenance policies for finite life-cycle multi-state systems.
Comput. Ind. Eng., 2010

2009
A Discrete Stress-Strength Interference Model With Stress Dependent Strength.
IEEE Trans. Reliab., 2009

Comment on "A framework to practical predictive maintenance modeling for multi-state systems" by Tan C.M. and Raghavan N. [Reliab Eng Syst Saf 2008;93(8): 1138-50].
Reliab. Eng. Syst. Saf., 2009

GA Based Fuzzy Multi-objective Robust Design.
J. Multiple Valued Log. Soft Comput., 2009

2008
Reliability-Redundancy Allocation for Multi-State Series-Parallel Systems.
IEEE Trans. Reliab., 2008

Reliability Bounds for Multi-State k-out-of-n Systems.
IEEE Trans. Reliab., 2008

Multidisciplinary collaborative optimization using fuzzy satisfaction degree and fuzzy sufficiency degree model.
Soft Comput., 2008

A discrete stress-strength interference model based on universal generating function.
Reliab. Eng. Syst. Saf., 2008

Neurocomputing for Fuzzy Finite Element Analysis of Structures Based on Fuzzy Coefficient Programming.
J. Multiple Valued Log. Soft Comput., 2008

Neural-network-driven Fuzzy Reasoning of Dependency Relationships among Product Development Processes.
Concurr. Eng. Res. Appl., 2008

2007
Neural Networks for Reliability-Based Optimal Design.
Proceedings of the Intelligence in Reliability Engineering: New Metaheuristics, 2007

Optimal Redundancy Allocation of Multi-State Systems with Genetic Algorithms.
Proceedings of the Computational Intelligence in Reliability Engineering: Evolutionary Techniques in Reliability Analysis and Optimization, 2007

Posbist Reliability Theory for Coherent Systems.
Proceedings of the Intelligence in Reliability Engineering: New Metaheuristics, 2007

Intelligent Interactive Multiobjective Optimization of System Reliability.
Proceedings of the Computational Intelligence in Reliability Engineering: Evolutionary Techniques in Reliability Analysis and Optimization, 2007

Graph Theory-based Logic Relationship Programming of Product Development Process.
Concurr. Eng. Res. Appl., 2007

Satisficing Approximation Response Model Based on Neural Network in Multidisciplinary Collaborative Optimization.
Proceedings of the Advances in Neural Networks, 2007

Early Software Quality Prediction Based on a Fuzzy Neural Network Model.
Proceedings of the Third International Conference on Natural Computation, 2007

A Review of Possibilistic Approaches to Reliability Analysis and Optimization in Engineering Design.
Proceedings of the Human-Computer Interaction. HCI Applications and Services, 2007

2006
A fuzzy set based solution method for multiobjective optimal design problem of mechanical and structural systems using functional-link net.
Neural Comput. Appl., 2006

Bayesian reliability analysis for fuzzy lifetime data.
Fuzzy Sets Syst., 2006

An interactive fuzzy multi-objective optimization method for engineering design.
Eng. Appl. Artif. Intell., 2006

Modeling the Product Development Process as a Dynamic System with Feedback.
Concurr. Eng. Res. Appl., 2006

Product Development Process Modeling Based on Information Feedback and Requirement Cooperation.
Concurr. Eng. Res. Appl., 2006

Development Mode Based on Integration of Product Models and Process Models.
Concurr. Eng. Res. Appl., 2006

A Novel Hybrid System with Neural Networks and Hidden Markov Models in Fault Diagnosis.
Proceedings of the MICAI 2006: Advances in Artificial Intelligence, 2006

Modeling the Product Development Process as a Dynamic System with Feedback.
Proceedings of the Research and Practical Issues of Enterprise Information Systems, 2006

Evidence Relationship Matrix and Its Application to D-S Evidence Theory for Information Fusion.
Proceedings of the Intelligent Data Engineering and Automated Learning, 2006

An Interactive Preference-Weight Genetic Algorithm for Multi-criterion Satisficing Optimization.
Proceedings of the Advances in Natural Computation, Second International Conference, 2006

RAOGA-Based Fuzzy Neural Network Model of Design Evaluation.
Proceedings of the Computational Intelligence, 2006

A Study of Product Development Time Based on Fuzzy Timed Workflow Net.
Proceedings of the Computational Intelligence, 2006

2005
A coordination method for fuzzy multi-objective optimization of system reliability.
J. Intell. Fuzzy Syst., 2005

Perturbation finite element method of structural analysis under fuzzy environments.
Eng. Appl. Artif. Intell., 2005

Functional-Link Net Based Multiobjective Fuzzy Optimization.
Proceedings of the Advances in Neural Networks - ISNN 2005, Second International Symposium on Neural Networks, Chongqing, China, May 30, 2005

Application of Neural Network to Interactive Physical Programming.
Proceedings of the Advances in Neural Networks - ISNN 2005, Second International Symposium on Neural Networks, Chongqing, China, May 30, 2005

The Fuzzy-Logic-Based Reasoning Mechanism for Product Development Process.
Proceedings of the Fuzzy Systems and Knowledge Discovery, Second International Conference, 2005

2004
Posbist fault tree analysis of coherent systems.
Reliab. Eng. Syst. Saf., 2004

Fuzzy Mapping Between Physical Domain And Function Domain In Design Process.
Int. J. Uncertain. Fuzziness Knowl. Based Syst., 2004

Finite Element Analysis of Structures Based on Linear Saturated System Model.
Proceedings of the Advances in Neural Networks, 2004

Optimal Design of Conic-Cylindrical Gear Reduction Unit Using Fuzzy Physical Programming.
Proceedings of the Intelligent Information Processing II, 2004

Hierarchical Timed Colored Petri Nets Based Product Development Process Modeling.
Proceedings of the Computer Supported Cooperative Work in Design I, 2004


  Loading...