Ming Jian Zuo
Orcid: 0000-0002-8607-2923Affiliations:
- University of Alberta, Edomonton, Canada
According to our database1,
Ming Jian Zuo
authored at least 122 papers
between 1998 and 2024.
Collaborative distances:
Collaborative distances:
Timeline
Legend:
Book In proceedings Article PhD thesis Dataset OtherLinks
Online presence:
-
on orcid.org
On csauthors.net:
Bibliography
2024
Adaptive Local Flaw Detection Based on Magnetic Flux Leakage Images With a Noise Distortion Effect for Steel Wire Ropes.
IEEE Trans. Ind. Electron., April, 2024
2023
Condition-based maintenance optimization for multi-component systems considering prognostic information and degraded working efficiency.
Reliab. Eng. Syst. Saf., June, 2023
Sensors, January, 2023
A Three-Dimensional Vibration Data Compression Method for Rolling Bearing Condition Monitoring.
IEEE Trans. Instrum. Meas., 2023
Fully Simulated-Data-Driven Transfer-Learning Method for Rolling-Bearing-Fault Diagnosis.
IEEE Trans. Instrum. Meas., 2023
2022
IEEE Trans. Reliab., 2022
IEEE Trans. Instrum. Meas., 2022
Normalization of gearbox vibration signal for tooth crack diagnosis under variable speed conditions.
Qual. Reliab. Eng. Int., 2022
Qual. Reliab. Eng. Int., 2022
Optimal structure screening for large-scale multi-state series-parallel systems based on structure ordinal optimization.
IISE Trans., 2022
2021
IEEE Trans. Reliab., 2021
Planetary Gearbox Dynamic Modeling Considering Bearing Clearance and Sun Gear Tooth Crack.
Sensors, 2021
Optimum component reassignment for balanced systems with multi-state components operating in a shock environment.
Reliab. Eng. Syst. Saf., 2021
Optimal mission abort policy with multiple abort criteria for a balanced system with multi-state components.
Comput. Ind. Eng., 2021
2020
Predicting Remaining Useful Life of Rolling Bearings Based on Deep Feature Representation and Transfer Learning.
IEEE Trans. Instrum. Meas., 2020
Multibranch and Multiscale CNN for Fault Diagnosis of Wheelset Bearings Under Strong Noise and Variable Load Condition.
IEEE Trans. Ind. Informatics, 2020
An improved model for dependent competing risks considering continuous degradation and random shocks.
Reliab. Eng. Syst. Saf., 2020
A general discrete degradation model with fatal shocks and age- and state-dependent nonfatal shocks.
Reliab. Eng. Syst. Saf., 2020
2019
IEEE Trans. Reliab., 2019
Approximate Reliability Evaluation of Large-Scale Multistate Series-Parallel Systems.
IEEE Trans. Reliab., 2019
Induction Motor Stator Current AM-FM Model and Demodulation Analysis for Planetary Gearbox Fault Diagnosis.
IEEE Trans. Ind. Informatics, 2019
Editorial - Impact of Prognostics and Health Management in Systems Reliability and Maintenance Planning.
Reliab. Eng. Syst. Saf., 2019
Ann. Oper. Res., 2019
Proceedings of the 2019 IEEE International Conference on Prognostics and Health Management, 2019
2018
A new adaptive sequential sampling method to construct surrogate models for efficient reliability analysis.
Reliab. Eng. Syst. Saf., 2018
Optimal allocation of reliability improvement target based on the failure risk and improvement cost.
Reliab. Eng. Syst. Saf., 2018
Reliab. Eng. Syst. Saf., 2018
Time series modeling of vibration signals from a gearbox under varying speed and load condition.
Proceedings of the 2018 IEEE International Conference on Prognostics and Health Management, 2018
A New Strategy for Rotating Machinery Fault Diagnosis Under Varying Speed Conditions Based on Deep Neural Networks and Order Tracking.
Proceedings of the 17th IEEE International Conference on Machine Learning and Applications, 2018
2017
Effect of Truncated Input Parameter Distribution on the Integrity of Safety Instrumented Systems Under Epistemic Uncertainty.
IEEE Trans. Reliab., 2017
Markov process based time limited dispatch analysis with constraints of both dispatch reliability and average safety levels.
Reliab. Eng. Syst. Saf., 2017
Optimal selective maintenance for multi-state systems in variable loading conditions.
Reliab. Eng. Syst. Saf., 2017
Reliab. Eng. Syst. Saf., 2017
Adaptive Mode Decomposition Methods and Their Applications in Signal Analysis for Machinery Fault Diagnosis: A Review With Examples.
IEEE Access, 2017
Effect of sliding friction on transient characteristics of a gear transmission under random loading.
Proceedings of the 2017 IEEE International Conference on Systems, Man, and Cybernetics, 2017
2016
IEEE Trans. Reliab., 2016
Evaluating the reliability of multi-body mechanisms: A method considering the uncertainties of dynamic performance.
Reliab. Eng. Syst. Saf., 2016
An efficient method for evaluating the effect of input parameters on the integrity of safety systems.
Reliab. Eng. Syst. Saf., 2016
Reliab. Eng. Syst. Saf., 2016
Derating design for optimizing reliability and cost with an application to liquid rocket engines.
Reliab. Eng. Syst. Saf., 2016
Reliab. Eng. Syst. Saf., 2016
2015
A Non-Probabilistic Metric Derived From Condition Information for Operational Reliability Assessment of Aero-Engines.
IEEE Trans. Reliab., 2015
Dynamic Reliability Assessment for Multi-State Systems Utilizing System-Level Inspection Data.
IEEE Trans. Reliab., 2015
IEEE Trans. Reliab., 2015
IEEE Trans. Reliab., 2015
Reliab. Eng. Syst. Saf., 2015
An Analytical Approach to Fast Parameter Selection of Gaussian RBF Kernel for Support Vector Machine.
J. Inf. Sci. Eng., 2015
2014
IEEE Trans. Reliab., 2014
IEEE Trans. Reliab., 2014
Reliab. Eng. Syst. Saf., 2014
An integrated framework for online diagnostic and prognostic health monitoring using a multistate deterioration process.
Reliab. Eng. Syst. Saf., 2014
Selective maintenance for multi-state series-parallel systems under economic dependence.
Reliab. Eng. Syst. Saf., 2014
Adv. Data Anal. Classif., 2014
2013
Life cycle reliability assessment of new products - A Bayesian model updating approach.
Reliab. Eng. Syst. Saf., 2013
Reliab. Eng. Syst. Saf., 2013
A new reliability allocation weight for reducing the occurrence of severe failure effects.
Reliab. Eng. Syst. Saf., 2013
2012
A parameter estimation method for a condition-monitored device under multi-state deterioration.
Reliab. Eng. Syst. Saf., 2012
Optimizing the Periodic Inspection Interval for a 1-out-of-2 Cold Standby System Using the Delay-Time Concept.
Qual. Reliab. Eng. Int., 2012
Crack propagation assessment for spur gears using model-based analysis and simulation.
J. Intell. Manuf., 2012
A data clustering algorithm for stratified data partitioning in artificial neural network.
Expert Syst. Appl., 2012
Expert Syst. Appl., 2012
2011
Reliability and Availability Analysis of a Repairable k-out-of-n: G System With R Repairmen Subject to Shut-Off Rules.
IEEE Trans. Reliab., 2011
Availability of a general k-out-of-n: G system with non-identical components considering shut-off rules using quasi-birth-death process.
Reliab. Eng. Syst. Saf., 2011
Optimal Design of a Multi-State Weighted Series-Parallel System Using Physical Programming and Genetic Algorithms.
Asia Pac. J. Oper. Res., 2011
2010
IEEE Trans. Reliab., 2010
IEEE Trans. Reliab., 2010
The Hierarchical Weighted Multi-State k -out-of- n System Model and Its Application for Infrastructure Management.
IEEE Trans. Reliab., 2010
A Framework for Reliability Approximation of Multi-State Weighted k -out-of- n Systems.
IEEE Trans. Reliab., 2010
Reliability estimation in a Weibull lifetime distribution with zero-failure field data.
Qual. Reliab. Eng. Int., 2010
Expert Syst. Appl., 2010
Group judgment of relationship between product reliability and quality characteristics based on Bayesian theory and expert's experience.
Expert Syst. Appl., 2010
Proceedings of the Rough Sets and Current Trends in Computing, 2010
Two dimensional analytic wavelet thresholding and its application to ultrasonic pulse-echo B-scan denoising.
Proceedings of the 23rd Canadian Conference on Electrical and Computer Engineering, 2010
2009
A joint reliability-redundancy optimization approach for multi-state series-parallel systems.
Reliab. Eng. Syst. Saf., 2009
Reliab. Eng. Syst. Saf., 2009
Oper. Res. Lett., 2009
Experimental studies of crack sizing and location based on ultrasonic nondestructive testing.
Proceedings of the IEEE International Conference on Robotics and Biomimetics, 2009
2008
IEEE Trans. Reliab., 2008
IEEE Trans. Reliab., 2008
Reliab. Eng. Syst. Saf., 2008
Reliab. Eng. Syst. Saf., 2008
2007
Proceedings of the Intelligence in Reliability Engineering: New Metaheuristics, 2007
Proceedings of the Computational Intelligence in Reliability Engineering: Evolutionary Techniques in Reliability Analysis and Optimization, 2007
Proceedings of the Intelligence in Reliability Engineering: New Metaheuristics, 2007
Proceedings of the Computational Intelligence in Reliability Engineering: Evolutionary Techniques in Reliability Analysis and Optimization, 2007
Reliab. Eng. Syst. Saf., 2007
Reliab. Eng. Syst. Saf., 2007
Proceedings of IEEE International Conference on Communications, 2007
Proceedings of the 6th International Workshop on Design and Reliable Communication Networks, 2007
2006
IEEE Trans. Reliab., 2006
Recursive formulas for the reliability of multi-state consecutive-k-out-of-n: G systems.
IEEE Trans. Reliab., 2006
Redundancy allocation for multi-state systems using physical programming and genetic algorithms.
Reliab. Eng. Syst. Saf., 2006
Reliability analysis of a repairable k-out-of-n system with some components being suspended when the system is down.
Reliab. Eng. Syst. Saf., 2006
Fault diagnosis of machines based on D-S evidence theory. Part 2: Application of the improved D-S evidence theory in gearbox fault diagnosis.
Pattern Recognit. Lett., 2006
Fault diagnosis of machines based on D-S evidence theory. Part 1: D-S evidence theory and its improvement.
Pattern Recognit. Lett., 2006
A fuzzy set based solution method for multiobjective optimal design problem of mechanical and structural systems using functional-link net.
Neural Comput. Appl., 2006
Proceedings of the 9th International Conference on Information Fusion, 2006
Proceedings of the Canadian Conference on Electrical and Computer Engineering, 2006
2005
Proceedings of the Advances in Neural Networks - ISNN 2005, Second International Symposium on Neural Networks, Chongqing, China, May 30, 2005
2004
A multi-criterion evaluation approach to selection of the best statistical distribution.
Comput. Ind. Eng., 2004
2003
A method for evaluation of reliability indices for repairable circular consecutive-k-out-of-n: F systems.
Reliab. Eng. Syst. Saf., 2003
Using neural network function approximation for optimal design of continuous-state parallel-series systems.
Comput. Oper. Res., 2003
Gearbox fault diagnosis using independent component analysis in the frequency domain and wavelet filtering.
Proceedings of the 2003 IEEE International Conference on Acoustics, 2003
2002
J. Oper. Res. Soc., 2002
2001
Reliab. Eng. Syst. Saf., 2001
Optimal replacement policy for a deteriorating production system with preventive maintenance.
Int. J. Syst. Sci., 2001
2000
Reliability evaluation of combined k-out-of-n: F, consecutive-k-out-of-n: F and linear connected-(r, s)-out-of-(m, n): F system structures.
IEEE Trans. Reliab., 2000
Reliability analysis for a circular consecutive-2-out-of-n: F repairable system with priority in repair.
Reliab. Eng. Syst. Saf., 2000
Optimal system design considering warranty, periodic preventive maintenance, and minimal repair.
J. Oper. Res. Soc., 2000
Eur. J. Oper. Res., 2000
1998
Object-oriented Petri nets with changeable structure (OPNs-CS): analysis on conflicts and deadlocks.
Proceedings of the IEEE International Conference on Systems, Man and Cybernetics, 1998