In Gwun Jang
Orcid: 0000-0002-5250-1208
According to our database1,
In Gwun Jang
authored at least 18 papers
between 2013 and 2023.
Collaborative distances:
Collaborative distances:
Timeline
Legend:
Book In proceedings Article PhD thesis Dataset OtherLinks
On csauthors.net:
Bibliography
2023
Loop-Wise Route Representation and Its Optimization Formulation for Symmetric Traveling Salesman Problems.
IEEE Trans. Intell. Transp. Syst., September, 2023
Topology Optimization of the IPMSMs Considering Both the MTPA and FW Controls Under the Voltage and Current Limitations.
IEEE Trans. Ind. Electron., August, 2023
Topology Optimization for the Manufacturable and Structurally Safe Synchronous Reluctance Motors With Multiple Iron Webs and Bridges.
IEEE Trans. Ind. Electron., 2023
Topology Optimization Framework for Simultaneously Determining the Optimal Structural Design and Current Phase Angle of the IPMSMs for the MTPA Control.
IEEE Trans. Ind. Electron., 2023
2022
Adaptive Equivalent Consumption Minimization Strategy (A-ECMS) for the HEVs With a Near-Optimal Equivalent Factor Considering Driving Conditions.
IEEE Trans. Veh. Technol., 2022
Framework of sampling the subject-specific static loads from the gait cycle of interindividual variation.
Comput. Methods Programs Biomed., 2022
Loopwise Route Representation-Based Topology Optimization for the Shortest Path Problems.
IEEE Access, 2022
2021
Determination of the representative static loads for cyclically repeated dynamic loads: a case study of bone remodeling simulation with gait loads.
Comput. Methods Programs Biomed., 2021
Evaluating the Maximum Directional Kinematic Capability of a Redundant Manipulator Based on Allowable Velocity and Force.
IEEE Access, 2021
Unit Module-Based Convergence Acceleration for Topology Optimization Using the Spatiotemporal Deep Neural Network.
IEEE Access, 2021
2020
Optimization-Based Investigation of Bioinspired Variable Gearing of the Distributed Actuation Mechanism to Maximize Velocity and Force.
IEEE Robotics Autom. Lett., 2020
2019
Patient-Specific Phantomless Estimation of Bone Mineral Density and Its Effects on Finite Element Analysis Results: A Feasibility Study.
Comput. Math. Methods Medicine, 2019
2018
Fully automated segmentation of a hip joint using the patient-specific optimal thresholding and watershed algorithm.
Comput. Methods Programs Biomed., 2018
2017
Simulation-Based Feasibility Study on the Wireless Charging Railway System With a Ferriteless Primary Module.
IEEE Trans. Veh. Technol., 2017
2015
Traffic Signal Optimization for Oversaturated Urban Networks: Queue Growth Equalization.
IEEE Trans. Intell. Transp. Syst., 2015
2014
Structural Optimization of a Novel 6-DOF Pose Sensor System for Enhancing Noise Robustness at a Long Distance.
IEEE Trans. Ind. Electron., 2014
Proceedings of the IEEE International Systems Conference, 2014
2013
Developing Accurate Long-Distance 6-DOF Motion Detection With One-Dimensional Laser Sensors: Three-Beam Detection System.
IEEE Trans. Ind. Electron., 2013