Markku Niemela

Orcid: 0000-0002-9359-245X

According to our database1, Markku Niemela authored at least 30 papers between 2003 and 2023.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of five.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

On csauthors.net:

Bibliography

2023
On the Application of Extended Grounded Slot Electrodes to Reduce Noncirculating Bearing Currents.
IEEE Trans. Ind. Electron., 2023

2021
Mitigating Noncirculating Bearing Currents by a Correct Stator Magnetic Circuit and Winding Design.
IEEE Trans. Ind. Electron., 2021

Mitigation of Inverter-Induced Noncirculating Bearing Currents by Introducing Grounded Electrodes into Stator Slot Openings.
IEEE Trans. Ind. Electron., 2021

Exciter Remanence Effect Mitigation in a Brushless Synchronous Generator for Test-field Applications.
Proceedings of the IECON 2021, 2021

2020
Fault-Tolerant Modular Stator Concentrated Winding Permanent Magnet Machine.
IEEE Access, 2020

2019
High-Torque-Density IPMSM Rotor Pole Geometry Adjustment for Smooth Torque.
IEEE Access, 2019

Performance of a Direct-Liquid-Cooled Motor in an Electric Bus Under Different Load Cycles.
IEEE Access, 2019

The Instrumentation Influence on the Motor Loss Determination Uncertainty.
Proceedings of the IECON 2019, 2019

Experimental Investigation of the Losses and Efficiency of 75 kW Induction Motor Drive System.
Proceedings of the IECON 2019, 2019

2018
Variable-Speed-Drive-Based Estimation of the Leakage Rate in Compressed Air Systems.
IEEE Trans. Ind. Electron., 2018

2017
Rotor Surface Ferrite Permanent Magnets in Electrical Machines: Advantages and Limitations.
IEEE Trans. Ind. Electron., 2017

Experimental and FEM verification of cogging forces of a permanent magnet linear motor with a discontinuous magnet track.
Proceedings of the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, October 29, 2017

Technology comparison of induction motor and synchronous reluctance motor.
Proceedings of the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, October 29, 2017

2016
Online Identification of a Mechanical System in Frequency Domain Using Sliding DFT.
IEEE Trans. Ind. Electron., 2016

Multidisciplinary Design of a Permanent-Magnet Traction Motor for a Hybrid Bus Taking the Load Cycle into Account.
IEEE Trans. Ind. Electron., 2016

Soft-Sensor-Based Flow Rate and Specific Energy Estimation of Industrial Variable-Speed-Driven Twin Rotary Screw Compressor.
IEEE Trans. Ind. Electron., 2016

Analysis of 37-kW Converter-Fed Induction Motor Losses.
IEEE Trans. Ind. Electron., 2016

Application of Calorimetric Method for Loss Measurement of a SynRM Drive System.
IEEE Trans. Ind. Electron., 2016

Hardware-in-loop emulator for water electrolysers.
Proceedings of the IECON 2016, 2016

PWM power distribution and switching frequency analysis in motor drives.
Proceedings of the IECON 2016, 2016

2015
Online Estimation of Linear Tooth Belt Drive System Parameters.
IEEE Trans. Ind. Electron., 2015

2014
Loss Definition of Electric Drives by a Calorimetric System With Data Processing.
IEEE Trans. Ind. Electron., 2014

2013
Detection of Mass Increase in a Fan Impeller With a Frequency Converter.
IEEE Trans. Ind. Electron., 2013

Design Principles of Permanent Magnet Synchronous Machines for Parallel Hybrid or Traction Applications.
IEEE Trans. Ind. Electron., 2013

Scalable open- and balance-type calorimeter for measuring power electronics and motors.
Proceedings of the IECON 2013, 2013

Sensorless positioning of a non-salient permanent magnet linear motor by combining open-loop current angle rotation method and back-EMF estimator.
Proceedings of the IECON 2013, 2013

Frequency converter driven induction motor losses.
Proceedings of the IECON 2013, 2013

2012
Measurements and Simulations of DTC Voltage Source Converter and Induction Motor Losses.
IEEE Trans. Ind. Electron., 2012

2004
Limitation of the load angle in a direct-torque-controlled synchronous machine drive.
IEEE Trans. Ind. Electron., 2004

2003
Estimation of the flux linkage in a direct-torque-controlled drive.
IEEE Trans. Ind. Electron., 2003


  Loading...