Juan A. Tapia

According to our database, Juan A. Tapia authored at least 17 papers between 2008 and 2025.

Collaborative distances:

• Dijkstra number of five.
• Erdős number of five.

2025

Comparison of Optimized Electrically Excited Wound-Field and Permanent Magnet Synchronous Motors for Light EV Applications.

Melisa Recabarren, Carlos Madariaga-Cifuentes, Cesar Gallardo, Federica Graffeo, Matías Jimenez, Gustavo Perez-Guirriman, Juan A. Tapia

Proceedings of the 51st Annual Conference of the IEEE Industrial Electronics Society, 2025

Hairpin Windings in Double-Cage EV Motors: Impact on Torque and Efficiency under Variable Frequency Operation.

Felipe Santacruz Benavides, Carlos Gálvez-Araya, Carlos Madariaga-Cifuentes, Juan A. Tapia

Proceedings of the 51st Annual Conference of the IEEE Industrial Electronics Society, 2025

2023

Calculation of a Current Vector Trajectory for Enhanced Operation of Synchronous Reluctance Generators Including Saturation.

Alvaro E. Hoffer, Roberto H. Moncada, Boris J. Pavez-Lazo, Juan A. Tapia, Lasse I. E. Laurila

IEEE Trans. Ind. Electron., 2023

Fast Assessment of Rotor Barrier Dimensional Allowances in Synchronous Reluctance Machines.

Carlos Madariaga, Cesar Gallardo, Juan A. Tapia, Werner Jara, Andrés Escobar, Michele Degano

IEEE Access, 2023

2021

Stainless-Core Submersible Permanent Magnet Synchronous Machine.

Alvaro E. Hoffer, Ilya Petrov, Juha J. Pyrhönen, Juan A. Tapia

IEEE Access, 2021

2020

Analysis of a Tooth-Coil Winding Permanent-Magnet Synchronous Machine With an Unequal Teeth Width.

Alvaro E. Hoffer, Ilya Petrov, Juha J. Pyrhönen, Juan A. Tapia, Gerd Bramerdorfer

IEEE Access, 2020

2019

Design of a Stainless Core Submersible Permanent Magnet Generator for Tidal Energy.

Alvaro E. Hoffer, Juan A. Tapia, Ilya Petrov, Juha Pyrhönen

Proceedings of the IECON 2019, 2019

2018

Optimization of Electric Machine Designs - Part II.

Andrea Cavagnino, Gerd Bramerdorfer, Juan A. Tapia

IEEE Trans. Ind. Electron., 2018

Modern Electrical Machine Design Optimization: Techniques, Trends, and Best Practices.

Gerd Bramerdorfer, Juan A. Tapia, Juha J. Pyrhönen, Andrea Cavagnino

IEEE Trans. Ind. Electron., 2018

2017

Optimization of Electric Machine Designs-Part I.

Andrea Cavagnino, Gerd Bramerdorfer, Juan A. Tapia

IEEE Trans. Ind. Electron., 2017

2016

Rotor Eddy-Current Losses Reduction in an Axial Flux Permanent-Magnet Machine.

Werner Jara, Pia Lindh, Juan Antonio Tapia, Ilya Petrov, Anna-Kaisa Repo, Juha J. Pyrhönen

IEEE Trans. Ind. Electron., 2016

2015

Hybrid Cooling Method of Axial-Flux Permanent-Magnet Machines for Vehicle Applications.

Maria Polikarpova, Pavel Ponomarev, Pia Lindh, Ilya Petrov, Werner Jara, V. Naumanen, Juan A. Tapia, Juha J. Pyrhönen

IEEE Trans. Ind. Electron., 2015

2014

Design of a Traction Motor With Tooth-Coil Windings and Embedded Magnets.

Pia Lindh, Juho Montonen, Paula Immonen, Juan A. Tapia, Juha J. Pyrhönen

IEEE Trans. Ind. Electron., 2014

Feasibility of an Armature-Reaction-Compensated Permanent-Magnet Synchronous Generator in Island Operation.

Katteden Kamiev, Janne Nerg, Juha J. Pyrhönen, Valeriy Zaboin, Juan A. Tapia

IEEE Trans. Ind. Electron., 2014

2013

Design Principles of Permanent Magnet Synchronous Machines for Parallel Hybrid or Traction Applications.

Katteden Kamiev, Juho Montonen, Mahendarkar Prabhakaran Ragavendra, Juha J. Pyrhönen, Juan A. Tapia, Markku Niemela

IEEE Trans. Ind. Electron., 2013

2010

Analysis of Negative-Saliency Permanent-Magnet Machines.

Roberto H. Moncada, Juan A. Tapia, Thomas M. Jahns

IEEE Trans. Ind. Electron., 2010

2008

Heat Transfer and Thermal Design of Finned Frames for TEFC Variable-Speed Motors.

M. Anibal Valenzuela, Juan A. Tapia

IEEE Trans. Ind. Electron., 2008