Ming Zhang
Orcid: 0000-0002-3820-5074Affiliations:
- Tsinghua University, Department of Precision Instruments and Mechanology, Beijing, China
According to our database1,
Ming Zhang
authored at least 29 papers
between 2010 and 2022.
Collaborative distances:
Collaborative distances:
Timeline
Legend:
Book In proceedings Article PhD thesis Dataset OtherLinks
Online presence:
-
on publons.com
-
on orcid.org
On csauthors.net:
Bibliography
2022
A Signal Processing Method for Homodyne Laser Interferometer Based on Model Parameter Self-Calibration With Redundant Information.
IEEE Trans. Instrum. Meas., 2022
Grating Interferometer with Redundant Design for Performing Wide-Range Displacement Measurements.
Sensors, 2022
Proceedings of the 18th IEEE/ASME International Conference on Mechatronic and Embedded Systems and Applications, 2022
2021
Intelligent Feedforward Compensation Motion Control of Maglev Planar Motor With Precise Reference Modification Prediction.
IEEE Trans. Ind. Electron., 2021
Feedforward Tuning by Fitting Iterative Learning Control Signal for Precision Motion Systems.
IEEE Trans. Ind. Electron., 2021
Enhancing Settling Performance of Precision Motion Systems by Phase-Based Variable Gain Feedback Control.
IEEE Trans. Ind. Electron., 2021
Quantitative Tracking Error Analysis and Feedforward Compensation Under Different Model-Based Feedforward Controllers in Different Control Architectures.
IEEE Trans. Ind. Electron., 2021
Soft Sensor Model for Estimating the POI Displacement Based on a Dynamic Neural Network.
J. Adv. Comput. Intell. Intell. Informatics, 2021
Model Prediction based Online Feedforward Compensation Control of Maglev Planar Motor with Comparative Investigation.
Proceedings of the IEEE International Conference on Mechatronics, 2021
2020
IEEE Trans. Ind. Electron., 2020
Analysis of the Errors Caused by Disturbed Multimode Fibers in the Interferometer with Fiber-Coupled Delivery.
Sensors, 2020
2019
The Generation Mechanism of Tracking Error During Acceleration or Deceleration Phase in Ultraprecision Motion Systems.
IEEE Trans. Ind. Electron., 2019
Ultraprecision Real-Time Displacements Calculation Algorithm for the Grating Interferometer System.
Sensors, 2019
Two Degree-of-Freedom Fiber-Coupled Heterodyne Grating Interferometer with Milli-Radian Operating Range of Rotation.
Sensors, 2019
Quantitative Analysis on Tracking Error Under Different Control Architectures and Feedforward Methods.
Proceedings of the 2019 American Control Conference, 2019
2018
Newton-ILC Contouring Error Estimation and Coordinated Motion Control for Precision Multiaxis Systems With Comparative Experiments.
IEEE Trans. Ind. Electron., 2018
Yaw error correction of ultra-precision stage for scanning beam interference lithography systems.
J. Syst. Control. Eng., 2018
Generalized GTCF Coordination Mechanism Based LARC Contouring Control of Industrial Motion Stages for Complex Contours.
IEEE Access, 2018
2017
An Improved Displacement Measurement Based on Model Reconstruction for Permanent Magnet Synchronous Motor.
IEEE Trans. Instrum. Meas., 2017
Neural Network Learning Adaptive Robust Control of an Industrial Linear Motor-Driven Stage With Disturbance Rejection Ability.
IEEE Trans. Ind. Informatics, 2017
2016
Performance-Oriented Precision LARC Tracking Motion Control of a Magnetically Levitated Planar Motor With Comparative Experiments.
IEEE Trans. Ind. Electron., 2016
2015
Proceedings of the IEEE International Conference on Information and Automation, 2015
2014
Structure design and trajectory planning of a precision repetitive-scanning stage with separated drive units for heat-reduction.
Proceedings of the IEEE/ASME International Conference on Advanced Intelligent Mechatronics, 2014
2013
A Holistic Self-Calibration Approach for Determination of Three-Dimensional Stage Error.
IEEE Trans. Instrum. Meas., 2013
Proceedings of the 2013 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, 2013
Proceedings of the 2013 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, 2013
2012
IEEE Trans. Instrum. Meas., 2012
2010