Philippe Renaud

According to our database1, Philippe Renaud authored at least 24 papers between 1994 and 2015.

Collaborative distances:
  • Dijkstra number2 of four.
  • Erdős number3 of four.



In proceedings 
PhD thesis 




A Simple and Reliable PDMS and SU-8 Irreversible Bonding Method and Its Application on a Microfluidic-MEA Device for Neuroscience Research.
Micromachines, 2015

Special Issue: 15 Years of SU8 as MEMS Material.
Micromachines, 2015

Enclosed Electronic System for Force Measurements in Knee Implants.
Sensors, 2014

SU-8 as a Material for Microfabricated Particle Physics Detectors.
Micromachines, 2014

Biomimetic <i>Pieris rapae</i>'s Nanostructure and Its Use as a Simple Sucrose Sensor.
Micromachines, 2014

Implantable and wearable measurement system for smart knee prosthesis.
Proceedings of the IEEE Biomedical Circuits and Systems Conference, 2014

Instrumented Knee Prosthesis for Force and Kinematics Measurements.
IEEE Trans Autom. Sci. Eng., 2013

Application of micro-channel cooling to the local thermal management of detectors electronics for particle physics.
Microelectron. J., 2013

Al2O3/W hetero-structured nanopore membranes: From native to tunable nanofluidic diodes.
Proceedings of the 8th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2013

Remotely powered implantable heart monitoring system for freely moving animals.
Proceedings of the 5th IEEE International Workshop on Advances in Sensors and Interfaces, 2013

Very High Throughput Electrical Cell Lysis and Extraction of Intracellular Compounds Using 3D Carbon Electrodes in Lab-on-a-Chip Devices.
Micromachines, 2012

High-Throughput Micro-Debubblers for Bubble Removal with Sub-Microliter Dead Volume.
Micromachines, 2012

An Analog Front-End and ADC Integrated Circuit for Implantable Force and Orientation Measurements in Joint Prosthesis.
Proceedings of the Wireless Mobile Communication and Healthcare, 2012

Instrumented prosthesis for knee implants monitoring.
Proceedings of the IEEE Conference on Automation Science and Engineering, 2011

<i>In Vivo</i> Electrical Impedance Spectroscopy of Tissue Reaction to Microelectrode Arrays.
IEEE Trans. Biomed. Eng., 2009

Cell Culture Imaging Using Microimpedance Tomography.
IEEE Trans. Biomed. Eng., 2008

A Telemetric Pressure Sensor System for Biomedical Applications.
IEEE Trans. Biomed. Eng., 2008

Retinal prosthesis : Testing prototypes on a dystrophic rat retina.
Proceedings of the 18th European Conference on Circuit Theory and Design, 2007

Large area recrystallization of thick polysilicon films for low cost partial SOI power devices.
Microelectron. J., 2006

Modeling and Design of a Low-Voltage SOI Suspended-Gate MOSFET (SG-MOSFET) with a Metal-over-Gate Architecture.
Proceedings of the 3rd International Symposium on Quality of Electronic Design, 2002

Microstereolithography: concepts and applications.
Proceedings of 8th IEEE International Conference on Emerging Technologies and Factory Automation, 2001

Modeling and simulation of electromechanical transducers in microsystems using an analog hardware description language.
Proceedings of the European Design and Test Conference, 1997

A 4-degrees-of-freedom microrobot with nanometer resolution.
Robotica, 1996

Quantitative design of a scalable microsystem using ALMA: the example of the dictionary machine.
Proceedings of IEEE 5th International Workshop on Rapid System Prototyping, 1994