Ryutaro Tanaka

According to our database, Ryutaro Tanaka authored at least 14 papers between 2009 and 2026.

Collaborative distances:

• Dijkstra number of five.
• Erdős number of four.

2026

Evaluation of Friction Characteristics Between Tool and Workpiece Using Cutting Resistance During Feed Deceleration in Interrupted Cutting - Analysis of the Definition of Calculated Friction Characteristic Values -.

Isaí Espinoza-Torres, Ryutaro Tanaka, Israel Martínez-Ramírez, Katsuhiko Sekiya, Keiji Yamada

Int. J. Autom. Technol., January, 2026

Designing Play from Everyday Objects: Shape-Based Playfication for Anticipating Children's Play.

Ryutaro Tanaka, Yuya Kawabe, Shihomi Kuribayashi, Yuki Hashimoto, Yoshifumi Nishida

Proceedings of the 25th Annual ACM Interaction Design and Children Conference, 2026

2024

Prediction of Surface Roughness Components in Turning with Single Point Tool - Measurement of Tool Edge Contour and Prediction of its Position During Cutting -.

Ryo Sakamoto, Ryutaro Tanaka, Isaí Espinoza-Torres, Israel Martínez-Ramírez, Katsuhiko Sekiya, Keiji Yamada

Int. J. Autom. Technol., May, 2024

2023

Biofuel Cell Fueled by Decomposing Cellulose Nanofiber to Glucose by Using Cellulase Enzyme.

Ryutaro Tanaka, Satomitsu Imai

IEICE Trans. Electron., June, 2023

2022

Effect of Cutting Fluid on Tool Wear in Finished Surface Formation Area of Rounded Nosed Tool When Turning Alloy 304.

Takahide Hayashida, Ryutaro Tanaka, Katsuhiko Sekiya, Keiji Yamada

Int. J. Autom. Technol., 2022

2021

Biofuel Cell Using Cellulose Nanofiber as Fuel Supply.

Ryutaro Tanaka, Mitsuhiro Ogawa, Satomitsu Imai

IEICE Trans. Electron., 2021

2020

Hilbert-Huang Transform Analysis of Machining Stability in Ball-Nose End-Milling of Curved Surface.

Muizuddin Azka, Keiji Yamada, Mahfudz Al Huda, Kyosuke Mani, Ryutaro Tanaka, Katsuhiko Sekiya

Int. J. Autom. Technol., 2020

2018

Milling Process Monitoring Based on Vibration Analysis Using Hilbert-Huang Transform.

Agus Susanto, Chia-Hung Liu, Keiji Yamada, Yean-Ren Hwang, Ryutaro Tanaka, Katsuhiko Sekiya

Int. J. Autom. Technol., 2018

2016

Drilling of CFRP with an Electrodeposited Diamond Core Drill - Effects of Air Assistance and Tool Shape -.

Yuto Kojima, Ryutaro Tanaka, Yasuo Yamane, Katsuhiko Sekiya, Keiji Yamada

Int. J. Autom. Technol., 2016

2013

A Basic Study on the Relations Between Machining Conditions and the Static and Dynamic Components of Forces in Drilling.

Jie Xu, Keiji Yamada, Katsuhiko Seikiya, Ryutaro Tanaka, Yasuo Yamane

Int. J. Autom. Technol., 2013

Effects of Tool Edge Geometry on Cutting Temperature in Continuous Cutting of Case Hardened Steel.

Ryutaro Tanaka, Akira Hosokawa, Tatsuaki Furumoto, Takashi Ueda

Int. J. Autom. Technol., 2013

Medaka Observation Based on Rotation Invariant Features.

Ryutaro Tanaka, Yasutake Okuda, Satoru Takahashi, Shoji Oda, Shun'ichi Kaneko

Proceedings of the First International Symposium on Computing and Networking, 2013

2010

Machined Workpiece Edge Shape Control by Laser Hardening - Optimizing Laser Scan Conditions and Cutter Paths -.

Ryutaro Tanaka, Takashi Kito, Akira Hosokawa, Takashi Ueda, Tatsuaki Furumoto

Int. J. Autom. Technol., 2010

2009

Dental Treatment with Laser Beam -Monitoring Enabling Safe Hard-Tooth-Tissue Removal-.

Keiji Yamada, Takashi Ueda, Akira Hosokawa, Tatsuaki Furumoto, Ryutaro Tanaka

Int. J. Autom. Technol., 2009