Sirkka-Liisa Jämsä Jounela

  • Aalto University, Espoo, Finland

According to our database1, Sirkka-Liisa Jämsä Jounela authored at least 26 papers between 1999 and 2019.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of four.



In proceedings 
PhD thesis 


Online presence:



Fault Propagation Analysis by Implementing Nearest Neighbors Method Using Process Connectivity.
IEEE Trans. Control. Syst. Technol., 2019

Optimal planning of municipal solid waste management systems in an integrated supply chain network.
Comput. Chem. Eng., 2019

Process Monitoring Platform based on Industry 4.0 tools: a waste-to-energy plant case study.
Proceedings of the 4th Conference on Control and Fault Tolerant Systems, 2019

Control strategy of a Multiple Hearth Furnace enhanced by machine learning algorithms.
Proceedings of the 4th Conference on Control and Fault Tolerant Systems, 2019

Simplified Mechanistic Model of the Multiple Hearth Furnace for Control Development.
Simul. Notes Eur., 2018

Data and Reliability Characterization Strategy for Automatic Detection of Valve Stiction in Control Loops.
IEEE Trans. Control. Syst. Technol., 2017

Improvement of load-following capacity of grate boilers based on the combustion power soft-sensor.
Proceedings of the 21st IEEE International Conference on Emerging Technologies and Factory Automation, 2016

Fault-tolerant model predictive control (FTMPC) for the BioGrate boiler.
Proceedings of the 20th IEEE Conference on Emerging Technologies & Factory Automation, 2015

A performance optimization algorithm for controller reconfiguration in fault tolerant distributed model predictive control.
Proceedings of the IEEE International Conference on Automation Science and Engineering, 2015

Fault propagation analysis of oscillations in control loops using data-driven causality and plant connectivity.
Comput. Chem. Eng., 2014

Fault propagation analysis by combining data-driven causal analysis and plant connectivity.
Proceedings of the 2014 IEEE Emerging Technology and Factory Automation, 2014

A dynamic prognosis algorithm in distributed fault tolerant model predictive control.
Proceedings of the 2014 IEEE Conference on Control Applications, 2014

Data characterization for automatic selection of valve stiction detection algorithms.
Proceedings of the 52nd IEEE Conference on Decision and Control, 2013

Monitoring of caliper sensor fouling in a board machine using self-organising maps.
Expert Syst. Appl., 2012

Outline of a fault diagnosis system for a large-scale board machine.
Proceedings of the IEEE International Conference on Control Applications, 2012

Application of the Enhanced Dynamic Causal Digraph Method on a Three-Layer Board Machine.
IEEE Trans. Control. Syst. Technol., 2011

Iterative optimization of the economic efficiency of an industrial process within the validity area of the static plant model and its application to a Pulp Mill.
Comput. Chem. Eng., 2011

Automation and Robotics in Mining and Mineral Processing.
Proceedings of the Springer Handbook of Automation, 2009

Application of the enhanced dynamic causal digraph method on a three-layer board machine.
Proceedings of the 10th European Control Conference, 2009

An embedded fault detection, isolation and accommodation system in a model predictive controller for an industrial benchmark process.
Comput. Chem. Eng., 2008

Future trends in process automation.
Annu. Rev. Control., 2007

Use of upper bound delay estimate in stability analysis and robust control compensation in networked control systems
CoRR, 2006

Control compensation based on upper bound delay in networked control systems
CoRR, 2006

An online application of dynamic PLS to a dearomatization process.
Comput. Chem. Eng., 2004

Industrial applications of the intelligent fault diagnosis system.
Proceedings of the American Control Conference, 2001

Modern fault diagnosis system for the variable volume pressure filter.
Proceedings of the 5th European Control Conference, 1999