Ahmed Masmoudi

Affiliations:
  • University of Sfax, Tunisia


According to our database1, Ahmed Masmoudi authored at least 42 papers between 1998 and 2023.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of five.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

On csauthors.net:

Bibliography

2023
Compound Analytical Model Dedicated to the Prediction of the Features of Fractional-Slot PMSMs.
IEEE Access, 2023

2022
Investigation of the Effects of the Pole Shoe Geometry on the IPM T-LSM Features: Application to Free Piston Engines.
IEEE Access, 2022

3D Rotor Position-Dependant MEC Modeling of Different Claw Pole Machine Topologies.
IEEE Access, 2022

Fractional-Slot PMSMs With One Coil Parallel Branches Made Phases - Part 2: Circulating Harmonic Current Rejection Potential.
IEEE Access, 2022

Feature Investigation of a Segmented Pole Quasi- Halbach Tubular-Linear Synchronous Machine.
IEEE Access, 2022

2021
Fractional-Slot PMSMs With One Coil Parallel Branches Made Phases - Part I: Investigation Study.
IEEE Access, 2021

An Approach to Reduce the Detent Force of Double-Sided Flat Linear PMSMs.
Proceedings of the 16th International Conference on Ecological Vehicles and Renewable Energies, 2021

On the Enhancement of the Thrust Production of LPMSMs: Application to Ropeless Elevators.
Proceedings of the 16th International Conference on Ecological Vehicles and Renewable Energies, 2021

Multiphysics Modelling and Real Time Simulation of a Permanent-Magnet Machine for Electric Vehicles.
Proceedings of the 16th International Conference on Ecological Vehicles and Renewable Energies, 2021

2020
Feature Investigation of a Segmented Poles Quasi- Halbach T-LSM: Application to Free Piston Engines.
Dataset, May, 2020

Feature Investigation of a Segmented PM Quasi- Halbach Tubular-Linear Synchronous Machine.
Dataset, April, 2020

Fault-Tolerant Fractional-Slot PMSMs with One Coil Parallel Branches Made Phases. Part 1: Identification and Topological Characterization.
Dataset, April, 2020

Fault-Tolerant Fractional-Slot PMSMs with One Coil Parallel Branches Made Phases. Part 2: Circulating Harmonic Current Rejection Potential.
Dataset, April, 2020

Fault-Tolerant Fractional-Slot PMSMs with One Coil Parallel Branches Made Phases - Part 2: Circulating Harmonic Current Rejection Potential.
Dataset, April, 2020

Fault-Tolerant Fractional-Slot PMSMs with One Coil Parallel Branches Made Phases - Part 1: Identification and Topological Characterization.
Dataset, April, 2020

Fallout of the Mover Eccentricity on the PM Eddy Current Loss of Quasi-Halbach T-LSMs.
Dataset, March, 2020

An Approach to Predict IPM T-LSMs Air Gap Flux Density: Application to the Mover Geometry Sizing.
Dataset, March, 2020

Feature Investigation of a Segmented PM Quasi- Halbach Tubular-Linear Synchronous Machine.
Dataset, January, 2020

Rotating High Frequency Injection and Ellipse Fitting Technique for Ringed-Pole Motor Sensorless Control.
Proceedings of the Fifteenth International Conference on Ecological Vehicles and Renewable Energies, 2020

2019
Feature Investigation of a Segmented PM Quasi- Halbach T-LSM: Cost-Performance Trade-off.
Dataset, October, 2019

Fractional-Slot PMSMs with One Coil Parallel Branches Made Phases: Topological Characterization and Circulating Harmonic Currents Rejection.
Dataset, September, 2019

Comparison of the No-Load Features of IPM and Consequent Pole Tubular-Linear PM Synchronous Machines.
Proceedings of the Fourteenth International Conference on Ecological Vehicles and Renewable Energies, 2019

Hybrid Excited Claw-Pole Machines: Comparison between Different Topologies.
Proceedings of the 16th International Multi-Conference on Systems, Signals & Devices, 2019

2018
Pole Shape-Based Reduction of the Harmonic Content of the IPM T-LSM Air Gap Flux Density.
IEEE Trans. Ind. Electron., 2018

Bus-Clamping-Based Direct Torque Control Strategy Dedicated to B6-Inverter Fed Symmetrical Two-Phase IM Drive.
IEEE Trans. Ind. Electron., 2018

Analytical model-based optimization of the force production capability of IPM T-LSMs: Application to wave energy conversion systems.
Proceedings of the Thirteenth International Conference on Ecological Vehicles and Renewable Energies, 2018

3D-FEA based-comparison of different topologies of claw-pole alternators with a dual excitation.
Proceedings of the Thirteenth International Conference on Ecological Vehicles and Renewable Energies, 2018

Characterization on the no- and on-load operations of an improved claw pole machine.
Proceedings of the Thirteenth International Conference on Ecological Vehicles and Renewable Energies, 2018

FEA-assisted steady-state modelling of a spoke type IPM machine with enhanced flux weakening capability.
Proceedings of the Thirteenth International Conference on Ecological Vehicles and Renewable Energies, 2018

MEC-based prediction of the air gap flux density distribution of spoke-type IPM machines.
Proceedings of the Thirteenth International Conference on Ecological Vehicles and Renewable Energies, 2018

Automotive propulsion drive emulation using two cascaded inverters.
Proceedings of the Thirteenth International Conference on Ecological Vehicles and Renewable Energies, 2018

A simple assessment of the dynamics of the road vehicles.
Proceedings of the Thirteenth International Conference on Ecological Vehicles and Renewable Energies, 2018

On the enhancement of the starting capabilities of single phase line-start PMSMs.
Proceedings of the Thirteenth International Conference on Ecological Vehicles and Renewable Energies, 2018

B6-VSI emulation-based DTC strategy dedicated to B3-VSI fed induction motor drives.
Proceedings of the Thirteenth International Conference on Ecological Vehicles and Renewable Energies, 2018

Electromagnetic-thermal coupling applied to the analysis of the heat transfer in a traction motor.
Proceedings of the Thirteenth International Conference on Ecological Vehicles and Renewable Energies, 2018

Carrier-Based and Space Vector PWM Techniques for Delta Inverter Fed IM Drive Operating in Linear and Overmodulation Ranges.
Proceedings of the 15th International Multi-Conference on Systems, Signals & Devices, 2018

RFOC and DTC Strategies for Reduced Structure B3-Inverter Fed Induction Motor Drives.
Proceedings of the 15th International Multi-Conference on Systems, Signals & Devices, 2018

2013
Bus-Clamping-Based DTC: An Attempt to Reduce Harmonic Distortion and Switching Losses.
IEEE Trans. Ind. Electron., 2013

Star of slots-based graphical assessment of the back-EMF of fractional-slot PM synchronous machines.
Proceedings of the 10th International Multi-Conferences on Systems, Signals & Devices, 2013

2005
Extending the analog input capabilities of the DS1102 DSP controller board.
Comput. Electr. Eng., 2005

2002
On the dynamic and steady state performances of a vector controlled DFM drive.
Proceedings of the IEEE International Conference on Systems, Man and Cybernetics: Bridging the Digital Divide, Yasmine Hammamet, Tunisia, October 6-9, 2002, 2002

1998
Reduced order model based neural network control of a squirrel cage induction motor drive.
Int. J. Syst. Sci., 1998


  Loading...