Consolatina Liguori

According to our database1, Consolatina Liguori authored at least 89 papers between 1998 and 2023.

Collaborative distances:
  • Dijkstra number2 of four.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

On csauthors.net:

Bibliography

2023
Smart Water Meter Based on Deep Neural Network and Undersampling for PWNC Detection.
IEEE Trans. Instrum. Meas., 2023

A Survey on Uncertainty Assessment in ANN-Based Measurements.
Proceedings of the IEEE International Conference on Metrology for eXtended Reality, 2023

Frequency analysis for the measurement of environmental noise.
Proceedings of the IEEE International Workshop on Metrology for Automotive, 2023

The Evaluation of Uncertainty in Measurements Using Artificial Neural Network Techniques.
Proceedings of the 49th Annual Conference of the IEEE Industrial Electronics Society, 2023

An innovative method for log diameter measurements based on deep learning.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2023

2022

Image Scaling Effects on Deep Learning Based Applications.
Proceedings of the IEEE International Symposium on Measurements & Networking, 2022

Acoustic Monitoring of Environmental Noise Based on Sampling Approach.
Proceedings of the IEEE International Symposium on Measurements & Networking, 2022

Parameter estimation for fault detection and classification in centrifugal pumps.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2022

A novel image processing technique based on deep learning for water consumption detection.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2022

Development of a new speed measurement technique based on deep learning.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2022

2021
Image Processing Technique for Improving the Sensitivity of Mechanical Register Water Meters to Very Small Leaks.
Sensors, 2021

Functionalized Nanoparticles for Characterization Through TEM Images: Comparison Between Two Innovative Techniques.
IEEE Instrum. Meas. Mag., 2021

Distributed Smart Measurement Architecture for Industrial Automation.
CoRR, 2021

Separate Sound into STFT Frames to Eliminate Sound Noise Frames in Sound Classification.
Proceedings of the IEEE Symposium Series on Computational Intelligence, 2021

Computational imaging for drill bit wear estimation.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2021

A CNN-based approach to measure wood quality in timber bundle images.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2021

Characterization of 3D Image-Based Biometric Systems in Dynamic Acquisition Conditions.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2021

2020
Accurate Measurement of Reciprocating Kinetic Friction Coefficient Through Automatic Detection of the Running-In.
IEEE Trans. Instrum. Meas., 2020

Quality Assessment of the Inshell Hazelnuts Based on TD-NMR Analysis.
IEEE Trans. Instrum. Meas., 2020

SAR sensors measurements for environmental classification: Machine learning-based performances.
IEEE Instrum. Meas. Mag., 2020

Indoor Silent Object Localization using Ambient Acoustic Noise Fingerprinting.
Proceedings of the 2020 IEEE International Instrumentation and Measurement Technology Conference, 2020

A novel IVS procedure for handling Big Data with Artificial Neural Networks.
Proceedings of the 2020 IEEE International Instrumentation and Measurement Technology Conference, 2020

Image based similarity detection in mechanical registers.
Proceedings of the 2020 IEEE International Instrumentation and Measurement Technology Conference, 2020

Two-stage Artificial Intelligence Clinical Decision Support System for Cardiovascular Assessment using Convolutional Neural Networks and Decision Trees.
Proceedings of the 13th International Joint Conference on Biomedical Engineering Systems and Technologies (BIOSTEC 2020), 2020

2019
A Statistical Approach for Improving the Accuracy of Dry Friction Coefficient Measurement.
IEEE Trans. Instrum. Meas., 2019

Enhanced Methods for Extracting Characteristic Features from ECG.
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2019

Bridge dynamic analysis for accurate control and monitoring: Feasibility study.
Proceedings of the IECON 2019, 2019

Accurate measurement of Kinetic Friction Coefficient by using two types of tribometer.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2019

Data Fusion for Timber Bundle Volume Measurement.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2019

Smart meters and water leakage detection: a preliminary study.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2019

Smart Devices and Services for Smart City.
Proceedings of the 52nd Hawaii International Conference on System Sciences, 2019

2018
Accurate Estimation of the Environmental Noise Through Sampling Approach: Selection of the Measurement Time.
IEEE Trans. Instrum. Meas., 2018

Task-based measurements for estimating the workers' exposure to acoustic noise.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2018

Accurate measurement of dry friction coefficient using reciprocating tribometer.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2018

Advanced TD-NMR based estimation of the inshell hazelnuts quality parameters.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2018

Smart meter for the IoT.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2018

2017
Choosing Bootstrap Method for the Estimation of the Uncertainty of Traffic Noise Measurements.
IEEE Trans. Instrum. Meas., 2017

Hazelnut Oil Classification by NMR Techniques.
IEEE Trans. Instrum. Meas., 2017

Influence of measurement time on acoustic noise uncertainty.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017

Uncertainty of line camera image based measurements.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017

Using a SVD-based algorithm for T2 spectrum calculation in TD-NMR application to detect hidden defects in hazelnuts.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017

Sensitivity analysis of influence quantities on signal-to-noise ratio in face-based recognition systems.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017

I3DermoscopyApp: Hacking Melanoma thanks to IoT technologies.
Proceedings of the 50th Hawaii International Conference on System Sciences, 2017

2016
Outlier Detection for the Evaluation of the Measurement Uncertainty of Environmental Acoustic Noise.
IEEE Trans. Instrum. Meas., 2016

A preliminary study on the estimation of the uncertainty of traffic noise measurements.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2016

Investigation of the NMR techniques to detect hidden defects in hazelnuts.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2016

2015
A Proposal for the Management of the Measurement Uncertainty in Classification and Recognition Problems.
IEEE Trans. Instrum. Meas., 2015

A web-based application for dermoscopic measurements and learning.
Proceedings of the 2015 IEEE International Symposium on Medical Measurements and Applications, 2015

Towards the evaluation of the measurement uncertainty of environmental acoustic noise.
Proceedings of the 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2015

Smart meters and demand response: A double challenge.
Proceedings of the IEEE International Conference on Computational Intelligence and Virtual Environments for Measurement Systems and Applications, 2015

Towards visual smart metering exploiting wM-Bus and DLMS/COSEM.
Proceedings of the IEEE International Conference on Computational Intelligence and Virtual Environments for Measurement Systems and Applications, 2015

2014
On road testing of control strategies for semi-active suspensions.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2014

Online visual inspection of defects in the assembly of electromechanical parts.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2014

Managing the uncertainty for face classification with 3D features.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2014

2013
Real-Time Detection of Low-Frequency Components.
IEEE Trans. Instrum. Meas., 2013

Face Based Recognition Algorithms: A First Step Toward a Metrological Characterization.
IEEE Trans. Instrum. Meas., 2013

Characterization of motorcycle suspension systems: Comfort and handling performance evaluation.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

Illumination design in vision-based measurement systems.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

Face based recognition algorithms: The use of uncertainty in the classification.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

2012
An FPGA-Based Instrument for the Estimation of R, L, and C Parameters Under Nonsinusoidal Conditions.
IEEE Trans. Instrum. Meas., 2012

Mixed Graph of Terms: Beyond the Bags of Words Representation of a Text.
Proceedings of the 45th Hawaii International International Conference on Systems Science (HICSS-45 2012), 2012

2011
Covariance Propagation for the Uncertainty Estimation in Stereo Vision.
IEEE Trans. Instrum. Meas., 2011

Winemaking Process Monitoring Based on a Biosensor Automatic System.
IEEE Trans. Instrum. Meas., 2011

2010
Biosensor-Based Intelligent Measurement System for Wine Fermentation Monitoring.
Proceedings of the 43rd Hawaii International International Conference on Systems Science (HICSS-43 2010), 2010

2009
A New Calibration Procedure for 3-D Shape Measurement System Based on Phase-Shifting Projected Fringe Profilometry.
IEEE Trans. Instrum. Meas., 2009

Metrological Characterization of a Vision-Based Measurement System for the Online Inspection of Automotive Rubber Profile.
IEEE Trans. Instrum. Meas., 2009

2008
An improved procedure for the automatic detection of dermoscopic structures in digital ELM images of skin lesions.
Proceedings of the IEEE International Conference on Virtual Environments, 2008

2007
Improving and Qualifying Spectrum Analysis Made by Digital Scopes.
IEEE Trans. Instrum. Meas., 2007

IFFTC-Based Procedure for Hidden Tone Detection.
IEEE Trans. Instrum. Meas., 2007

Real-Time Implementation of IFDIA Scheme in Automotive Systems.
IEEE Trans. Instrum. Meas., 2007

Evaluation of the Uncertainty of Edge-Detector Algorithms.
IEEE Trans. Instrum. Meas., 2007

2006
Estimation of signal parameters in the frequency domain in the presence of harmonic interference: a comparative analysis.
IEEE Trans. Instrum. Meas., 2006

Software customization to provide digital oscilloscope with enhanced period-measurement features.
IEEE Trans. Instrum. Meas., 2006

A Comparison Between Stereo-Vision Techniques for the Reconstruction of 3-D Coordinates of Objects.
IEEE Trans. Instrum. Meas., 2006

2005
Evaluation of the uncertainty of geometrical features extracted from images: a proposal.
Proceedings of the IEEE International Conference on Virtual Environments, 2005

2004
An intelligent FFT analyzer with harmonic interference effect correction and uncertainty evaluation.
IEEE Trans. Instrum. Meas., 2004

Implementing uncertainty auto-evaluation capabilities on an intelligent FFT analyzer.
IEEE Trans. Instrum. Meas., 2004

Analytical redundancy for sensor fault isolation and accommodation in public transportation vehicles.
IEEE Trans. Instrum. Meas., 2004

Uncertainty evaluation in algorithms with conditional statement.
IEEE Trans. Instrum. Meas., 2004

2003
On-line sensor fault detection, isolation, and accommodation in automotive engines.
IEEE Trans. Instrum. Meas., 2003

2002
Measurements for the characterization of passive components in non-sinusoidal conditions.
IEEE Trans. Instrum. Meas., 2002

A DSP-based FFT-analyzer for the fault diagnosis of rotating machine based on vibration analysis.
IEEE Trans. Instrum. Meas., 2002

2001
An automatic measurement system for the evaluation of carotid intima-media thickness.
IEEE Trans. Instrum. Meas., 2001

A multi-application FFT analyzer based on a DSP architecture.
IEEE Trans. Instrum. Meas., 2001

2000
Uncertainty characterization in image-based measurements: a preliminary discussion.
IEEE Trans. Instrum. Meas., 2000

1998
Comparison between IFDI schemes based on expert systems and neural networks.
IEEE Trans. Instrum. Meas., 1998

An advanced neural-network-based instrument fault detection and isolation scheme.
IEEE Trans. Instrum. Meas., 1998

An intelligent FFT-analyzer.
IEEE Trans. Instrum. Meas., 1998


  Loading...