Vincenzo Paciello

According to our database1, Vincenzo Paciello authored at least 62 papers between 2005 and 2021.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Other 

Links

Online presence:

On csauthors.net:

Bibliography

2021
Measurement Optimization for Orientation Tracking Based on No Motion No Integration Technique.
IEEE Trans. Instrum. Meas., 2021

Body Temperature - Indoor Condition Monitor and Activity Recognition by MEMS Accelerometer Based on IoT-Alert System for People in Quarantine Due to COVID-19.
Sensors, 2021

2020
A distributed measurement system for the estimation of air quality.
IEEE Instrum. Meas. Mag., 2020

Earthquake Early Detection as an IEEE1451 Transducer Network Trigger for Urban Infrastructure Monitoring and Protection.
IEEE Instrum. Meas. Mag., 2020

A universal metadata model for metrological complex quantities.
Proceedings of the 2020 IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2020

Proposal for a power line communication network using gas pipelines as channel and nodes supply.
Proceedings of the 46th Annual Conference of the IEEE Industrial Electronics Society, 2020

Vibrations Measurement and Current Signatures for Fault Detection in Asynchronous Motor.
Proceedings of the 2020 IEEE International Instrumentation and Measurement Technology Conference, 2020

Edge Sensor Signal Processing Algorithms for Earthquake Early Detection.
Proceedings of the 2020 IEEE International Instrumentation and Measurement Technology Conference, 2020

Blockchain-Based Infrastructure to enable Trust in IoT environment.
Proceedings of the 2020 IEEE International Instrumentation and Measurement Technology Conference, 2020

Pre-Processing Technique for Compass-less Madgwick in Heading Estimation for Industry 4.0.
Proceedings of the 2020 IEEE International Instrumentation and Measurement Technology Conference, 2020

Unconventional communication channels for smart sensors networking.
Proceedings of the 2020 IEEE International Instrumentation and Measurement Technology Conference, 2020

2019
A wearable low-cost device for measurement of human exposure to transmitted vibration on motorcycle.
Proceedings of the 2nd Workshop on Metrology for Industry 4.0 and IoT MetroInd4.0&IoT 2019, 2019

A Smart Wireless Sensor Network For PM10 Measurement.
Proceedings of the 5th IEEE International Symposium on Measurements & Networking, 2019

Smart Sensor Efficient Signal Processing for Earthquake Early Detection.
Proceedings of the 5th IEEE International Symposium on Measurements & Networking, 2019

Self-alignment procedure for IMU in automotive context.
Proceedings of the 17th IEEE International Conference on Industrial Informatics, 2019

Bridge dynamic analysis for accurate control and monitoring: Feasibility study.
Proceedings of the IECON 2019, 2019

Proposal of a Sustainable e-Bike Sharing Infrastructure Based on the IEEE 1451 Standard.
Proceedings of the IECON 2019, 2019

IMU self-alignment in suspensions control system.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2019

Smart meters communication using Gas pipelines as channel: feasibility study.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2019

Smart Devices and Services for Smart City.
Proceedings of the 52nd Hawaii International Conference on System Sciences, 2019

2018
IEEE 21451-001 Signal Treatment Applied to Smart Transducers.
Proceedings of the Sensors, 2018

Time Synchronization Based on CMTS: A Performance Analysis in Industry Scenarios.
Proceedings of the 2018 Workshop on Metrology for Industry 4.0 and IoT, 2018

Measuring suspension velocity from acceleration integration.
Proceedings of the 16th IEEE International Conference on Industrial Informatics, 2018

Smart Power Meter for the IoT.
Proceedings of the 16th IEEE International Conference on Industrial Informatics, 2018

The Need for Standardisation in Low Power Smart Sensing.
Proceedings of the IECON 2018, 2018

Semi-active suspension system for motorcycles: From the idea to the industrial product.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2018

Smart meter for the IoT.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2018

2017
Impedance measurement in IEEE 21451 transducer interface modules.
Proceedings of the IEEE International Workshop on Measurement and Networking, 2017

Velocity prediction from acceleration measurements in motorcycle suspensions.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017

I3DermoscopyApp: Hacking Melanoma thanks to IoT technologies.
Proceedings of the 50th Hawaii International Conference on System Sciences, 2017

2016
Uncertainty of a real time segmentation and labeling algorithm in signal period measurement.
Proceedings of the 25th IEEE International Symposium on Industrial Electronics, 2016

Wireless indoor low power tracking system for elderly people assistance in an urban environment.
Proceedings of the 18th IEEE International Conference on e-Health Networking, 2016

2015
Algorithmic development for power quality monitoring by a network of wireless sensors.
Proceedings of the IEEE International Workshop on Measurements & Networking, 2015

Power quality in smart distribution grids.
Proceedings of the IEEE International Workshop on Measurements & Networking, 2015

Autonomous recharge of drones through an induction based power transfer system.
Proceedings of the IEEE International Workshop on Measurements & Networking, 2015

Real time transducer signal features extraction: A standard approach.
Proceedings of the 13th IEEE International Conference on Industrial Informatics, 2015

A battery equivalent-circuit model and an advanced technique for parameter estimation.
Proceedings of the 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2015

2014
Normalizing transducer signals: An overview of a proposed standard.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2014

On road testing of control strategies for semi-active suspensions.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2014

Testing protocols for battery characterization.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2014

Cooperative and self organizing paradigm for wide area synchronized monitoring of Smart Grids: Performance analysis in real operating scenarios.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2014

2013
Real-Time Detection of Low-Frequency Components.
IEEE Trans. Instrum. Meas., 2013

A decentralized and self organizing architecture for wide area synchronized monitoring of smart grids.
J. High Speed Networks, 2013

Smart sensing and smart material for smart automotive damping.
IEEE Instrum. Meas. Mag., 2013

Characterization of motorcycle suspension systems: Comfort and handling performance evaluation.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

Illumination design in vision-based measurement systems.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

On the performance of consensus protocols for decentralized smart grid metering in presence of measurement uncertainty.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

Power data fusion for train and railway electrification system.
Proceedings of the IEEE International Workshop on Applied Measurements for Power Systems, 2013

2012
Mixed Graph of Terms: Beyond the Bags of Words Representation of a Text.
Proceedings of the 45th Hawaii International International Conference on Systems Science (HICSS-45 2012), 2012

2011
Magnetorheological Dampers: A New Approach of Characterization.
IEEE Trans. Instrum. Meas., 2011

Experimental Characterization of Synchronization Protocols for Instrument Wireless Interface.
IEEE Trans. Instrum. Meas., 2011

Winemaking Process Monitoring Based on a Biosensor Automatic System.
IEEE Trans. Instrum. Meas., 2011

2010
Performance Characterization of a Wireless Instrumentation Bus.
IEEE Trans. Instrum. Meas., 2010

Biosensor-Based Intelligent Measurement System for Wine Fermentation Monitoring.
Proceedings of the 43rd Hawaii International International Conference on Systems Science (HICSS-43 2010), 2010

2008
Experimental characterization of synchronization protocols for wireless networks.
Proceedings of the IEEE International Conference on Virtual Environments, 2008

2007
Improving and Qualifying Spectrum Analysis Made by Digital Scopes.
IEEE Trans. Instrum. Meas., 2007

2006
Low-cost visual sensor node for BlueTooth-based measurement networks.
IEEE Trans. Instrum. Meas., 2006

Software customization to provide digital oscilloscope with enhanced period-measurement features.
IEEE Trans. Instrum. Meas., 2006

Designing low-cost modified cladding sensors: a structured approach.
IEEE Trans. Instrum. Meas., 2006

A Comparison Between Stereo-Vision Techniques for the Reconstruction of 3-D Coordinates of Objects.
IEEE Trans. Instrum. Meas., 2006

2005
A Bluetooth-based proposal of instrument wireless interface.
IEEE Trans. Instrum. Meas., 2005

Balancing computational and transmission power consumption in wireless image sensor networks.
Proceedings of the IEEE International Conference on Virtual Environments, 2005


  Loading...