Ada Fort

Orcid: 0000-0003-0916-1516

According to our database1, Ada Fort authored at least 167 papers between 1996 and 2024.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

Online presence:

On csauthors.net:

Bibliography

2024
A Smart Low-Cost QCM-D Based on Lightweight Frequency Domain Processing.
IEEE Trans. Instrum. Meas., 2024

2023
A Low Complexity Rolling Bearing Diagnosis Technique Based on Machine Learning and Smart Preprocessing.
Sensors, September, 2023

Characterization of the Response of Magnetron Sputtered In2O3-x Sensors to NO2.
Sensors, March, 2023

A Photoacoustic-Based Measurement System for Dual Detection of NO<sub>2</sub> and CO<sub>2</sub> in Combustion Exhaust Gases.
IEEE Trans. Instrum. Meas., 2023

Highly Sensitive Photoacoustic NO<sub>2</sub> Measurement System Based on an Optimized Ring-Shaped Resonant Cell.
IEEE Trans. Instrum. Meas., 2023

Enhanced Visible Light Localization Based on Machine Learning and Optimized Fingerprinting in Wireless Sensor Networks.
IEEE Trans. Instrum. Meas., 2023

A Distributed IoT Air Quality Measurement System for High-Risk Workplace Safety Enhancement.
Sensors, 2023

Bearing Failure Classification with Low Complexity Neural Network.
Proceedings of the IEEE International Conference on Metrology for eXtended Reality, 2023

WeAIR: Wearable Swarm Sensors for Air Quality Monitoring to Foster Citizens' Awareness of Climate Change.
Proceedings of the IEEE International Conference on Metrology for eXtended Reality, 2023

Machine Learning Regressor for Impedance Parameter Estimation of QCM Sensors for Liquid Media Characterization.
Proceedings of the IEEE International Conference on Metrology for eXtended Reality, 2023

A portable, low cost clot permeability measurement system.
Proceedings of the 2023 IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2023

Embedded Machine Learning for 3D Indoor Visible Light Positioning via Optimized Fingerprinting.
Proceedings of the 2023 IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2023

Multi-Phase Frequency Measurement Exploiting FPGA Mixed-Mode Clock Management for QCM-D Technology.
Proceedings of the IEEE International Symposium on Circuits and Systems, 2023

A MobileNet Neural Network Model for Fault Diagnosis in Roller Bearings.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2023

Performance of reinforced epoxy resin embedded MEMS accelerometers for IoT condition monitoring.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2023

An Advanced Customizable Circuit Simulator to Investigate Memristor Dynamics.
Proceedings of the Applications in Electronics Pervading Industry, Environment and Society, 2023

Investigation on NO2 sensing behavior of WO3 nanograined resistive sensors.
Proceedings of the 20th International Multi-Conference on Systems, Signals & Devices, 2023

2022
QCM Measurements in Newtonian Liquids: Problems and Performance Analysis.
IEEE Trans. Instrum. Meas., 2022

Smart Gravimetric System for Enhanced Security of Accesses to Public Places Embedding a MobileNet Neural Network Classifier.
IEEE Trans. Instrum. Meas., 2022

A Stochastic Algorithm to Design Min-Entropy Tuning Controllers for True Random Number Generators.
IEEE Trans. Circuits Syst. I Regul. Pap., 2022

Designing a Reliable and Low-Latency LoRaWAN Solution for Environmental Monitoring in Factories at Major Accident Risk.
Sensors, 2022

Performance Evaluation of an IoT Sensor Node for Health Monitoring of Artwork and Ancient Wooden Structures.
Sensors, 2022

Autonomous IoT Monitoring Matching Spectral Artificial Light Manipulation for Horticulture.
Sensors, 2022

Self-Sufficient Sensor Node Embedding 2D Visible Light Positioning through a Solar Cell Module.
Sensors, 2022

Strategies for the Accurate Measurement of the Resonance Frequency in QCM-D Systems via Low-Cost Digital Techniques.
Sensors, 2022

Telemetric QCM-D based sensing system with adaptive excitation frequency.
Proceedings of the IEEE Sensors Applications Symposium, 2022

Calibration of a multicomponent MEMS sensor for vibration monitoring of rolling bearings: broad-band and amplitude traceability up to 20 kHz.
Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2022

High Performance Analog MEMS for IoT Based Condition Monitoring, Characterization with a Bearing Failure Emulation Test Bench.
Proceedings of the IEEE International Workshop on Metrology for Automotive, 2022

Roller Bearing Failures Classification with Low Computational Cost Embedded Machine Learning.
Proceedings of the IEEE International Workshop on Metrology for Automotive, 2022

Monitoring of the Viscoelastic Behaviour of Bacterial Biofilms Exploiting an Accurate QCM System.
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2022

Hand-Arm Vibration Monitoring via Embedded Machine Learning on Low Power Wearable Devices.
Proceedings of the IEEE International Symposium on Measurements & Networking, 2022

A Low-Complexity Method to Address Process Variability in True Random Number Generators based on Digital Nonlinear Oscillators.
Proceedings of the IEEE International Symposium on Circuits and Systems, 2022

A Novel Front-End Circuit for the Digital Conversion of QCM-D Responses for FPGA-Based Frequency Measurements.
Proceedings of the Applications in Electronics Pervading Industry, Environment and Society, 2022

A High Accuracy QCM Based Sensing System for in Water Ammonia Monitoring.
Proceedings of the Sensors and Microsystems, 2022

2021
An AlN Micromachined Mass Sensor: Modeling and Characterization.
IEEE Trans. Instrum. Meas., 2021

A LoRaWAN Carbon Monoxide Measurement System With Low-Power Sensor Triggering for the Monitoring of Domestic and Industrial Boilers.
IEEE Trans. Instrum. Meas., 2021

Battery-Less HF RFID Sensor Tag for Soil Moisture Measurements.
IEEE Trans. Instrum. Meas., 2021

An Adaptive Measurement System for the Simultaneous Evaluation of Frequency Shift and Series Resistance of QCM in Liquid.
Sensors, 2021

Modeling the Conductivity Response to NO2 Gas of Films Based on MWCNT Networks.
Sensors, 2021

Ion Current Sensor for Gas Turbine Condition Dynamical Monitoring: Modeling and Characterization.
Sensors, 2021

Condition Monitoring with LoRaWAN: Preliminary Tests on Gas Turbine Exciters.
Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2021

NO2 photoacoustic sensing system based on resonant cell and UV-LED sensor.
Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2021

Quasi-Real Time Remote Video Surveillance Unit for LoRaWAN-based Image Transmission.
Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2021

Real Time Car Passengers Comfort Monitoring by means of Environmental and Vibrational Measurements.
Proceedings of the IEEE International Workshop on Metrology for Automotive, 2021

Distributed IoT system to enhance worker safety in large open areas.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2021

Data Transmission from ATEX Boxes by Means of LoRa Technology for Industrial Internet of Things (IIoT) Applications.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2021

LoRaWAN Transmission System Capability Assessment in Industrial Environment Under Temperature and Humidity Characterization.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2021

Impedance characterization of a QCM-based measurement system in liquid media.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2021

Long Range (LoRa) Transmission Through Ice: Preliminary Results.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2021

Smart gravimetric system based on Deep Learning for enhanced safety of accesses to public places.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2021

Low-Level Advanced Design of True Random Number Generators Based on Truly Chaotic Digital Nonlinear Oscillators in FPGAs.
Proceedings of the Applications in Electronics Pervading Industry, Environment and Society, 2021

2020
Performance Analysis of a Humidity Sensor Based on a Microresonator Functionalized With TiO<sub>2</sub> Nanoparticles.
IEEE Trans. Instrum. Meas., 2020

Ion Sensor-Based Measurement Systems: Application to Combustion Monitoring in Gas Turbines.
IEEE Trans. Instrum. Meas., 2020

A New Class of Digital Circuits for the Design of Entropy Sources in Programmable Logic.
IEEE Trans. Circuits Syst. I Regul. Pap., 2020

NO2 Sensing with SWCNT Decorated by Nanoparticles in Temperature Pulsed Mode: Modeling and Characterization.
Sensors, 2020

Highly Sensitive Detection of NO2 by Au and TiO2 Nanoparticles Decorated SWCNTs Sensors.
Sensors, 2020

Working Principle and Performance of a Scalable Gravimetric System for the Monitoring of Access to Public Places.
Sensors, 2020

Magnetic brakes material characterization under accelerated testing conditions.
Reliab. Eng. Syst. Saf., 2020

Interoperability among Sub-GHz Technologies for Metallic Assets Tracking and Monitoring.
Proceedings of the 2020 IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2020

An Automatic Battery Recharge and Condition Monitoring System for Autonomous Drones.
Proceedings of the 2020 IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2020

Low-cost, robust gravimetric system for enhanced security of accesses to public places.
Proceedings of the 2020 IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2020

A New Class of Chaotic Sources in Programmable Logic Devices.
Proceedings of the 2020 IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2020

A Characterization System for Bearing Condition Monitoring Sensors, a Case Study with a Low Power Wireless Triaxial MEMS Based Sensor.
Proceedings of the 2020 IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2020

Impedance Measurement Exploited for Anaphylaxis Prediction in Casein Allergic Children.
Proceedings of the 2020 IEEE International Symposium on Medical Measurements and Applications, 2020

Chaos in Fully Digital Circuits: A Novel Approach to the Design of Entropy Sources.
Proceedings of the IEEE International Symposium on Circuits and Systems, 2020

A measurement system for the evaluation of efficiency of enzyme accelerated CO2 capture systems based on modeling.
Proceedings of the 2020 IEEE International Instrumentation and Measurement Technology Conference, 2020

Battery-less HF RFID sensor tag for humidity measurements based on TiO2 nanoparticles.
Proceedings of the 2020 IEEE International Instrumentation and Measurement Technology Conference, 2020

Reliability and Availability Evaluation of Linear LoRaWAN Sensor Network Architectures for Pipeline Monitoring.
Proceedings of the 2020 IEEE International Instrumentation and Measurement Technology Conference, 2020

Design of Area-Efficient Physical Unclonable Functions Derived From CNNs: Trade-Offs and Optimization.
Proceedings of the European Conference on Circuit Theory and Design, 2020

2019
Instantaneous Rotation Speed Measurement System Based on Variable Reluctance Sensors for Torsional Vibration Monitoring.
IEEE Trans. Instrum. Meas., 2019

Measurement System Based on Electrostatic Sensors to Detect Moving Charged Debris With Planar-Isotropic Accuracy.
IEEE Trans. Instrum. Meas., 2019

On the Suitability of Low-Cost Compact Instrumentation for Blood Impedance Measurements.
IEEE Trans. Instrum. Meas., 2019

A Measurement System to Estimate the Pleural Pressure From the CVP for Respiratory System Monitoring.
IEEE Trans. Instrum. Meas., 2019

Co<sub>3</sub>O<sub>4</sub>/Al-ZnO Nano-composites: Gas Sensing Properties.
Sensors, 2019

Self-tunable chaotic true random bit generator in current-mode CMOS circuit with nonlinear distortion analysis.
Int. J. Circuit Theory Appl., 2019

Conditioning Circuit for Simultaneous Sensing and Actuation in Piezoelectric MEMS Resonators.
Proceedings of the IEEE Sensors Applications Symposium, 2019

Ion sensors: application to combustion monitoring in gas turbines.
Proceedings of the IEEE Sensors Applications Symposium, 2019

A LoRa-based IoT Sensor Node for Waste Management Based on a Customized Ultrasonic Transceiver.
Proceedings of the IEEE Sensors Applications Symposium, 2019

Smart Sensing in Mobility: a LoRaWAN Architecture for Pervasive Environmental Monitoring.
Proceedings of the 5th IEEE International forum on Research and Technology for Society and Industry, 2019

A wearable Low-cost Measurement System for Estimation of Human Exposure to Vibrations.
Proceedings of the 5th IEEE International forum on Research and Technology for Society and Industry, 2019

Analysis of a Circuit Primitive for the Reliable Design of Digital Nonlinear Oscillators.
Proceedings of the 15th Conference on Ph.D. Research in Microelectronics and Electronics, 2019

Black Powder Flow Monitoring in Pipelines by Means of Multi-Hop LoRa Networks.
Proceedings of the 2nd Workshop on Metrology for Industry 4.0 and IoT MetroInd4.0&IoT 2019, 2019

Performance Analysis of an AlN Humidity Sensor based on TiO2 nanoparticles.
Proceedings of the 5th IEEE International Symposium on Measurements & Networking, 2019

Smart Braking Material Wearout Monitoring for Part Life Assessment.
Proceedings of the International Symposium on Systems Engineering, 2019

A CMOS PUF Circuit Primitive Based on a Two-Dimensional Nonlinear Dynamical System.
Proceedings of the IEEE International Symposium on Circuits and Systems, 2019

Piecewise Linear Chaotic Maps in Current Mode CMOS Circuits: Nonlinear Distortion Analysis.
Proceedings of the IEEE International Symposium on Circuits and Systems, 2019

Lightweight True Random Bit Generators in PLDs: Figures of Merit and Performance Comparison.
Proceedings of the IEEE International Symposium on Circuits and Systems, 2019

Using the I2C bus to set up Long Range Wired Sensor and Actuator Networks in Smart Buildings.
Proceedings of the 2019 4th International Conference on Computing, 2019

2018
Quartz-Crystal Microbalance Gas Sensors Based on TiO<sub>2</sub> Nanoparticles.
IEEE Trans. Instrum. Meas., 2018

Gas Sensing Properties of In<sub>2</sub>O<sub>3</sub> Nano-Films Obtained by Low Temperature Pulsed Electron Deposition Technique on Alumina Substrates.
Sensors, 2018

YCoO3 Resistive Gas Sensors for the Detection of NO2 in 'Resistance Controlled Mode'.
Proceedings of the Sensors, 2018

Low Temperature NO2 Sensor Based on YCoO3 and TiO2 Nanoparticle Composites.
Proceedings of the Sensors, 2018

Instantaneous rotation speed measurement system based on variable reluctance sensors: Model and analysis of performance.
Proceedings of the 2018 IEEE Sensors Applications Symposium, 2018

An IoT Framework for the Pervasive Monitoring of Chemical Emissions in Industrial Plants.
Proceedings of the 2018 Workshop on Metrology for Industry 4.0 and IoT, 2018

A Novel Measurement System to Estimate the Trans-Pulmonary Pressure Exploiting the Central Venous Pressure and ECG Signals.
Proceedings of the 2018 IEEE International Symposium on Medical Measurements and Applications, 2018

A Compact System for Blood Impedance Measurements for ROS Evaluation.
Proceedings of the 2018 IEEE International Symposium on Medical Measurements and Applications, 2018

Turbomachinery Clearance Monitoring Based on Passive Variable Reluctance Magnetic Sensors.
Proceedings of the IEEE International Symposium on Circuits and Systems, 2018

Digital Nonlinear Oscillators in PLDs: Pitfalls and Open Perspectives for a Novel Class of True Random Number Generators.
Proceedings of the IEEE International Symposium on Circuits and Systems, 2018

2017
Detection of Allergen-IgE interaction in Allergic Children Through Combined Impedance and ROS Measurements.
IEEE Trans. Instrum. Meas., 2017

Optimization of Perovskite Gas Sensor Performance: Characterization, Measurement and Experimental Design.
Sensors, 2017

An Unconventional Type of Measurement with Chemoresistive Gas Sensors Exploiting a Versatile Measurement System.
Proceedings of the New Generation of CAS, 2017

Target measurements influence on level crossing detection system safety assessment.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017

Quartz crystal microbalance sensors based on TiO2 nanoparticles for gas sensing.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017

A lightweight digital system for the probabilistic characterization of true random bit generators.
Proceedings of the 2017 European Conference on Circuit Theory and Design, 2017

Multi-sensors Exhaust Gas Emission Monitoring System for Industrial Applications.
Proceedings of the Applications in Electronics Pervading Industry, Environment and Society, 2017

2016
A Smart Measurement System With Improved Low-Frequency Response to Detect Moving Charged Debris.
IEEE Trans. Instrum. Meas., 2016

Availability and reliability modeling of multicore controlled UPS for datacenter applications.
Reliab. Eng. Syst. Saf., 2016

Detection of allergen-IgE interaction in allergic children through impedance measurements.
Proceedings of the IEEE Sensors Applications Symposium, 2016

Stability evaluation of YCoO3 basedperovskites used for NO2 detection.
Proceedings of the IEEE Sensors Applications Symposium, 2016

Multisensor electrostatic detection of moving charged particles.
Proceedings of the IEEE Sensors Applications Symposium, 2016

Pervasive Wireless Sensor Networks for the Monitoring of Large Monumental Structures: The Case of the Ancient City Walls of Siena.
Proceedings of the Digital Heritage. Progress in Cultural Heritage: Documentation, Preservation, and Protection, 2016

2015
Assessment and Optimization for Novel Gas Materials Through the Evaluation of Mixed Response Surface Models.
IEEE Trans. Instrum. Meas., 2015

Fault tolerant design of a field data modular readout architecture for railway applications.
Reliab. Eng. Syst. Saf., 2015

Hidden Markov Models approach used for life parameters estimations.
Reliab. Eng. Syst. Saf., 2015

A system for the dynamic response characterization of turbomachinery tip clearance measurement instruments based on capacitive probes.
Proceedings of the IEEE Sensors Applications Symposium, 2015

Theoretical modeling of an electrostatic Gas-Path debris detection system with experimental validation.
Proceedings of the IEEE Sensors Applications Symposium, 2015

Gas turbine sensor loop availability driven fall back strategies design.
Proceedings of the 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2015

A heuristic reliable model for guarded capacitive sensors to measure displacements.
Proceedings of the 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2015

High performance liquid chromatography LCC analysis.
Proceedings of the 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2015

2014
A Zero-Crossing Detection System Based on FPGA to Measure the Angular Vibrations of Rotating Shafts.
IEEE Trans. Instrum. Meas., 2014

Exhaust Thermoelements Redundant Strategy to Improve Temperature Reading Reliability and Serviceability.
Proceedings of the SMARTGREENS 2014, 2014

A new wireless interface for resistive chemical sensors.
Proceedings of the IEEE 11th International Multi-Conference on Systems, Signals & Devices, 2014

HMM used for component parameters apportionment.
Proceedings of the IEEE 11th International Multi-Conference on Systems, Signals & Devices, 2014

2013
Measurement of Angular Vibrations in Rotating Shafts: Effects of the Measurement Setup Nonidealities.
IEEE Trans. Instrum. Meas., 2013

Physically Unclonable Functions Derived From Cellular Neural Networks.
IEEE Trans. Circuits Syst. I Regul. Pap., 2013

A 1-bit Physically Unclonable Function based on a two-neurons CNN.
Proceedings of the 2013 IEEE International Symposium on Circuits and Systems (ISCAS2013), 2013

Availability modeling of a safe communication system for rolling stock applications.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

Versatile measurement system for the characterization of gas sensing materials.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

Surface state model for metal oxide p-type conductometric CO sensors.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

2012
Efficient implementation of pseudochaotic piecewise linear maps with high digitization accuracies.
Int. J. Circuit Theory Appl., 2012

Performance Analysis of Digital Sliding Mode Controlled Inverters.
Proceedings of the SMARTGREENS 2012 - Proceedings of the 1st International Conference on Smart Grids and Green IT Systems, Porto, Portugal, 19, 2012

2011
Digitized Chaos for Pseudo-random Number Generation in Cryptography.
Proceedings of the Chaos-Based Cryptography - Theory, Algorithms and Applications, 2011

Design, Modeling, and Test of a System for Atmospheric Electric Field Measurement.
IEEE Trans. Instrum. Meas., 2011

Pseudo-Chaotic Lossy Compressors for True Random Number Generation.
IEEE Trans. Circuits Syst. I Regul. Pap., 2011

Pseudo-chaotic lossy compression of TRBGs.
Proceedings of the International Symposium on Circuits and Systems (ISCAS 2011), 2011

2010
A Variability-Tolerant Feedback Technique for Throughput Maximization of Trbgs with Predefined Entropy.
J. Circuits Syst. Comput., 2010

Exploiting Chaotic Dynamics for a-d converter Testing.
Int. J. Bifurc. Chaos, 2010

2009
Chaos Based Generation of True Random Bits.
Proceedings of the Intelligent Computing Based on Chaos, 2009

Model and Experimental Characterization of the Dynamic Behavior of Low-Power Carbon Monoxide MOX Sensors Operated With Pulsed Temperature Profiles.
IEEE Trans. Instrum. Meas., 2009

Invariant Measures of Tunable Chaotic Sources: Robustness Analysis and Efficient Estimation.
IEEE Trans. Circuits Syst. I Regul. Pap., 2009

A two electrode C-NiO Nafion amperometric sensor for NO<sub>2</sub> detection.
Microelectron. J., 2009

An Efficient and Accurate Method for the Estimation of Entropy and Other Dynamical Invariants for Piecewise Affine Chaotic Maps.
Int. J. Bifurc. Chaos, 2009

2008
An efficient and accurate method for computing the invariant measure of piecewise affine chaotic maps.
Proceedings of the International Symposium on Circuits and Systems (ISCAS 2008), 2008

2007
A Class of Maximum-Period Nonlinear Congruential Generators Derived From the Rényi Chaotic Map.
IEEE Trans. Circuits Syst. I Regul. Pap., 2007

Maximum-Period PRNGs Derived From A Piecewise Linear One-Dimensional Map.
Proceedings of the International Symposium on Circuits and Systems (ISCAS 2007), 2007

On the generation of pseudo-random sequences exploiting digitized chaotic systems.
Proceedings of the 18th European Conference on Circuit Theory and Design, 2007

2006
Surface State Model for Conductance Responses During Thermal-Modulation of SnO <sub>2</sub> -Based Thick Film Sensors: Part I - Model Derivation.
IEEE Trans. Instrum. Meas., 2006

Surface State Model for Conductance Responses During Thermal-Modulation of SnO <sub>2</sub> -Based Thick Film Sensors: Part II - Experimental Verification.
IEEE Trans. Instrum. Meas., 2006

The Digital Tent Map: Performance Analysis and Optimized Design as a Low-Complexity Source of Pseudorandom Bits.
IEEE Trans. Instrum. Meas., 2006

Low-hardware complexity PRBGs based on a piecewise-linear chaotic map.
IEEE Trans. Circuits Syst. II Express Briefs, 2006

A feedback strategy to improve the entropy of a chaos-based random bit generator.
IEEE Trans. Circuits Syst. I Regul. Pap., 2006

A technique to design high entropy chaos-based true random bit generators.
Proceedings of the International Symposium on Circuits and Systems (ISCAS 2006), 2006

Efficient Post-Processing Module for a Chaos-based Random Bit Generator.
Proceedings of the 13th IEEE International Conference on Electronics, 2006

2005
Temperature profile investigation of SnO<sub>2</sub> sensors for CO detection enhancement.
IEEE Trans. Instrum. Meas., 2005

Automated selection of test frequencies for fault diagnosis in analog electronic circuits.
IEEE Trans. Instrum. Meas., 2005

An approach to the design of PFSCL gates.
Proceedings of the International Symposium on Circuits and Systems (ISCAS 2005), 2005

Long period pseudo random bit generators derived from a discretized chaotic map.
Proceedings of the International Symposium on Circuits and Systems (ISCAS 2005), 2005

2004
Digital correction techniques for accuracy improvement in measurements of SnO<sub>2</sub> sensor impedance.
IEEE Trans. Instrum. Meas., 2004

An efficient implementation of PRNGs based on the digital sawtooth map.
Int. J. Circuit Theory Appl., 2004

Positive-Feedback Source-Coupled Logic: a delay model.
Proceedings of the 2004 International Symposium on Circuits and Systems, 2004

Hardware-efficient PRBGs based on 1-D piecewise linear chaotic maps.
Proceedings of the 2004 11th IEEE International Conference on Electronics, 2004

2003
A measurement system for odor classification based on the dynamic response of QCM sensors.
IEEE Trans. Instrum. Meas., 2003

Tin oxide gas sensing: comparison among different measurement techniques for gas mixture classification.
IEEE Trans. Instrum. Meas., 2003

Analysis and design of digital PRNGS based on the discretized sawtooth map.
Proceedings of the 2003 10th IEEE International Conference on Electronics, 2003

2002
Soft fault detection and isolation in analog circuits: some results and a comparison between a fuzzy approach and radial basis function networks.
IEEE Trans. Instrum. Meas., 2002

SBT soft fault diagnosis in analog electronic circuits: a sensitivity-based approach by randomized algorithms.
IEEE Trans. Instrum. Meas., 2002

1996
Vascular network tracking in SLO ocular fundus images for static and dynamic parameter extraction.
Proceedings of the 8th European Signal Processing Conference, 1996


  Loading...