Elia Landi
Orcid: 0000-0003-2797-481XAffiliations:
- University of Siena, Italy
According to our database1,
Elia Landi
authored at least 38 papers
between 2018 and 2023.
Collaborative distances:
Collaborative distances:
Timeline
Legend:
Book In proceedings Article PhD thesis Dataset OtherLinks
Online presence:
-
on orcid.org
On csauthors.net:
Bibliography
2023
A Low Complexity Rolling Bearing Diagnosis Technique Based on Machine Learning and Smart Preprocessing.
Sensors, September, 2023
A Distributed IoT Air Quality Measurement System for High-Risk Workplace Safety Enhancement.
Sensors, 2023
Proceedings of the IEEE International Conference on Metrology for eXtended Reality, 2023
Proceedings of the 2023 IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2023
Proceedings of the 2023 IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2023
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2023
Performance of reinforced epoxy resin embedded MEMS accelerometers for IoT condition monitoring.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2023
2022
Assessment of LoRaWAN Transmission Systems Under Temperature and Humidity, Gas, and Vibration Aging Effects Within IIoT Contexts.
IEEE Trans. Instrum. Meas., 2022
IEEE Trans. Instrum. Meas., 2022
Performance Evaluation of an IoT Sensor Node for Health Monitoring of Artwork and Ancient Wooden Structures.
Sensors, 2022
Strategies for the Accurate Measurement of the Resonance Frequency in QCM-D Systems via Low-Cost Digital Techniques.
Sensors, 2022
Calibration of a multicomponent MEMS sensor for vibration monitoring of rolling bearings: broad-band and amplitude traceability up to 20 kHz.
Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2022
High Performance Analog MEMS for IoT Based Condition Monitoring, Characterization with a Bearing Failure Emulation Test Bench.
Proceedings of the IEEE International Workshop on Metrology for Automotive, 2022
Roller Bearing Failures Classification with Low Computational Cost Embedded Machine Learning.
Proceedings of the IEEE International Workshop on Metrology for Automotive, 2022
Monitoring of the Viscoelastic Behaviour of Bacterial Biofilms Exploiting an Accurate QCM System.
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2022
Hand-Arm Vibration Monitoring via Embedded Machine Learning on Low Power Wearable Devices.
Proceedings of the IEEE International Symposium on Measurements & Networking, 2022
A Novel Front-End Circuit for the Digital Conversion of QCM-D Responses for FPGA-Based Frequency Measurements.
Proceedings of the Applications in Electronics Pervading Industry, Environment and Society, 2022
Proceedings of the Sensors and Microsystems, 2022
2021
A LoRaWAN Carbon Monoxide Measurement System With Low-Power Sensor Triggering for the Monitoring of Domestic and Industrial Boilers.
IEEE Trans. Instrum. Meas., 2021
An Adaptive Measurement System for the Simultaneous Evaluation of Frequency Shift and Series Resistance of QCM in Liquid.
Sensors, 2021
Ion Current Sensor for Gas Turbine Condition Dynamical Monitoring: Modeling and Characterization.
Sensors, 2021
Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2021
Real Time Car Passengers Comfort Monitoring by means of Environmental and Vibrational Measurements.
Proceedings of the IEEE International Workshop on Metrology for Automotive, 2021
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2021
2020
Performance Analysis of a Humidity Sensor Based on a Microresonator Functionalized With TiO<sub>2</sub> Nanoparticles.
IEEE Trans. Instrum. Meas., 2020
Reliab. Eng. Syst. Saf., 2020
Proceedings of the 2020 IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2020
A Characterization System for Bearing Condition Monitoring Sensors, a Case Study with a Low Power Wireless Triaxial MEMS Based Sensor.
Proceedings of the 2020 IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2020
Impedance Measurement Exploited for Anaphylaxis Prediction in Casein Allergic Children.
Proceedings of the 2020 IEEE International Symposium on Medical Measurements and Applications, 2020
Reliability and Availability Evaluation of Linear LoRaWAN Sensor Network Architectures for Pipeline Monitoring.
Proceedings of the 2020 IEEE International Instrumentation and Measurement Technology Conference, 2020
2019
Instantaneous Rotation Speed Measurement System Based on Variable Reluctance Sensors for Torsional Vibration Monitoring.
IEEE Trans. Instrum. Meas., 2019
A wearable Low-cost Measurement System for Estimation of Human Exposure to Vibrations.
Proceedings of the 5th IEEE International forum on Research and Technology for Society and Industry, 2019
Proceedings of the 2nd Workshop on Metrology for Industry 4.0 and IoT MetroInd4.0&IoT 2019, 2019
Proceedings of the 5th IEEE International Symposium on Measurements & Networking, 2019
Proceedings of the International Symposium on Systems Engineering, 2019
2018
Instantaneous rotation speed measurement system based on variable reluctance sensors: Model and analysis of performance.
Proceedings of the 2018 IEEE Sensors Applications Symposium, 2018
Turbomachinery Clearance Monitoring Based on Passive Variable Reluctance Magnetic Sensors.
Proceedings of the IEEE International Symposium on Circuits and Systems, 2018
A Distributed Condition Monitoring System for the Non-invasive Temperature Measurement of Heat Fluids Circulating in Turbomachinery Pipes Based on Self-Powered Sensing Nodes.
Proceedings of the Applications in Electronics Pervading Industry, Environment and Society, 2018