Dario Panariello

According to our database, Dario Panariello authored at least 11 papers between 2019 and 2021.

Collaborative distances:

• Dijkstra number of five.
• Erdős number of four.

2021

Enhancing joint torque estimation of the workers using 3D body models.

Teodorico Caporaso, Stanislao Grazioso, Dario Panariello, R. Ruggiero, Angela Palomba, Giuseppe Di Gironimo

Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2021

2020

Validation of a novel wearable solution for measuring L5/S1 load during manual material handling tasks.

Ilaria Conforti, Ilaria Mileti, Dario Panariello, Teodorico Caporaso, Stanislao Grazioso, Zaccaria Del Prete, Antonio Lanzotti, Giuseppe Di Gironimo, Eduardo Palermo

Proceedings of the 2020 IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2020

A preliminary approach for swimming performance analysis of FISDIR elite athletes with intellectual impairment using an inertial sensor.

Teodorico Caporaso, Matthew Worsey, Hugo G. Espinosa, David Victor Thiel, Angela Palomba, Stanislao Grazioso, Dario Panariello, Giuseppe Di Gironimo, Antonio Lanzotti

Proceedings of the 2020 IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2020

Comparison among different inertial-based algorithms for the automatic detection of temporal events in sprint tests: a preliminary study on elite athletes with intellectual impairment.

Teodorico Caporaso, Angela Palomba, Stanislao Grazioso, Alessia Megna, Dario Panariello, Diego Perez, Piera Marchettoni, Giuseppe Di Gironimo, Antonio Lanzotti

Proceedings of the 2020 IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2020

Development of site-specific biomechanical indices for estimating injury risk in cycling.

Teodorico Caporaso, Angela Palomba, Stanislao Grazioso, Dario Panariello, Giuseppe Di Gironimo, Francesca Gimigliano, Giovanni Iolascon, Antonio Lanzotti

Proceedings of the 2020 IEEE International Symposium on Medical Measurements and Applications, 2020

2019

Evaluation of human joint angles in industrial tasks using OpenSim.

Dario Panariello, Stanislao Grazioso, Teodorico Caporaso, Angela Palomba, Giuseppe Di Gironimo, Antonio Lanzotti

Proceedings of the 2nd Workshop on Metrology for Industry 4.0 and IoT MetroInd4.0&IoT 2019, 2019

Using photogrammetric 3D body reconstruction for the design of patient-tailored assistive devices.

Stanislao Grazioso, Teodorico Caporaso, Mario Selvaggio, Dario Panariello, R. Ruggiero, Giuseppe Di Gironimo

Proceedings of the 2nd Workshop on Metrology for Industry 4.0 and IoT MetroInd4.0&IoT 2019, 2019

Assessment of upper limb muscle synergies for industrial overhead tasks: a preliminary study.

Stanislao Grazioso, Teodorico Caporaso, Angela Palomba, S. Nardella, Benedetta M. V. Ostuni, Dario Panariello, Giuseppe Di Gironimo, Antonio Lanzotti

Proceedings of the 2nd Workshop on Metrology for Industry 4.0 and IoT MetroInd4.0&IoT 2019, 2019

A wearable inertial device based on biomechanical parameters for sports performance analysis in race-walking: preliminary results.

Teodorico Caporaso, Stanislao Grazioso, Dario Panariello, Giuseppe Di Gironimo, Antonio Lanzotti

Proceedings of the 2nd Workshop on Metrology for Industry 4.0 and IoT MetroInd4.0&IoT 2019, 2019

On the use of soft continuum robots for remote measurement tasks in constrained environments: a brief overview of applications.

Leopoldo Angrisani, Stanislao Grazioso, Giuseppe Di Gironimo, Dario Panariello, Annarita Tedesco

Proceedings of the 5th IEEE International Symposium on Measurements & Networking, 2019

Using the KUKA LBR iiwa Robot as Haptic Device for Virtual Reality Training of Hip Replacement Surgery.

Dario Panariello, Teodorico Caporaso, Stanislao Grazioso, Giuseppe Di Gironimo, Antonio Lanzotti, Sebastian Knopp, Luigi Pelliccia, Mario Lorenz, Philipp Klimant

Proceedings of the 3rd IEEE International Conference on Robotic Computing, 2019