Edward K. F. Lee

According to our database1, Edward K. F. Lee authored at least 43 papers between 1992 and 2018.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

On csauthors.net:

Bibliography

2018
A Power Efficient LDO-Type Wireless Battery Charger for Biomedical Implants Based on Direct Charging from Regulated Rectifier Current.
Proceedings of the IEEE International Symposium on Circuits and Systems, 2018

2017
A rectifier/AC shunt regulator combo circuit with inherent AM demodulation front-end for wireless powered implants.
Proceedings of the IEEE International Symposium on Circuits and Systems, 2017

A ±5V, ±10V, ±15V, 4-channel class-G biphasic constant-current stimulator.
Proceedings of the 2017 IEEE Custom Integrated Circuits Conference, 2017

2016
Passive rectifier/regulator combo circuits with embedded bandgap voltage reference.
Proceedings of the IEEE International Symposium on Circuits and Systems, 2016

2015
A Discrete Controlled Fully Integrated Class E Coil Driver With Power Efficient ASK Modulation for Powering Biomedical Implants.
IEEE Trans. Circuits Syst. I Regul. Pap., 2015

A 45V 10-b electrode monitoring analog-to-digital converter.
Proceedings of the 2015 IEEE International Symposium on Circuits and Systems, 2015

A low voltage CMOS differential/floating bandgap voltage reference circuit.
Proceedings of the 2015 IEEE International Symposium on Circuits and Systems, 2015

A voltage doubling passive rectifier/regulator circuit for biomedical implants.
Proceedings of the 2015 IEEE Custom Integrated Circuits Conference, 2015

2014
An integrated coil driver with discrete control and power efficient ASK modulation for transcutaneous power transmission.
Proceedings of the IEEE International Symposium on Circuits and Systemss, 2014

A low voltage auto-reconfigured power-on-reset/bandgap reference circuit.
Proceedings of the IEEE International Symposium on Circuits and Systemss, 2014

A multiple-output fixed current stimulation ASIC for peripherally-implantable neurostimulation system.
Proceedings of the IEEE 2014 Custom Integrated Circuits Conference, 2014

2013
A low voltage low output impedance CMOS bandgap voltage reference.
Proceedings of the 2013 IEEE International Symposium on Circuits and Systems (ISCAS2013), 2013

An active rectifier/regulator combo circuit for powering biomedical implants.
Proceedings of the IEEE 2013 Custom Integrated Circuits Conference, 2013

2012
A 36V biphasic stimulator with electrode monitoring circuit.
Proceedings of the 2012 IEEE International Symposium on Circuits and Systems, 2012

A sub-0.5V, 1.5µW rail-to-rail constant gm opamp and its filter application.
Proceedings of the 2012 IEEE International Symposium on Circuits and Systems, 2012

A feedback controlled coil driver for transcutaneous power transmission.
Proceedings of the IEEE 2012 Custom Integrated Circuits Conference, 2012

2011
An Inside Body Power and Bidirectional Data Transfer IC Module Pair.
IEEE J. Solid State Circuits, 2011

A capacitor-based AC-DC step-up converter for biomedical implants.
Proceedings of the 2011 IEEE Custom Integrated Circuits Conference, 2011

2010
Low voltage CMOS bandgap references with temperature compensated reference current output.
Proceedings of the International Symposium on Circuits and Systems (ISCAS 2010), May 30, 2010

High-voltage rectifier and voltage doubler in conventional 0.18μm CMOS process.
Proceedings of the International Symposium on Circuits and Systems (ISCAS 2010), May 30, 2010

2009
A Low Voltage CMOS Bandgap Reference without using an Opamp.
Proceedings of the International Symposium on Circuits and Systems (ISCAS 2009), 2009

A 3 - 14V rail-to-rail constant gm opamp in conventional 0.18µm CMOS process.
Proceedings of the IEEE Custom Integrated Circuits Conference, 2009

High-voltage tolerant stimulation monitoring circuit in conventional CMOS process.
Proceedings of the IEEE Custom Integrated Circuits Conference, 2009

2008
A 0.65V rail-to-rail constant gm opamp for biomedical applications.
Proceedings of the International Symposium on Circuits and Systems (ISCAS 2008), 2008

2007
A Matching Technique for Biphasic Stimulation Pulse.
Proceedings of the International Symposium on Circuits and Systems (ISCAS 2007), 2007

2006
A 1V 420μW 32-channel Cortical Signal Interface.
Proceedings of the IEEE 2006 Custom Integrated Circuits Conference, 2006

2005
A low voltage low 1/f noise CMOS bandgap reference.
Proceedings of the International Symposium on Circuits and Systems (ISCAS 2005), 2005

2002
A low-power segmented nonlinear DAC-based direct digital frequency synthesizer.
IEEE J. Solid State Circuits, 2002

2001
Design of low-voltage CMOS continuous-time filter with on-chip automatic tuning.
IEEE J. Solid State Circuits, 2001

A reconfigurable pipelined data converter.
Proceedings of the 2001 International Symposium on Circuits and Systems, 2001

Segmented sine wave digital-to-analog converters for frequency synthesizer.
Proceedings of the 2001 International Symposium on Circuits and Systems, 2001

Design of a 1 V 250 MHz current-mode filter in conventional CMOS process.
Proceedings of the 2001 International Symposium on Circuits and Systems, 2001

A ROM-less direct digital frequency synthesizer using segmented nonlinear digital-to-analog converter.
Proceedings of the IEEE 2001 Custom Integrated Circuits Conference, 2001

2000
A 1-V, 8-bit successive approximation ADC in standard CMOS process.
IEEE J. Solid State Circuits, 2000

Design of 1 V switched-current cells in standard CMOS process.
Proceedings of the IEEE International Symposium on Circuits and Systems, 2000

A 1.2 V bandgap reference based on transimpedance amplifier.
Proceedings of the IEEE International Symposium on Circuits and Systems, 2000

1999
Design of low-power ROM-less direct digital frequency synthesizer using nonlinear digital-to-analog converter.
IEEE J. Solid State Circuits, 1999

A new multipath amplifier design technique for enhancing gain without sacrificing bandwidth.
Proceedings of the 1999 International Symposium on Circuits and Systems, ISCAS 1999, Orlando, Florida, USA, May 30, 1999

An asynchronous data recovery/retransmission technique with foreground DLL calibration.
Proceedings of the 1999 International Symposium on Circuits and Systems, ISCAS 1999, Orlando, Florida, USA, May 30, 1999

A 1 V front-end interface for switched-op amp circuits.
Proceedings of the 1999 International Symposium on Circuits and Systems, ISCAS 1999, Orlando, Florida, USA, May 30, 1999

A digital technique for reducing clock jitter effects in time-interleaved A/D converter.
Proceedings of the 1999 International Symposium on Circuits and Systems, ISCAS 1999, Orlando, Florida, USA, May 30, 1999

1997
Reconfigurable data converter as a building block for mixed-signal test.
Proceedings of the European Design and Test Conference, 1997

1992
Dynamic Current-Mode Multi-Valued MOS Memory with Error Correction.
Proceedings of the 22nd IEEE International Symposium on Multiple-Valued Logic, 1992


  Loading...