Eric Monmasson

According to our database1, Eric Monmasson authored at least 69 papers between 2001 and 2019.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Other 

Links

Homepages:

On csauthors.net:

Bibliography

2019
Robustness Study of a Cascaded Dual Model-Predictive Control Applied to Synchronous Motors.
IEEE Trans. Industrial Electronics, 2019

An Adaptive PI Controller Design for DC-Link Voltage Control of Single-Phase Grid-Connected Converters.
IEEE Trans. Industrial Electronics, 2019

Voltage Control of a Stand-Alone Cascaded Doubly Fed Induction Generator.
IEEE Trans. Industrial Electronics, 2019

Embedded real-time simulators for electromechanical and power electronic systems using system-on-chip devices.
Mathematics and Computers in Simulation, 2019

Preface.
Mathematics and Computers in Simulation, 2019

SoC implementation of a photovoltaic reconfiguration algorithm by exploiting a HLS-based architecture.
Mathematics and Computers in Simulation, 2019

Grid connected converters as reactive power ancillary service providers: Technical analysis for minimum required DC-link voltage.
Mathematics and Computers in Simulation, 2019

2018
Interests and Limits of Machine Learning-Based Neural Networks for Rotor Position Estimation in EV Traction Drives.
IEEE Trans. Industrial Informatics, 2018

Modular Multi-level Converter Hardware-in-the-Loop Simulation on low-cost System-on-Chip devices.
Proceedings of the IECON 2018, 2018

Study of System-on-Chip devices to implement embedded real-time simulators of modular multi-level converters using high-level synthesis tools.
Proceedings of the IEEE International Conference on Industrial Technology, 2018

The effect of prediction horizons in MPC for first order linear systems.
Proceedings of the IEEE International Conference on Industrial Technology, 2018

Design of an adaptive feed-forward control scheme for the DC bus voltage control of single phase grid connected converters.
Proceedings of the IEEE International Conference on Industrial Technology, 2018

2017
FPGA-Based Implementation of Dual Kalman Filter for PV MPPT Applications.
IEEE Trans. Industrial Informatics, 2017

Improved electrical model of aluminum electrolytic capacitor with anomalous diffusion for health monitoring.
Mathematics and Computers in Simulation, 2017

FPGA based implementation of a sliding-mode observer for battery state of charge estimation.
Proceedings of the 26th IEEE International Symposium on Industrial Electronics, 2017

FPGA implementation of the EIS technique for the on-line diagnosis of fuel-cell systems.
Proceedings of the 26th IEEE International Symposium on Industrial Electronics, 2017

Hybrid position estimator based on high-frequency signal injection and machine learning for EV fault-tolerant control.
Proceedings of the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, October 29, 2017

2016
Cascaded Dual-Model-Predictive Control of an Active Front-End Rectifier.
IEEE Trans. Industrial Electronics, 2016

FPGA-Based Fault-Tolerant Space Vector-Hysteresis Current Control for Three-Phase Grid-Connected Converter.
IEEE Trans. Industrial Electronics, 2016

ADC-Based Embedded Real-Time Simulator of a Power Converter Implemented in a Low-Cost FPGA: Application to a Fault-Tolerant Control of a Grid-Connected Voltage-Source Rectifier.
IEEE Trans. Industrial Electronics, 2016

Simple and systematic LCL filter design for three-phase grid-connected power converters.
Mathematics and Computers in Simulation, 2016

Fixed structure H loop shaping control of switched reluctance motor for electrical vehicle.
Mathematics and Computers in Simulation, 2016

Power operating domain of a cascaded doubly fed induction machine.
Mathematics and Computers in Simulation, 2016

Generic optimal control of synchronous motors.
IJAAC, 2016

Compensation of cross-saturation effects on IPMSM sensorless control - application to electric vehicle.
Proceedings of the IECON 2016, 2016

Evaluation of SoC-based embedded Real-Time simulators for electromechanical systems.
Proceedings of the IECON 2016, 2016

FPGA-based Space Vector Delta Modulation Current Controller for Grid connected Converters.
Proceedings of the IECON 2016, 2016

System-on-chip implementation of a PV dynamical reconfiguration algorithm.
Proceedings of the IECON 2016, 2016

2015
Dual-Kalman-Filter-Based Identification and Real-Time Optimization of PV Systems.
IEEE Trans. Industrial Electronics, 2015

Experimental evaluation of second sliding modes observer and Extended Kalman Filter in a sensorless robust control of Switched Reluctance Motor for EV application.
Proceedings of the 23rd Mediterranean Conference on Control and Automation, 2015

Comparison of the water heating technique's impact on the sizing of a standalone PV-battery backup system assisting an intermittent primary energy source.
Proceedings of the IECON 2015, 2015

Control of a cascaded doubly fed induction generator supplying an isolated DC grid.
Proceedings of the IECON 2015, 2015

Evaluation of the new generation of system-on-chip platforms for controlling electrical systems.
Proceedings of the IEEE International Conference on Industrial Technology, 2015

2014
Optimization of Perturbative PV MPPT Methods Through Online System Identification.
IEEE Trans. Industrial Electronics, 2014

Robust LPV current control of Switched Reluctance Motors.
Proceedings of the 22nd Mediterranean Conference on Control and Automation, 2014

Robust controller designs of switched reluctance motor for electrical vehicle.
Proceedings of the 22nd Mediterranean Conference on Control and Automation, 2014

FPGA-based implementation of an adaptive P&O MPPT controller for PV applications.
Proceedings of the 23rd IEEE International Symposium on Industrial Electronics, 2014

New voltage sensorless approach for maximum constant power tracking of WECS based on a cascaded DFIG.
Proceedings of the IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society, Dallas, TX, USA, October 29, 2014

Experimental robust H∞ controller design of switched reluctance motor for electrical vehicle application.
Proceedings of the 2014 IEEE Conference on Control Applications, 2014

2013
FPGA-Based Dynamic Reconfiguration of Sliding Mode Current Controllers for Synchronous Machines.
IEEE Trans. Industrial Informatics, 2013

Hardware/Software Codesign Guidelines for System on Chip FPGA-Based Sensorless AC Drive Applications.
IEEE Trans. Industrial Informatics, 2013

Industrial Applications of the Kalman Filter: A Review.
IEEE Trans. Industrial Electronics, 2013

FPGA-based sliding mode direct control of single phase PWM boost rectifier.
Mathematics and Computers in Simulation, 2013

Hybrid excitation synchronous generator in embedded applications: Modeling and control.
Mathematics and Computers in Simulation, 2013

Optimal hardware/software partitioning of a system on chip FPGA-based sensorless AC drive current controller.
Mathematics and Computers in Simulation, 2013

Sliding mode direct power control of three-phase PWM boost rectifier using a single DC current sensor.
Proceedings of the IECON 2013, 2013

On-line optimization of the P&O MPPT method by means of the system identification.
Proceedings of the IECON 2013, 2013

FPGA-based Real-Time Hardware-In-the-Loop validation of a 3-phase PWM rectifier controller.
Proceedings of the IECON 2013, 2013

Industrial electronic control: FPGAs and embedded systems solutions.
Proceedings of the IECON 2013, 2013

2012
Fully FPGA-Based Sensorless Control for Synchronous AC Drive Using an Extended Kalman Filter.
IEEE Trans. Industrial Electronics, 2012

Introduction to the Special Section on Industrial Applications and Implementation Issues of the Kalman Filter.
IEEE Trans. Industrial Electronics, 2012

A modified cross-correlation method for the identification of systems with large bandwidth.
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012

Full system on programmable chip solution for DPC control of three phase PWM boost rectifier.
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012

Generic thermal model of electric appliances integrated in low energy building.
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012

Hybrid excitation synchronous motor control in electric vehicle with copper and iron losses minimization.
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012

2011
FPGAs in Industrial Control Applications.
IEEE Trans. Industrial Informatics, 2011

Control of DFIG for wind energy in a network context: A new formulation and interpretation of the control specifications.
Proceedings of the 2nd IEEE PES International Conference and Exhibition on "Innovative Smart Grid Technologies", 2011

2010
Modeling and control of a cascaded doubly-fed induction generator based on dynamical equivalent circuits.
Mathematics and Computers in Simulation, 2010

Editorial.
Mathematics and Computers in Simulation, 2010

2009
Modeling and Control of a Cascaded Doubly Fed Induction Generator Dedicated to Isolated Grids.
IEEE Trans. Industrial Electronics, 2009

Fully Integrated FPGA-Based Controller for Synchronous Motor Drive.
IEEE Trans. Industrial Electronics, 2009

2008
Control of a Hybrid Excitation Synchronous Generator for Aircraft Applications.
IEEE Trans. Industrial Electronics, 2008

2007
FPGA-Based Current Controllers for AC Machine Drives - A Review.
IEEE Trans. Industrial Electronics, 2007

FPGA Design Methodology for Industrial Control Systems - A Review.
IEEE Trans. Industrial Electronics, 2007

2006
Modeling and simulation of a hybrid dynamic system used in haptic interfaces.
Mathematics and Computers in Simulation, 2006

2005
Synthesis of direct torque and rotor flux control algorithms by means of sliding-mode theory.
IEEE Trans. Industrial Electronics, 2005

2003
Presentation of a control law for IM drive based on the dynamic reconfiguration of a DTC algorithm and a SVM-DTC algorithm.
Mathematics and Computers in Simulation, 2003

Control structures for multi-machine multi-converter systems with upstream coupling.
Mathematics and Computers in Simulation, 2003

2001
Extension of the DTC concept.
IEEE Trans. Industrial Electronics, 2001


  Loading...