Gijs J. M. Krijnen

According to our database, Gijs J. M. Krijnen authored at least 27 papers between 2010 and 2025.

Collaborative distances:

• Dijkstra number of five.
• Erdős number of four.

2025

Sensitivity increase of 3D printed, self-sensing, carbon fibers structures with conductive filament matrix due to flexural loading.

Matei Drilea, Alexander Dijkshoorn, Gusthavo Ribeiro Salomão, Stefano Stramigioli, Gijs J. M. Krijnen

CoRR, December, 2025

Deciphering Muscular Dynamics: A Dual-Attention Framework for Predicting Muscle Contraction From Activation Patterns.

Bangyu Lan, Gijs J. M. Krijnen, Stefano Stramigioli, Kenan Niu

IEEE J. Biomed. Health Informatics, September, 2025

2022

Automated xy calibration for 3D printers using a scanner.

Martijn Schouten, Leon Abelmann, Gijs J. M. Krijnen

Dataset, June, 2022

Summation of currents electromagnetic solver.

Martijn Schouten, Leon Abelmann, Gijs J. M. Krijnen

Dataset, June, 2022

Inductive 3D printer XY calibration GUI.

Martijn Schouten, Leon Abelmann, Gijs J. M. Krijnen

Dataset, June, 2022

3D Printed Soft Robotic Actuator With Embedded Strain Sensing For Position Estimation.

Gerjan Wolterink, Stijn Kolkman, Gijs J. M. Krijnen

Proceedings of the 2022 IEEE Sensors, Dallas, TX, USA, October 30 - Nov. 2, 2022, 2022

Evaluating 3D printed sEMG electrodes with silver ink traces using in-situ impedance measurements.

Martijn Schouten, Philip van de Maat, Kostas Nizamis, Gijs J. M. Krijnen

Proceedings of the 2022 IEEE Sensors, Dallas, TX, USA, October 30 - Nov. 2, 2022, 2022

2021

Model Code of Anisotropic Electrical Conduction in Layered 3D-Prints with Fused Deposition Modeling.

Alexander Dijkshoorn, Martijn Schouten, Stefano Stramigioli, Gijs J. M. Krijnen

Dataset, April, 2021

A 3D-Printed Soft Fingertip Sensor for Providing Information about Normal and Shear Components of Interaction Forces.

Gerjan Wolterink, Remco G. P. Sanders, Bert-Jan van Beijnum, Peter H. Veltink, Gijs J. M. Krijnen

Sensors, 2021

Modelling of Anisotropic Electrical Conduction in Layered Structures 3D-Printed with Fused Deposition Modelling.

Alexander Dijkshoorn, Martijn Schouten, Stefano Stramigioli, Gijs J. M. Krijnen

Sensors, 2021

Characterization of 3D printed sheets using multi-frequency scanning impedance microscopy.

Martijn Schouten, Gijs J. M. Krijnen

Proceedings of the 2021 IEEE Sensors, Sydney, Australia, October 31 - Nov. 3, 2021, 2021

Development of a 3D Printed Gap Gauge with Embedded Force Sensor for Balancing Unicompartmental Knee Arthroplasty.

Dimitrios Kosmas, Hans-Peter van Jonbergen, Martijn Schouten, Momen Abayazid, Gijs J. M. Krijnen

Proceedings of the 2021 IEEE Sensors, Sydney, Australia, October 31 - Nov. 3, 2021, 2021

DC Electric Metamaterial Behaviour in Tuned Fused Deposition Modelling Prints.

Alexander Dijkshoorn, Thijs Hamstra, Remco Sanders, Stefano Stramigioli, Gijs J. M. Krijnen

Proceedings of the 2021 IEEE Sensors, Sydney, Australia, October 31 - Nov. 3, 2021, 2021

2020

Development of Soft sEMG Sensing Structures Using 3D-Printing Technologies.

Gerjan Wolterink, Pedro Dias, Remco G. P. Sanders, Frodo Muijzer, Bert-Jan van Beijnum, Peter H. Veltink, Gijs J. M. Krijnen

Sensors, 2020

3D-Printed Calorimetric Flow Sensor.

Gerjan Wolterink, Ameya Umrani, Martijn Schouten, Remco G. P. Sanders, Gijs J. M. Krijnen

Proceedings of the 2020 IEEE Sensors, Rotterdam, The Netherlands, October 25-28, 2020, 2020

Hysteresis Compensation of 3D Printed Sensors Using a Power Law Model for Various Input Signals.

Martijn Schouten, Dimitrios Kosmas, Gijs J. M. Krijnen

Proceedings of the 2020 IEEE Sensors, Rotterdam, The Netherlands, October 25-28, 2020, 2020

In-Situ Monitoring of Layer-Wise Fabrication by Electrical Resistance Measurements in 3D Printing.

Alexander Dijkshoorn, Patrick Neuvel, Stefano Stramigioli, Gijs J. M. Krijnen

Proceedings of the 2020 IEEE Sensors, Rotterdam, The Netherlands, October 25-28, 2020, 2020

2019

A flexible, three material, 3D-printed, shear force sensor for use on finger tips.

Gerjan Wolterink, Remco Sanders, Gijs J. M. Krijnen

Proceedings of the 2019 IEEE SENSORS, Montreal, QC, Canada, October 27-30, 2019, 2019

Linearisation of a 3D printed flexible tactile sensor based on piezoresistive sensing.

Martijn Schouten, Bernard Prakken, Remco Sanders, Gijs J. M. Krijnen

Proceedings of the 2019 IEEE SENSORS, Montreal, QC, Canada, October 27-30, 2019, 2019

2018

Thin, Flexible, Capacitive Force Sensors Based on Anisotropy in 3D-Printed Structures.

Gerjan Wolterink, Remco Sanders, Gijs J. M. Krijnen

Proceedings of the 2018 IEEE SENSORS, New Delhi, India, October 28-31, 2018, 2018

2017

3D-printing soft sEMG sensing structures.

Gerjan Wolterink, Remco Sanders, Frodo Muijzer, Bert-Jan van Beijnum, Gijs J. M. Krijnen

Proceedings of the 2017 IEEE SENSORS, Glasgow, United Kingdom, October 29, 2017

3D printed flexible capacitive force sensor with a simple micro-controller based readout.

Martijn Schouten, Remco G. P. Sanders, Gijs J. M. Krijnen

Proceedings of the 2017 IEEE SENSORS, Glasgow, United Kingdom, October 29, 2017

Development of whisker inspired 3D multi-material printed flexible tactile sensors.

Bram Eijking, Remco Sanders, Gijs J. M. Krijnen

Proceedings of the 2017 IEEE SENSORS, Glasgow, United Kingdom, October 29, 2017

2016

3D printed biomimetic whisker-based sensor with co-planar capacitive sensing.

John Delamare, Remco Sanders, Gijs J. M. Krijnen

Proceedings of the 2016 IEEE SENSORS, Orlando, FL, USA, October 30 - November 3, 2016, 2016

2013

Tunable Sensor Response by Voltage-Control in Biomimetic Hair Flow Sensors.

Harmen Droogendijk, Christiaan M. Bruinink, Remco G. P. Sanders, Gijs J. M. Krijnen

Micromachines, 2013

Controllable elastocapillary folding of silicon nitride 3D structures by through-wafer filling.

Antoine Legrain, T. G. Janson, J. W. Berenschot, Gijs J. M. Krijnen, Leon Abelmann, Niels R. Tas

Proceedings of the 8th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2013

2010

High-Performance Shuffle Motor Fabricated by Vertical Trench Isolation Technology.

Edin Sarajlic, Christophe Yamahata, Erwin Berenschot, Niels R. Tas, Hiroyuki Fujita, Gijs J. M. Krijnen

Micromachines, 2010