Hiroyuki Fujita

According to our database1, Hiroyuki Fujita authored at least 51 papers between 1988 and 2021.

Collaborative distances:
  • Dijkstra number2 of four.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Other 

Links

On csauthors.net:

Bibliography

2021
A Design Framework for Invertible Logic.
IEEE Trans. Comput. Aided Des. Integr. Circuits Syst., 2021

Sparse Random Signals for Fast Convergence on Invertible Logic.
IEEE Access, 2021

2020
High-Throughput/Low-Energy MTJ-Based True Random Number Generator Using a Multi-Voltage/Current Converter.
IEEE Trans. Very Large Scale Integr. Syst., 2020

Design of an Energy-Efficient True Random Number Generator Based on Triple Read-Write Data-Stream Multiplexing of MTJ Devices.
Proceedings of the 18th IEEE International New Circuits and Systems Conference, 2020

2019
Improvement of the Device Descriptions of ECHONET Lite by adding version specific information.
Proceedings of the IEEE 8th Global Conference on Consumer Electronics, 2019

2018
Study of Stochastic Invertible Multiplier Designs.
Proceedings of the 25th IEEE International Conference on Electronics, Circuits and Systems, 2018

2015
A MEMS-based interactive laser scanning display with a collocated laser range finder.
IEICE Electron. Express, 2015

2013
Closed-loop control of silicon nanotweezers for improvement of sensitivity to mechanical stiffness measurement and bio-sensing on DNA molecules.
Proceedings of the 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems, 2013

Silicon Nanotweezers with a microfluidic cavity for the real time characterization of DNA damage under therapeutic radiation beams.
Proceedings of the 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 2013

Integrated MEMS platform with silicon nanotweezers and open microfluidic device for real-time and routine biomechanical probing on molecules and cells.
Proceedings of the 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 2013

2012
Electric contact stability of anti-wear probes.
IEICE Electron. Express, 2012

2011
Optimization of Liquid DiElectroPhoresis (LDEP) Digital Microfluidic Transduction for Biomedical Applications.
Micromachines, 2011

2010
High-Performance Shuffle Motor Fabricated by Vertical Trench Isolation Technology.
Micromachines, 2010

An SOI bulk-micromachined dual SPDT RF-MEMS switch by layer-wise separation design of waveguide and switching mechanism.
IEICE Electron. Express, 2010

A 12GHz bulk-micromachined RF-MEMS phase shifter by SOI layer-separation design.
IEICE Electron. Express, 2010

Optical coherence tomography by all-optical MEMS fiber endoscope.
IEICE Electron. Express, 2010

Biomotor-based nanotransport system constructed by pick-and-place assembly of individual molecules.
Proceedings of the 2010 IEEE/RSJ International Conference on Intelligent Robots and Systems, 2010

2009
A micromachined voltage controlled oscillator using the pull-in mechanism of electrostatic actuation.
IEICE Electron. Express, 2009

Contact Less Radio-frequencies Biosensor for Biological Parameters Analysis.
Proceedings of the BIODEVICES 2009, 2009

Delay-independent stabilization for teleoperation with time varying delay.
Proceedings of the American Control Conference, 2009

2008
Toward realization of transmissive display by MEMS etalon.
IEICE Electron. Express, 2008

In-Plane Bistable Nanowire For Memory Devices
CoRR, 2008

A study on process-compatibility in CMOS-first MEMS-last integration.
Proceedings of the IEEE 2008 Custom Integrated Circuits Conference, 2008

2007
FPGA-Based Decentralized Control of Arrayed MEMS for Microrobotic Application.
IEEE Trans. Ind. Electron., 2007

Consideration on Contact Mechanism of YBaCuO Bulk Superconductor with Deposited Metal Layer.
IEICE Trans. Electron., 2007

Fabrication of suspended metallic structures: application to a one-shot micro-valve.
IEICE Electron. Express, 2007

2006
A high fill-factor comb-driven XY-stage with topological layer switch architecture.
IEICE Electron. Express, 2006

Transparent color pixels using plastic MEMS technology for electronic papers.
IEICE Electron. Express, 2006

An electrostatically latched and magnetically erased MEMS re-writable bitmap image display.
IEICE Electron. Express, 2006

Development of high-yield fabrication technique for MEMS-PhC devices.
IEICE Electron. Express, 2006

Fluidic self-alignment applied to a micro-fluidic system.
IEICE Electron. Express, 2006

2005
Silicon periodic nano-structures obtained by laser exposure of nano-wires.
Microelectron. J., 2005

A two-dimensional ƒ-θ micro optical lens scanner with electrostatic comb-drive XY-stage.
IEICE Electron. Express, 2005

Self-assembly technique for MEMS vertical comb electrostatic actuator.
IEICE Electron. Express, 2005

2004
Conveyor for Pneumatic Two-Dimensional Manipulation Realized by Arrayed MEMS and its Control.
J. Robotics Mechatronics, 2004

MEMS Conveyance System for Pneumatic Two-dimensional Manipulation Based on Autonomous Distributed Systems.
Proceedings of the 2004 IEEE International Conference on Robotics and Automation, 2004

1998
Microactuators and micromachines.
Proc. IEEE, 1998

Application of Real-Time Temporal Logic to Design Fault Detection in Responsive Communication Protocols.
Proceedings of the 7th Asian Test Symposium (ATS '98), 2-4 December 1998, Singapore, 1998

1997
Two-dimensional conveyance system using cooperative motions of many fluidic microactuators.
Adv. Robotics, 1997

1996
Group work of distributed microactuators.
Robotica, 1996

A High Prformance Switch for OC-12 SONET Self-Healing Ring Networks.
IEEE J. Sel. Areas Commun., 1996

Two-dimensional conveyance system using cooperative motions of many microactuators.
Proceedings of IEEE/RSJ International Conference on Intelligent Robots and Systems. IROS 1996, 1996

1995
System design for cooperative control of a microactuator array.
IEEE Trans. Ind. Electron., 1995

Control of a micro tunneling unit under atomic force.
Proceedings of IEEE/RSJ International Conference on Intelligent Robots and Systems, 1995

1993
Application of Micromechatronics.
J. Robotics Mechatronics, 1993

A proposal for a conveyance system with autonomous decentralized micro modules.
Proceedings of the International Symposium on Autonomous Decentralized Systems, 1993

A Vacuum-compatible X-Y Microactuator using the Levitational Effect of a Superconductor.
Proceedings of the Robotics, Mechatronics and Manufacturing Systems, 1993

1990
Development of micro actuator using shape memory alloy thin film.
Proceedings of the IEEE International Workshop on Intelligent Robots and Systems '90, 1990

1989
Studies of micro actuators in Japan.
Proceedings of the 1989 IEEE International Conference on Robotics and Automation, 1989

1988
Servo Controller For Electrostatic Micro-actuators.
Proceedings of the IEEE International Workshop on Intelligent Robots and Systems '88, Proceedings. IROS 1988, Tokyo, Japan, October 31, 1988

An Integrated Micro Servosystem.
Proceedings of the IEEE International Workshop on Intelligent Robots and Systems '88, Proceedings. IROS 1988, Tokyo, Japan, October 31, 1988


  Loading...