Giovanni Bucci

According to our database1, Giovanni Bucci authored at least 36 papers between 1996 and 2021.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Other 

Links

Online presence:

On csauthors.net:

Bibliography

2021
A New Convolutional Neural Network-Based System for NILM Applications.
IEEE Trans. Instrum. Meas., 2021

A Non-Intrusive Load Identification System Based on Frequency Response Analysis.
Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2021

Multi-State Appliances Identification through a NILM System Based on Convolutional Neural Network.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2021

2020
Apparatus for Online Continuous Diagnosis of Induction Motors Based on the SFRA Technique.
IEEE Trans. Instrum. Meas., 2020

An IoT condition monitoring system for resilience based on spectral analysis of vibration.
Proceedings of the 2020 IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2020

Load Identification System for Residential Applications Based on the NILM Technique.
Proceedings of the 2020 IEEE International Instrumentation and Measurement Technology Conference, 2020

2019
A Pulse Oximetry IoT System Based on Powerline Technology.
Proceedings of the 2nd Workshop on Metrology for Industry 4.0 and IoT MetroInd4.0&IoT 2019, 2019

Challenge and future trends of distributed measurement systems based on Blockchain technology in the European context.
Proceedings of the 10th IEEE International Workshop on Applied Measurements for Power Systems, 2019

2017
Erratum to "Uncertainty Issues in Direct and Indirect Efficiency Determination for Three-Phase Induction Motors: Remarks About the IEC 60034-2-1 Standard".
IEEE Trans. Instrum. Meas., 2017

Domestic electrical standard system for power line communication tests.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017

An automatic system for testing of low-cost electric energy meters under distorted conditions.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017

2016
Uncertainty Issues in Direct and Indirect Efficiency Determination for Three-Phase Induction Motors: Remarks About the IEC 60034-2-1 Standard.
IEEE Trans. Instrum. Meas., 2016

2015
A low-cost power transducer for transient currents.
Proceedings of the 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2015

2014
Measuring System for Microelectric Power.
IEEE Trans. Instrum. Meas., 2014

A measurement technique for quality control of windings for cast resin power transformers.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2014

2013
A Low-Cost Contactless Transducer for the Measurement of DC Currents Up to 13 kA for the Industry of Anodized Aluminum.
IEEE Trans. Instrum. Meas., 2013

Embedded Power and Energy Measurement System Based on an Analog Multiplier.
IEEE Trans. Instrum. Meas., 2013

Overcoming the barriers: a qualitative study of simulation adoption in the NHS.
J. Oper. Res. Soc., 2013

Low cost smart power metering.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

A low-cost ultrasonic wind speed and direction measurement system.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

2012
The Measurement of Surface Electromyographic Signal in Rest Position for the Correct Prescription of Eyeglasses.
IEEE Trans. Instrum. Meas., 2012

2010
A Plug-n-Play wireless sensor network based on Web service for monitoring climatic parameters.
Proceedings of the IEEE International Conference on Virtual Environments, 2010

2008
A New Flexible Optical Fiber Goniometer for Dynamic Angular Measurements: Application to Human Joint Movement Monitoring.
IEEE Trans. Instrum. Meas., 2008

Analysis of Turbulent Flow Speed Profiles in Pressure Pipes Using the Dissimilar Similitude Technique Applied to an Electrolytic Tank: Implementation and Experimental Characterization.
IEEE Trans. Instrum. Meas., 2008

A Digital Instrument for Light Flicker Effect Evaluation.
IEEE Trans. Instrum. Meas., 2008

The Performance Evaluation of IEC Flicker Meters in Realistic Conditions.
IEEE Trans. Instrum. Meas., 2008

2007
A distributed measurement system based on Peer-To-Peer architecture for River Monitoring.
Proceedings of the IEEE International Conference on Virtual Environments, 2007

2005
A low cost embedded Web service for measurements on power system.
Proceedings of the IEEE International Conference on Virtual Environments, 2005

2003
A distributed measurement architecture for industrial applications.
IEEE Trans. Instrum. Meas., 2003

Digital measurement station for power quality analysis in distributed environments.
IEEE Trans. Instrum. Meas., 2003

2000
A novel technique for testing pulsed RF MSK data communication devices.
IEEE Trans. Instrum. Meas., 2000

A multi-DSP based instrument on a VXI C-size module for real-time measurements.
IEEE Trans. Instrum. Meas., 2000

New ADC with piecewise linear characteristic: case study-implementation of a smart humidity sensor.
IEEE Trans. Instrum. Meas., 2000

1999
On-line digital measurement for the quality analysis of power systems under nonsinusoidal conditions.
IEEE Trans. Instrum. Meas., 1999

1998
Measurement system for a preliminary characterization of flash memory cells for multilevel applications.
IEEE Trans. Instrum. Meas., 1998

1996
The implementation of a high-speed data acquisition system for a DSP-based instrument operating in real-time.
Proceedings of the 8th European Signal Processing Conference, 1996


  Loading...