Julio E. Normey-Rico

According to our database1, Julio E. Normey-Rico authored at least 27 papers between 1999 and 2017.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Other 

Links

On csauthors.net:

Bibliography

2017
Event-Based GPC for Multivariable Processes: A Practical Approach With Sensor Deadband.
IEEE Trans. Contr. Sys. Techn., 2017

2016
Smith predictor with inverted decoupling for square multivariable time delay systems.
Int. J. Systems Science, 2016

Binary search algorithm for mixed integer optimization: Application to energy management in a microgrid.
Proceedings of the 2016 European Control Conference, 2016

Model predictive control of a tilt-rotor UAV for load transportation.
Proceedings of the 2016 European Control Conference, 2016

Multivariable GPC for processes with multiple time delays: Implementation issues.
Proceedings of the 21st IEEE International Conference on Emerging Technologies and Factory Automation, 2016

Robust delay compensation for MPC for systems with input nonlinearities and multiple dead times.
Proceedings of the 2016 IEEE Conference on Control Applications, 2016

Tuning methodology for industrial predictive controllers applied to Natural Gas Processing Unit.
Proceedings of the 2016 IEEE Conference on Control Applications, 2016

2015
Event-based GPC for multivariable processes.
Proceedings of the International Conference on Event-based Control, 2015

A robust predictor for nonlinear systems with dead time.
Proceedings of the 54th IEEE Conference on Decision and Control, 2015

2014
Event-based predictive control of pH in tubular photobioreactors.
Computers & Chemical Engineering, 2014

On the prediction error of dead-time compensation control for constrained nonlinear systems.
Proceedings of the European Control Conference, 2014

2013
A multivariable nonlinear MPC control strategy for thermal comfort and indoor-air quality.
Proceedings of the IECON 2013, 2013

Distributed model predictive control for energy distribution.
Proceedings of the European Control Conference, 2013

A flexible low cost embedded system for Model Predictive Control of industrial processes.
Proceedings of the European Control Conference, 2013

2012
A practical approach for Generalized Predictive Control within an event-based framework.
Computers & Chemical Engineering, 2012

Unified approach for minimal output dead time compensation in MIMO non-square processes.
Proceedings of the 51th IEEE Conference on Decision and Control, 2012

2011
A robust filter and controller design for NCS with uncertainties and data dropouts.
Proceedings of the 9th IEEE International Conference on Control and Automation, 2011

Robust design of dead-time compensator controllers for constrained non-linear systems.
Proceedings of the 50th IEEE Conference on Decision and Control and European Control Conference, 2011

2010
Robust Nonlinear Predictive Control Applied to a Solar Collector Field in a Solar Desalination Plant.
IEEE Trans. Contr. Sys. Techn., 2010

2009
A Predictive Controller for Autonomous Vehicle Path Tracking.
IEEE Trans. Intelligent Transportation Systems, 2009

Predictive temperature control of solar collectors in a desalination plant.
Proceedings of the European Control Conference, 2009

Dealing with measurement noise in integrative dead-time processes.
Proceedings of the European Control Conference, 2009

2008
Robust Predictive Control Strategy Applied for Propofol Dosing Using BIS as a Controlled Variable During Anesthesia.
IEEE Trans. Biomed. Engineering, 2008

Distributed continuous process simulation: An industrial case study.
Computers & Chemical Engineering, 2008

2005
OPC based distributed real time simulation of complex continuous processes.
Simulation Modelling Practice and Theory, 2005

2002
A unified approach to design dead-time compensators for stable and integrative processes with dead-time.
IEEE Trans. Automat. Contr., 2002

1999
Robust tuning of dead-time compensators for processes with an integrator and long dead-time.
IEEE Trans. Automat. Contr., 1999


  Loading...