Kyung Chang Lee

According to our database1, Kyung Chang Lee authored at least 23 papers between 2001 and 2015.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of four.



In proceedings 
PhD thesis 




Performance Evaluation of Node-mapping-based Flexray-CAN Gateway for in-vehicle Networking System.
Intelligent Automation & Soft Computing, 2015

Estimation of metabolic rate for heart rate-based self-adaptive home appliance.
Proceedings of the IEEE 3rd Global Conference on Consumer Electronics, 2014

Automatic FIBEX generation from CANdb for FlexRay network.
Proceedings of the XXIV International Symposium on Information, 2013

PMV calculation and intelligent control algorithm for location-based human adaptive air-conditioner.
Proceedings of the IEEE 2nd Global Conference on Consumer Electronics, 2013

Experimental Performance Evaluation of Smoothing Predictive Redundancy Using Embedded Microcontroller Unit.
IEEE Trans. Industrial Electronics, 2011

A fuzzy predictive redundancy system for fault-tolerance of x-by-wire systems.
Microprocessors and Microsystems - Embedded Hardware Design, 2011

Kalman Predictive Redundancy System for Fault Tolerance of Safety-critical Systems.
IEEE Trans. Industrial Informatics, 2010

Resident Location-Recognition Algorithm Using a Bayesian Classifier in the PIR Sensor-Based Indoor Location-Aware System.
IEEE Trans. Systems, Man, and Cybernetics, Part C, 2009

Performance evaluation of MAC layer of LnCP and LonWorks protocol as home networking system.
Computer Standards & Interfaces, 2009

NDIS-based virtual polling algorithm for IEEE 802.11b for guaranteeing the real-time requirements.
Computer Standards & Interfaces, 2007

Worst Case Communication Delay of Real-Time Industrial Switched Ethernet With Multiple Levels.
IEEE Trans. Industrial Electronics, 2006

A pyroelectric infrared sensor-based indoor location-aware system for the smart home.
IEEE Trans. Consumer Electronics, 2006

QoS-based remote control of networked control systems via Profibus token passing protocol.
IEEE Trans. Industrial Informatics, 2005

IEEE-1451-based smart module for in-vehicle networking systems of intelligent vehicles.
IEEE Trans. Industrial Electronics, 2004

Timer selection for satisfying the maximum allowable delay using performance model of profibus token passing protocol.
IEEE Trans. Industrial Electronics, 2004

Network-based fire-detection system via controller area network for smart home automation.
IEEE Trans. Consumer Electronics, 2004

Implementation and PID tuning of network-based control systems via Profibus polling network.
Computer Standards & Interfaces, 2004

Remote fuzzy logic control of networked control system via Profibus-DP.
IEEE Trans. Industrial Electronics, 2003

Network configuration technique for home appliances based on LnCP.
IEEE Trans. Consumer Electronics, 2003

Development of performance model for calculation of communication delay in Profibus token passing protocol.
Computer Standards & Interfaces, 2003

Integration of mobile vehicles for automated material handling using Profibus and IEEE 802.11 networks.
IEEE Trans. Industrial Electronics, 2002

Intelligent performance management of networks for advanced manufacturing systems.
IEEE Trans. Industrial Electronics, 2001

On-line fuzzy performance management of Profibus networks.
Computers in Industry, 2001