Lee Empringham

According to our database1, Lee Empringham authored at least 22 papers between 2002 and 2018.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

On csauthors.net:

Bibliography

2018
A Design Guide of Direct Matrix Converter Open Circuit Online Fault Diagnosis in Industrial Applications.
Proceedings of the IECON 2018, 2018

Common Mode Voltage Mitigation in Industrial Three-Phase Inverters Based on Model Predictive Control.
Proceedings of the IEEE Industry Applications Society Annual Meeting, 2018

2016
A low capacitance single-phase AC-DC converter with inherent power ripple decoupling.
Proceedings of the IECON 2016, 2016

2015
A Four-Leg Matrix Converter Ground Power Unit With Repetitive Voltage Control.
IEEE Trans. Ind. Electron., 2015

2014
Reduction of Output Common Mode Voltage Using a Novel SVM Implementation in Matrix Converters for Improved Motor Lifetime.
IEEE Trans. Ind. Electron., 2014

Enabling technologies for a fault tolerant linear actuation drive.
Proceedings of the IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society, Dallas, TX, USA, October 29, 2014

2013
A Comparative Assessment of Model Predictive Current Control and Space Vector Modulation in a Direct Matrix Converter.
IEEE Trans. Ind. Electron., 2013

Technological Issues and Industrial Application of Matrix Converters: A Review.
IEEE Trans. Ind. Electron., 2013

2012
Capacitor Clamped Multilevel Matrix Converter Space Vector Modulation.
IEEE Trans. Ind. Electron., 2012

Fault-Tolerant Matrix Converter Motor Drives With Fault Detection of Open Switch Faults.
IEEE Trans. Ind. Electron., 2012

HF Induction Motor Modeling Using Automated Experimental Impedance Measurement Matching.
IEEE Trans. Ind. Electron., 2012

Challenges of high speed digital control in a SiC JFET matrix converter implementation.
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012

Fault location in matrix converters using low frequency modulation matrices for SVM based modulation techniques.
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012

2011
Implementation and Control of a Hybrid Multilevel Converter With Floating DC Links for Current Waveform Improvement.
IEEE Trans. Ind. Electron., 2011

2010
Multiphase Power Converter Drive for Fault-Tolerant Machine Development in Aerospace Applications.
IEEE Trans. Ind. Electron., 2010

Control and Implementation of a Matrix-Converter-Based AC Ground Power-Supply Unit for Aircraft Servicing.
IEEE Trans. Ind. Electron., 2010

2009
Position Estimation of a Matrix-Converter-Fed AC PM Machine From Zero to High Speed Using PWM Excitation.
IEEE Trans. Ind. Electron., 2009

2008
Control Design of a Three-Phase Matrix-Converter-Based AC-AC Mobile Utility Power Supply.
IEEE Trans. Ind. Electron., 2008

2007
Large-Signal Model for the Stability Analysis of Matrix Converters.
IEEE Trans. Ind. Electron., 2007

Elimination of Waveform Distortions in Matrix Converters Using a New Dual Compensation Method.
IEEE Trans. Ind. Electron., 2007

2004
Enhancement of matrix converter output waveform quality using minimized commutation times.
IEEE Trans. Ind. Electron., 2004

2002
Matrix converters: a technology review.
IEEE Trans. Ind. Electron., 2002


  Loading...