Jon C. Clare

Orcid: 0000-0001-8243-4280

According to our database1, Jon C. Clare authored at least 62 papers between 1999 and 2023.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

Online presence:

On csauthors.net:

Bibliography

2023
Continuous Control Set Model Predictive Control of a Modular Multilevel Converter for Drive Applications.
IEEE Trans. Ind. Electron., September, 2023

Optimizing Wireless Power Transfer Efficiency in Cascaded H-Bridge Converter Through an Auxiliary Resonant Circuit Pole.
Proceedings of the 49th Annual Conference of the IEEE Industrial Electronics Society, 2023

2021
Research and Realization of High-Power Medium-Voltage Active Rectifier Concepts for Future Hybrid-Electric Aircraft Generation.
IEEE Trans. Ind. Electron., 2021

Experimental Validation of a Nested Control System to Balance the Cell Capacitor Voltages in Hybrid MMCs.
IEEE Access, 2021

Trapezoidal operation of modular multilevel DC-DC converter for HVDC interconnections.
Proceedings of the IECON 2021, 2021

2019
A Design Methodology of Multiresonant Controllers for High Performance 400 Hz Ground Power Units.
IEEE Trans. Ind. Electron., 2019

An Integrated Converter and Machine Control System for MMC-Based High-Power Drives.
IEEE Trans. Ind. Electron., 2019

Vector Control of a Modular Multilevel Matrix Converter Operating Over the Full Output-Frequency Range.
IEEE Trans. Ind. Electron., 2019

A Parallel Connected Unfolding Bridge (PCUB) Multilevel Converter for HVDC Applications.
Proceedings of the IECON 2019, 2019

2017
Arm-Balancing Control and Experimental Validation of a Grid-Connected MMC With Pulsed DC Load.
IEEE Trans. Ind. Electron., 2017

An Enhanced dq-Based Vector Control System for Modular Multilevel Converters Feeding Variable-Speed Drives.
IEEE Trans. Ind. Electron., 2017

Control of Wind Energy Conversion Systems Based on the Modular Multilevel Matrix Converter.
IEEE Trans. Ind. Electron., 2017

Guest Editorial Control and Grid Integration of MW-Range Wind and Solar Energy Conversion Systems.
IEEE Trans. Ind. Electron., 2017

A study on probability of distribution loads based on expectation maximization algorithm.
Proceedings of the IEEE Power & Energy Society Innovative Smart Grid Technologies Conference, 2017

2016
Open-End Winding Induction Machine Fed by a Dual-Output Indirect Matrix Converter.
IEEE Trans. Ind. Electron., 2016

Modulation strategies for an open-end winding induction machine fed by a two-output indirect matrix converter.
Math. Comput. Simul., 2016

Submodule power losses balancing algorithms for the modular multilevel converter.
Proceedings of the IECON 2016, 2016

The series bridge converter (SBC): Design of a compact modular multilevel converter for grid applications.
Proceedings of the IECON 2016, 2016

2015
Self-Tuning Resonant Control of a Seven-Leg Back-to-Back Converter for Interfacing Variable-Speed Generators to Four-Wire Loads.
IEEE Trans. Ind. Electron., 2015

Resonant control system for a 7-leg back-to-back converter for interfacing variable speed generators to 4-wire loads.
Proceedings of the 24th IEEE International Symposium on Industrial Electronics, 2015

Control of a grid connected modular multilevel converter under pulsed DC load.
Proceedings of the IECON 2015, 2015

2014
Active DC Voltage Balancing PWM Technique for High-Power Cascaded Multilevel Converters.
IEEE Trans. Ind. Electron., 2014

Modulated Model Predictive Control for a Seven-Level Cascaded H-Bridge Back-to-Back Converter.
IEEE Trans. Ind. Electron., 2014

2013
A Cascade Multilevel Frequency Changing Converter for High-Power Applications.
IEEE Trans. Ind. Electron., 2013

Technological Issues and Industrial Application of Matrix Converters: A Review.
IEEE Trans. Ind. Electron., 2013

Switching strategies for an indirect matrix converter fed open-end load.
Proceedings of the 22nd IEEE International Symposium on Industrial Electronics, 2013

A new predictive control method for cascaded multilevel converters with intrinsic modulation scheme.
Proceedings of the IECON 2013, 2013

2012
Assessing the Benefits of Hybrid Cycloconverters.
IEEE Trans. Ind. Electron., 2012

Automated Optimal Design of Input Filters for Direct AC/AC Matrix Converters.
IEEE Trans. Ind. Electron., 2012

Capacitor Clamped Multilevel Matrix Converter Space Vector Modulation.
IEEE Trans. Ind. Electron., 2012

HF Induction Motor Modeling Using Automated Experimental Impedance Measurement Matching.
IEEE Trans. Ind. Electron., 2012

Analysis and Experimental Validation of Control Systems for Four-Leg Matrix Converter Applications.
IEEE Trans. Ind. Electron., 2012

4-leg matrix converter interface for a variable-speed diesel generation system.
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012

Fault location in matrix converters using low frequency modulation matrices for SVM based modulation techniques.
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012

2011
Advanced Power Electronic Conversion and Control System for Universal and Flexible Power Management.
IEEE Trans. Smart Grid, 2011

Control of a Doubly Fed Induction Generator via an Indirect Matrix Converter With Changing DC Voltage.
IEEE Trans. Ind. Electron., 2011

Experimental Validation of a Space-Vector-Modulation Algorithm for Four-Leg Matrix Converters.
IEEE Trans. Ind. Electron., 2011

2010
Control technique for power device electro-thermal stress minimisation in non-linear load variable-frequency resonant power converters.
Microelectron. Reliab., 2010

2009
Optimized Commissioning Method for Enhanced Vector Control of High-Power Induction Motor Drives.
IEEE Trans. Ind. Electron., 2009

A Topology for Multiple Generation System With Doubly Fed Induction Machines and Indirect Matrix Converter.
IEEE Trans. Ind. Electron., 2009

Control of the Reactive Power Supplied by a WECS Based on an Induction Generator Fed by a Matrix Converter.
IEEE Trans. Ind. Electron., 2009

Stability Analysis of a Wind Energy Conversion System Based on a Doubly Fed Induction Generator Fed by a Matrix Converter.
IEEE Trans. Ind. Electron., 2009

Reliability considerations in pulsed power resonant conversion.
Microelectron. Reliab., 2009

2008
Control Design of a Three-Phase Matrix-Converter-Based AC-AC Mobile Utility Power Supply.
IEEE Trans. Ind. Electron., 2008

Predictive Current Control for Multilevel Active Rectifiers With Reduced Switching Frequency.
IEEE Trans. Ind. Electron., 2008

Harmonic Loss Due to Operation of Induction Machines From Matrix Converters.
IEEE Trans. Ind. Electron., 2008

Sensorless Control of Doubly-Fed Induction Generators Using a Rotor-Current-Based MRAS Observer.
IEEE Trans. Ind. Electron., 2008

Development of a Predictive Controller for Use on a Direct Converter for High-Energy Physics Applications.
IEEE Trans. Ind. Electron., 2008

2007
A Complete Harmonic Elimination Approach to DC Link Voltage Balancing for a Cascaded Multilevel Rectifier.
IEEE Trans. Ind. Electron., 2007

Large-Signal Model for the Stability Analysis of Matrix Converters.
IEEE Trans. Ind. Electron., 2007

Elimination of Waveform Distortions in Matrix Converters Using a New Dual Compensation Method.
IEEE Trans. Ind. Electron., 2007

Performance Assessment of SVM Modulation Techniques for Losses Reduction in Induction Motor Drives.
Proceedings of the Conference Record of the 2007 IEEE Industry Applications Conference Forty-Second IAS Annual Meeting, 2007

2006
Power Smoothing Using a Flywheel Driven by a Switched Reluctance Machine.
IEEE Trans. Ind. Electron., 2006

Vector Control of Front-End Converters for Variable-Speed Wind-Diesel Systems.
IEEE Trans. Ind. Electron., 2006

Use of a matrix converter to enhance the sensorless control of a surface-mount permanent-magnet AC motor at zero and low frequency.
IEEE Trans. Ind. Electron., 2006

2004
Enhancement of matrix converter output waveform quality using minimized commutation times.
IEEE Trans. Ind. Electron., 2004

Control strategies for power smoothing using a flywheel driven by a sensorless vector-controlled induction machine operating in a wide speed range.
IEEE Trans. Ind. Electron., 2004

2002
Matrix converters: a technology review.
IEEE Trans. Ind. Electron., 2002

Gate drive level intelligence and current sensing for matrix converter current commutation.
IEEE Trans. Ind. Electron., 2002

2001
Control strategies for enhanced power smoothing in wind energy systems using a flywheel driven by a vector-controlled induction machine.
IEEE Trans. Ind. Electron., 2001

2000
A practical approach to the design of robust speed controllers for machine drives.
IEEE Trans. Ind. Electron., 2000

1999
Dynamic emulation of mechanical loads using a vector-controlled induction motor-generator set.
IEEE Trans. Ind. Electron., 1999


  Loading...