Gregory M. Asher

Affiliations:
  • University of Nottingham, UK


According to our database1, Gregory M. Asher authored at least 33 papers between 1997 and 2017.

Collaborative distances:

Awards

IEEE Fellow

IEEE Fellow 2007, "For contributions to control of AC motor drives".

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

Online presence:

On csauthors.net:

Bibliography

2017
Control Design and Voltage Stability Analysis of a Droop-Controlled Electrical Power System for More Electric Aircraft.
IEEE Trans. Ind. Electron., 2017

2014
An improved voltage compensation method for droop-controlled system in DC microgrid.
Proceedings of the IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society, Dallas, TX, USA, October 29, 2014

2013
Overview of Control Systems for the Operation of DFIGs in Wind Energy Applications.
IEEE Trans. Ind. Electron., 2013

Overview of control systems for the operation of DFIGs in wind energy applications.
Proceedings of the IECON 2013, 2013

2012
Novel Integration of Wind Generator-Energy Storage Systems Within Microgrids.
IEEE Trans. Smart Grid, 2012

Modeling of active front-end rectifiers using dynamic phasors.
Proceedings of the 21st IEEE International Symposium on Industrial Electronics, 2012

2010
Analysis and Compensation of Inverter Nonlinearity Effect on a Sensorless PMSM Drive at Very Low and Zero Speed Operation.
IEEE Trans. Ind. Electron., 2010

Improved Waveform Quality in the Direct Torque Control of Matrix-Converter-Fed PMSM Drives.
IEEE Trans. Ind. Electron., 2010

Calorimeters and Techniques Used for Power Loss Measurements in Electrical Machines.
IEEE Instrum. Meas. Mag., 2010

2009
Position Estimation of a Matrix-Converter-Fed AC PM Machine From Zero to High Speed Using PWM Excitation.
IEEE Trans. Ind. Electron., 2009

Control of the Reactive Power Supplied by a WECS Based on an Induction Generator Fed by a Matrix Converter.
IEEE Trans. Ind. Electron., 2009

Stability Analysis of a Wind Energy Conversion System Based on a Doubly Fed Induction Generator Fed by a Matrix Converter.
IEEE Trans. Ind. Electron., 2009

2008
Sensorless Control of Doubly-Fed Induction Generators Using a Rotor-Current-Based MRAS Observer.
IEEE Trans. Ind. Electron., 2008

Sensorless Control of Induction Machines by Using PWM Harmonics for Rotor Bar Slotting Detection.
Proceedings of the Industry Applications Society Annual Meeting, 2008

2007
Sensorless Position and Speed Control of Induction Motors Using High-Frequency Injection and Without Offline Precommissioning.
IEEE Trans. Ind. Electron., 2007

Elimination of Waveform Distortions in Matrix Converters Using a New Dual Compensation Method.
IEEE Trans. Ind. Electron., 2007

Sensorless Control of Surface Mounted Permanent Magnetic Machine Using the Standard Space Vector PWM.
Proceedings of the Conference Record of the 2007 IEEE Industry Applications Conference Forty-Second IAS Annual Meeting, 2007

2006
Sensorless control of induction Machines at zero and low frequency using zero sequence currents.
IEEE Trans. Ind. Electron., 2006

Hybrid rotor position observer for wide speed-range sensorless PM motor drives including zero speed.
IEEE Trans. Ind. Electron., 2006

Comparative analysis of experimental performance and stability of sensorless induction motor drives.
IEEE Trans. Ind. Electron., 2006

Performance of HF signal injection techniques for zero-low-frequency vector control of induction Machines under sensorless conditions.
IEEE Trans. Ind. Electron., 2006

Power Smoothing Using a Flywheel Driven by a Switched Reluctance Machine.
IEEE Trans. Ind. Electron., 2006

Vector Control of Front-End Converters for Variable-Speed Wind-Diesel Systems.
IEEE Trans. Ind. Electron., 2006

Use of a matrix converter to enhance the sensorless control of a surface-mount permanent-magnet AC motor at zero and low frequency.
IEEE Trans. Ind. Electron., 2006

Control of an AC Dynamometer for Dynamic Emulation of Mechanical Loads With Stiff and Flexible Shafts.
IEEE Trans. Ind. Electron., 2006

2004
Control strategies for power smoothing using a flywheel driven by a sensorless vector-controlled induction machine operating in a wide speed range.
IEEE Trans. Ind. Electron., 2004

2001
Control strategies for enhanced power smoothing in wind energy systems using a flywheel driven by a vector-controlled induction machine.
IEEE Trans. Ind. Electron., 2001

2000
Suppression of saturation saliency effects for the sensorless position control of induction motor drives under loaded conditions.
IEEE Trans. Ind. Electron., 2000

A practical approach to the design of robust speed controllers for machine drives.
IEEE Trans. Ind. Electron., 2000

1999
Dynamic emulation of mechanical loads using a vector-controlled induction motor-generator set.
IEEE Trans. Ind. Electron., 1999

1997
Bond Graphs II: Causality and Singularity.
Discret. Appl. Math., 1997

Bond Graphs I: Acausal Equivalence.
Discret. Appl. Math., 1997

Bond Graphs III: Bond Graphs and Electrical Networks.
Discret. Appl. Math., 1997


  Loading...