Marco Ghidelli

According to our database, Marco Ghidelli authored at least 7 papers between 2021 and 2024.

Collaborative distances:

• Dijkstra number of five.
• Erdős number of five.

2024

Validation of Contact Measurement System for Wheelchair Tennis Propulsion Using Marker-Less Vision System.

Enrico Ferlinghetti, Inge Salzmann, Marco Ghidelli, Thomas Rietveld, Riemer J. K. Vegter, Matteo Lancini

IEEE Trans. Instrum. Meas., 2024

2023

Validation of Estimators for Weight-Bearing and Shoulder Joint Loads Using Instrumented Crutches.

Marco Ghidelli, Cristina Nuzzi, Francesco Crenna, Matteo Lancini

Sensors, July, 2023

Body measurement estimations using 3D scanner for individuals with severe motor impairments.

Cristina Nuzzi, Marco Ghidelli, Alessandro Luchetti, Matteo Zanetti, Francesco Crenna, Matteo Lancini

Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2023

Algorithm Development for Contact Identification during Wheelchair Tennis Propulsion using Marker-less Vision System.

Enrico Ferlinghetti, Inge Salzmann, Marco Ghidelli, Thomas Rietveld, Riemer J. K. Vegter, Matteo Lancini

Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2023

2022

Validation of a ROS-Based Synchronization System for Biomechanics Gait Labs.

Marco Ghidelli, Stefano Massardi, Luca Foletti, Alberto Cantón González, Matteo Lancini

Proceedings of the IEEE International Symposium on Measurements & Networking, 2022

2021

Cobot User Frame Calibration: Evaluation and Comparison between Positioning Repeatability Performances Achieved by Traditional and Vision-Based Methods.

Roberto Pagani, Cristina Nuzzi, Marco Ghidelli, Alberto Borboni, Matteo Lancini, Giovanni Legnani

Robotics, 2021

Instrumented crutches with audio feedback to alter assisted gait.

Marco Ghidelli, Pietro Padovani, David Pinto-Fernandez, Simone Pasinetti, Antonio J. del Ama, Diego Torricelli, Matteo Lancini

Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2021