Seungmin Jung

Orcid: 0000-0002-4339-4885

According to our database1, Seungmin Jung authored at least 27 papers between 2008 and 2023.

Collaborative distances:
  • Dijkstra number2 of four.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

On csauthors.net:

Bibliography

2023
Implementation of Novel GDI D-Flip-Flop for RTL Design.
J. Comput. Sci. Eng., December, 2023

A Study on the VLSI Implementation of Fingerprint Thinning Processors Using Hybrid GDI Technique.
J. Comput. Sci. Eng., March, 2023

2022
An EV-Based Wind Power Curtailment Scheme Utilizing the Power Sensitivity of the Distribution Network.
IEEE Access, 2022

2021
BCGAN: A CGAN-based over-sampling model using the boundary class for data balancing.
J. Supercomput., 2021

Sliding window-based LightGBM model for electric load forecasting using anomaly repair.
J. Supercomput., 2021

An Attention-Based Multilayer GRU Model for Multistep-Ahead Short-Term Load Forecasting.
Sensors, 2021

Analytical Approach for Fast Frequency Response Control of VSC HVDC.
IEEE Access, 2021

2020
Multistep-Ahead Solar Radiation Forecasting Scheme Based on the Light Gradient Boosting Machine: A Case Study of Jeju Island.
Remote. Sens., 2020

Image Processor and RISC MCU Embedded Single Chip Fingerprint Sensor.
J. Sens. Actuator Networks, 2020

VLSI Implementation of Algorithm for Performance Improvement of Minutiae Based Fingerprint Recognition System.
J. Comput. Sci. Eng., 2020

A Study on Sizing of Substation for PV With Optimized Operation of BESS.
IEEE Access, 2020

Recurrent Neural-Network-Based Maximum Frequency Deviation Prediction Using Probability Power Flow Dynamic Tool.
IEEE Access, 2020

2019
Probabilistic Power Flow Analysis of Bulk Power System for Practical Grid Planning Application.
IEEE Access, 2019

VSC HVDC Capacitance Estimation for Inertia Emulation Control in Jeju Island Power System.
Proceedings of the 28th IEEE International Symposium on Industrial Electronics, 2019

2018
Optimal Sizing and Operation of ESS at Renewable Energy Substation.
Proceedings of the TENCON 2018, 2018

2017
A robotic orthosis with a cable-differential mechanism.
Proceedings of the 2017 IEEE International Conference on Robotics and Automation, 2017

2016
A wearable robotic orthosis with a spring-assist actuator.
Proceedings of the 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 2016

2015
R-Mo: A new mobile robotic platform to reduce variations in height and pitch angle on rugged terrain.
Proceedings of the 2015 IEEE/RSJ International Conference on Intelligent Robots and Systems, 2015

2012
A Study of a High Performance Capacitive Sensing Scheme Using a Floating-Gate MOS Transistor.
J. Inform. and Commun. Convergence Engineering, 2012

Rocker-Pillar : Design of the rough terrain mobile robot platform with caterpillar tracks and rocker bogie mechanism.
Proceedings of the 2012 IEEE/RSJ International Conference on Intelligent Robots and Systems, 2012

2011
Design of Low Power Capacitive Sensing Circuit with a High Resolution in CMOS Technology.
J. Inform. and Commun. Convergence Engineering, 2011

2010
An ASIC Implementation of Fingerprint Thinning Algorithm.
J. Inform. and Commun. Convergence Engineering, 2010

Thinning Processor for 160 X 192 Pixel Array Fingerprint Recognition.
J. Inform. and Commun. Convergence Engineering, 2010

2009
A Robust Resistive Fingerprint Sensor.
J. Inform. and Commun. Convergence Engineering, 2009

2008
Design of Circuit for a Fingerprint Sensor Based on Ridge Resistivity.
J. Inform. and Commun. Convergence Engineering, 2008

Design of Connectivity Test Circuit for a Direct Printing Image Drum.
J. Inform. and Commun. Convergence Engineering, 2008

An energy-efficient data cache with byte-repeat pattern encoding.
IEICE Electron. Express, 2008


  Loading...