Silvio Simani

Orcid: 0000-0003-1815-2478

According to our database1, Silvio Simani authored at least 67 papers between 1999 and 2024.

Collaborative distances:
  • Dijkstra number2 of four.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

On csauthors.net:

Bibliography

2024
Hybrid robust fault detection and isolation of satellite reaction wheel actuators.
J. Control. Decis., 2024

2023
Neural Network Observer-Based Prescribed-Time Fault-Tolerant Tracking Control for Heterogeneous Multiagent Systems With a Leader of Unknown Disturbances.
IEEE Trans. Aerosp. Electron. Syst., December, 2023

2022
Artificial Intelligence Tools for Actuator Fault Diagnosis of an Unmanned Underwater Vehicle.
Proceedings of the Intelligent Computing, 2022

Robust Control Design Solution for a Permanent Magnet Synchronous Generator of a Wind Turbine Model.
Proceedings of the Intelligent Systems and Applications, 2022

2021
Decoupling Adaptive Sliding Mode Observer Design for Wind Turbines Subject to Simultaneous Faults in Sensors and Actuators.
IEEE CAA J. Autom. Sinica, 2021

Design and Validation of a Fault Tolerant Fuzzy Control for a Wind Park High-Fidelity Simulator.
Proceedings of the 5th International Conference on Control and Fault-Tolerant Systems, 2021

Simulation and Experimental Validation of Fuzzy Control Techniques for Wind Turbine System and Hydroelectric Plant.
Proceedings of the 5th International Conference on Control and Fault-Tolerant Systems, 2021

Validation of Fault Diagnosis Techniques Based on Artificial Intelligence Tools for a Wind Turbine Benchmark.
Proceedings of the 5th International Conference on Control and Fault-Tolerant Systems, 2021

Data-Driven Fault Detection and Isolation of the Actuators of an Autonomous Underwater Vehicle.
Proceedings of the 5th International Conference on Control and Fault-Tolerant Systems, 2021

Application of Data-Driven Fault Diagnosis Design Techniques to a Wind Turbine Test-Rig.
Proceedings of the Intelligent Computing, 2021

2020
LEO satellite active FTC with aerodynamic disturbance decoupled fault diagnosis.
Eur. J. Control, 2020

Fault Diagnosis and Fault-Tolerant Control for Avionic Systems.
Proceedings of the Intelligent Systems and Applications, 2020

2019
Fuzzy Control Techniques for Energy Conversion Systems: Wind Turbine and Hydroelectric Plants.
Proceedings of the 4th Conference on Control and Fault Tolerant Systems, 2019

Fuzzy Control Techniques for Energy Conversion Systems.
Proceedings of the Intelligent Systems and Applications, 2019

Fuzzy Control Techniques Applied to Wind Turbine Systems and Hydroelectric Plants.
Proceedings of the 2019 IEEE International Conference on Fuzzy Systems, 2019

2018
Data-Driven Techniques for the Fault Diagnosis of a Wind Turbine Benchmark.
Int. J. Appl. Math. Comput. Sci., 2018

Satellite Attitude Fault Tolerant Control with Aerodynamic Disturbance Decoupling.
Proceedings of the 16th European Control Conference, 2018

2017
Avionic Air Data Sensors Fault Detection and Isolation by means of Singular Perturbation and Geometric Approach.
Sensors, 2017

2015
Fault Diagnosis of a Wind Turbine Benchmark via Identified Fuzzy Models.
IEEE Trans. Ind. Electron., 2015

Overview of modelling and control strategies for wind turbines and wave energy devices: Comparisons and contrasts.
Annu. Rev. Control., 2015

Special issue on wind turbines and wave energy devices.
Annu. Rev. Control., 2015

2014
NonLinear Fault Tolerant Flight Control for generic actuators fault models.
Proceedings of the American Control Conference, 2014

Fault tolerant control design for a wind farm benchmark via fuzzy modelling and identification.
Proceedings of the 2014 IEEE International Symposium on Intelligent Control, 2014

2013
Residual generator fuzzy identification for automotive diesel engine fault diagnosis.
Int. J. Appl. Math. Comput. Sci., 2013

Robust actuator fault diagnosis of a wind turbine benchmark model.
Proceedings of the 52nd IEEE Conference on Decision and Control, 2013

2012
Model-based robust fault detection and isolation of an industrial gas turbine prototype using soft computing techniques.
Neurocomputing, 2012

Application of a Data-Driven Fuzzy Control Design to a Wind Turbine Benchmark Model.
Adv. Fuzzy Syst., 2012

2011
Active Fault Tolerant Control of Nonlinear Systems: The Cart-Pole Example.
Int. J. Appl. Math. Comput. Sci., 2011

Model-based Fault Detection and Isolation Using Neural Networks: An Industrial Gas Turbine Case Study.
Proceedings of the 21st International Conference on Systems Engineering (ICSEng 2011), 2011

A new longitudinal flight path control with adaptive wind shear estimation and compensation.
Proceedings of the 50th IEEE Conference on Decision and Control and European Control Conference, 2011

2010
A nonlinear guidance and active fault tolerant control system for a fixed wing Unmanned Aerial Vehicle.
Proceedings of the American Control Conference, 2010

2009
Fuzzy Modelling and Control of the Air System of a Diesel Engine.
Adv. Fuzzy Syst., 2009

Model-based fault diagnosis approaches with application to an industrial gas turbine simulator.
Proceedings of the 10th European Control Conference, 2009

2007
Design and performance evaluation of residual genertors for the FDI of an aircraft.
Int. J. Autom. Comput., 2007

Residual generator design for the FDI of linear multivariable sampled-data dynamic systems.
Proceedings of the 46th IEEE Conference on Decision and Control, 2007

PID controller design application based on a boiler process model identification.
Proceedings of the 46th IEEE Conference on Decision and Control, 2007

Residual Generator Design and Performance Evaluation for Aircraft Simulated Model FDI.
Proceedings of the IEEE International Conference on Control Applications, 2007

2005
Identification and fault diagnosis of a simulated model of an industrial gas turbine.
IEEE Trans. Ind. Informatics, 2005

Identification of residual generators for fault detection of linear dynamic models.
Proceedings of the 44th IEEE IEEE Conference on Decision and Control and 8th European Control Conference Control, 2005

Fuzzy Model Identification of a Sugar Cane Crushing Process for Fault Diagnosis Application.
Proceedings of the 44th IEEE IEEE Conference on Decision and Control and 8th European Control Conference Control, 2005

2004
Residual generator design for linear dynamic system fault detection.
Proceedings of the 43rd IEEE Conference on Decision and Control, 2004

Residual generator function design for actuator fault detection and isolation of a Piper PA30 aircraft.
Proceedings of the 43rd IEEE Conference on Decision and Control, 2004

Modelling and identification of residual generator functions for fault detection and isolation of a small aircraft.
Proceedings of the 43rd IEEE Conference on Decision and Control, 2004

Identification of a chemical process for fault detection application.
Proceedings of the 2004 American Control Conference, 2004

Identification techniques for chemical process fault diagnosis.
Proceedings of the 2004 American Control Conference, 2004

Hybrid model identification for fault diagnosis of non-linear dynamic processes.
Proceedings of the 2004 American Control Conference, 2004

2003
Coding approaches to fault tolerance in combinational and dynamic systems: Christoforos N. Hadjicostis; Kluwer Academic Publishers, Dordrecht, 2002, ISBN 0-7923-7624-2.
Autom., 2003

Residual generation and disturbance de-coupling for a chemical process.
Proceedings of the 7th European Control Conference, 2003

Fault diagnosis of non-linear dynamic processes using identified hybrid models.
Proceedings of the 42nd IEEE Conference on Decision and Control, 2003

Residual design for dynamic processes using decoupling technique.
Proceedings of the 42nd IEEE Conference on Decision and Control, 2003

Parameter Identification of Piecewise Affine Dynamic Models from Input-Output Data.
Proceedings of the IFAC Conference on Analysis and Design of Hybrid Systems, 2003

2002
Neural networks for fault diagnosis of industrial plants at different working points.
Proceedings of the 10th Eurorean Symposium on Artificial Neural Networks, 2002

Neural networks for fault diagnosis and identification of industrial processes.
Proceedings of the 10th Eurorean Symposium on Artificial Neural Networks, 2002

Fault diagnosis of a chemical process using identification techniques.
Proceedings of the 41st IEEE Conference on Decision and Control, 2002

2001
Fuzzy system identification and fault diagnosis of industrial processes.
Proceedings of the 6th European Control Conference, 2001

Actuator fault diagnosis in a continuous stirred tank reactor using identification techniques.
Proceedings of the 6th European Control Conference, 2001

Parameter identification for eigenstructure assignment in robust fault detection.
Proceedings of the 6th European Control Conference, 2001

Robust fault diagnosis in a chemical process using multiple-model approach.
Proceedings of the 40th IEEE Conference on Decision and Control, 2001

Robust fault diagnosis of dynamic processes using parametric identification with eigenstructure assignment approach.
Proceedings of the 40th IEEE Conference on Decision and Control, 2001

2000
Diagnosis techniques for sensor faults of industrial processes.
IEEE Trans. Control. Syst. Technol., 2000

High-speed DSP-based implementation of piecewise-affine and piecewise-quadratic fuzzy systems.
Signal Process., 2000

Fault diagnosis in power plant using neural networks.
Inf. Sci., 2000

Identification and fault diagnosis of an industrial gas turbine prototype model.
Proceedings of the 39th IEEE Conference on Decision and Control, 2000

Identification and fault diagnosis of nonlinear dynamic processes using hybrid models.
Proceedings of the 39th IEEE Conference on Decision and Control, 2000

Non-linear dynamic system modelling in noisy environment using multiple model approach.
Proceedings of the American Control Conference, 2000

1999
Parameter identification for piecewise-affine fuzzy models in noisy environment.
Int. J. Approx. Reason., 1999

Fault diagnosis in a power plant using artificial neural networks: Analysis and comparison.
Proceedings of the 5th European Control Conference, 1999


  Loading...