Stefano Vitturi

According to our database1, Stefano Vitturi authored at least 70 papers between 2001 and 2020.

Collaborative distances:

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Other 

Links

Homepage:

On csauthors.net:

Bibliography

2020
Time-Critical Wireless Networked Embedded Systems: Feasibility and Experimental Assessment.
IEEE Trans. Ind. Informatics, 2020

The Impact of Rate Adaptation Algorithms on Wi-Fi-Based Factory Automation Systems.
Sensors, 2020

Evaluation of LoRaWAN for Sensor Data Collection in an IIoT-based Additive Manufacturing Project.
Proceedings of the 2020 IEEE International Instrumentation and Measurement Technology Conference, 2020

Assessment of Different OPC UA Industrial IoT solutions for Distributed Measurement Applications.
Proceedings of the 2020 IEEE International Instrumentation and Measurement Technology Conference, 2020

An IIoT System to Monitor 3D-Printed Artifacts via LoRaWAN Embedded Sensors.
Proceedings of the 25th IEEE International Conference on Emerging Technologies and Factory Automation, 2020

Rate Adaptation by Reinforcement Learning for Wi-Fi Industrial Networks.
Proceedings of the 25th IEEE International Conference on Emerging Technologies and Factory Automation, 2020

A Profinet Simulator for the Digital Twin of Networked Electrical Drive Systems.
Proceedings of the 25th IEEE International Conference on Emerging Technologies and Factory Automation, 2020

2019
Industrial Communication Systems and Their Future Challenges: Next-Generation Ethernet, IIoT, and 5G.
Proc. IEEE, 2019

Real-Time Networks and Protocols for Factory Automation and Process Control Systems.
Proc. IEEE, 2019

Embedded systems for time-critical applications over Wi-Fi: design and experimental assessment.
Proceedings of the 17th IEEE International Conference on Industrial Informatics, 2019

The Fail Safe over EtherCAT (FSoE) protocol implemented on the IEEE 802.11 WLAN.
Proceedings of the 24th IEEE International Conference on Emerging Technologies and Factory Automation, 2019

Comparative assessment of different OPC UA open-source stacks for embedded systems.
Proceedings of the 24th IEEE International Conference on Emerging Technologies and Factory Automation, 2019

2018
On the Use of LoRaWAN for Indoor Industrial IoT Applications.
Wirel. Commun. Mob. Comput., 2018

RCFD: A Novel Channel Access Scheme for Full-Duplex Wireless Networks Based on Contention in Time and Frequency Domains.
IEEE Trans. Mob. Comput., 2018

A Calibrated Test-Set for Measurement of Access-Point Time Specifications in Hybrid Wired/Wireless Industrial Communication <sup>†</sup>.
Inf., 2018

An Innovative Algorithmic Safety Strategy for Networked Electrical Drive Systems.
Proceedings of the 16th IEEE International Conference on Industrial Informatics, 2018

Assessing the Impact of Full-Duplex Wireless in Real-Time Industrial Networks.
Proceedings of the IECON 2018, 2018

Characterization of electrical rotary distributors for real-time data communication.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2018

2017
A Dynamic Rate Selection Algorithm for IEEE 802.11 Industrial Wireless LAN.
IEEE Trans. Ind. Informatics, 2017

An Energy Efficient Ethernet Strategy Based on Traffic Prediction and Shaping.
IEEE Trans. Commun., 2017

A learning algorithm for rate selection in real-time wireless LANs.
Comput. Networks, 2017

Real-time wireless extensions of industrial ethernet networks.
Proceedings of the 15th IEEE International Conference on Industrial Informatics, 2017

IEEE 802.11n for Distributed Measurement Systems.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017

2016
Guest Editorial Special Section on Communication in Automation.
IEEE Trans. Ind. Informatics, 2016

On the Use of IEEE 802.11n for Industrial Communications.
IEEE Trans. Ind. Informatics, 2016

An innovative approach to rate adaptation in IEEE 802.11 real-time industrial networks.
Proceedings of the IEEE World Conference on Factory Communication Systems, 2016

Performance analysis of IEEE 802.11 Rate Selection for Industrial Networks.
Proceedings of the IECON 2016, 2016

Statistical QoS analysis of full duplex and half duplex heterogeneous cellular networks.
Proceedings of the 2016 IEEE International Conference on Communications, 2016

RCFD: A frequency-based channel access scheme for full-duplex wireless networks.
Proceedings of the 2016 IEEE International Conference on Communications, 2016

2015
Strategies and Services for Energy Efficiency in Real-Time Ethernet Networks.
IEEE Trans. Ind. Informatics, 2015

Energy Efficient Ethernet for Real-Time Industrial Networks.
IEEE Trans Autom. Sci. Eng., 2015

An Energy Efficient Ethernet Strategy Based on Traffic Prediction and Shaping.
CoRR, 2015

The IEEE 802.11n wireless LAN for real-time industrial communication.
Proceedings of the IEEE World Conference on Factory Communication Systems, 2015

Enhancing the real-time behavior of IEEE 802.11n.
Proceedings of the IEEE World Conference on Factory Communication Systems, 2015

Improved Rate Adaptation strategies for real-time industrial IEEE 802.11n WLANs.
Proceedings of the 20th IEEE Conference on Emerging Technologies & Factory Automation, 2015

2014
Performance assessment of an IEEE 802.11-based protocol for real-time communication in agriculture.
Proceedings of the 2014 IEEE Emerging Technology and Factory Automation, 2014

An energy efficient traffic shaping algorithm for Ethernet-based multimedia industrial traffic.
Proceedings of the 2014 IEEE Emerging Technology and Factory Automation, 2014

System-level performance of an automation solution based on industry standards.
Proceedings of the 2014 IEEE Emerging Technology and Factory Automation, 2014

2013
On the Rate Adaptation Techniques of IEEE 802.11 Networks for Industrial Applications.
IEEE Trans. Ind. Informatics, 2013

Performance analysis of IEEE 802.11g multi-rate support for industrial applications.
Proceedings of the IECON 2013, 2013

Estimation and analysis of communication service time in a real-time wireless industrial network.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

Energy Efficient Ethernet for the industrial communication scenario.
Proceedings of 2013 IEEE 18th Conference on Emerging Technologies & Factory Automation, 2013

2012
Tuning of IEEE 802.11 MAC for improving real-time in industrial wireless networks.
Proceedings of 2012 IEEE 17th International Conference on Emerging Technologies & Factory Automation, 2012

2011
Real-time Ethernet networks for motion control.
Comput. Stand. Interfaces, 2011

Experimental evaluation of the service time for industrial hybrid (wired/wireless) networks under non-ideal environmental conditions.
Proceedings of the IEEE 16th Conference on Emerging Technologies & Factory Automation, 2011

2010
Effects of elaboration delays on the polling time of IEEE 802.11 networks for industrial applications.
Proceedings of 15th IEEE International Conference on Emerging Technologies and Factory Automation, 2010

Theoretical and experimental evaluation of polling times for wireless industrial networks using commercially available components.
Proceedings of 15th IEEE International Conference on Emerging Technologies and Factory Automation, 2010

2009
Analysis of Ethernet Powerlink Wireless Extensions Based on the IEEE 802.11 WLAN.
IEEE Trans. Ind. Informatics, 2009

Performance analysis of Ethernet Powerlink networks for distributed control and automation systems.
Comput. Stand. Interfaces, 2009

Real Time Ethernet Networks Evaluation using Performance Indicators.
Proceedings of 12th IEEE International Conference on Emerging Technologies and Factory Automation, 2009

Hybrid Wired/Wireless Networks Real-Time Industrial Networks.
Proceedings of the Networked Embedded Systems - Volume 2 of the Embedded Systems Handbook, 2009

2008
Experimental Characterization of Wireless Sensor Networks for Industrial Applications.
IEEE Trans. Instrum. Meas., 2008

2007
Experimental Evaluation of an Industrial Application Layer Protocol Over Wireless Systems.
IEEE Trans. Ind. Informatics, 2007

Guest Editorial Special Section on Wireless Technologies in Factory and Industrial Automation - Part II.
IEEE Trans. Ind. Informatics, 2007

Guest Editorial: Special Section on Wireless Technologies in Factory and Industrial Automation, Part I.
IEEE Trans. Ind. Informatics, 2007

Real-Time Communication in IEEE 802.11 Networks: Timing Analysis and a Ring Management Scheme for the VTP-CSMA Architecture.
Proceedings of the 32nd Annual IEEE Conference on Local Computer Networks (LCN 2007), 2007

A simulation study of ethernet powerlink networks.
Proceedings of 12th IEEE International Conference on Emerging Technologies and Factory Automation, 2007

2006
On the use of wireless networks at low level of factory automation systems.
IEEE Trans. Ind. Informatics, 2006

Performance analysis of PROFINET networks.
Comput. Stand. Interfaces, 2006

Performance of an Application Layer Protocol for Wireless Industrial Communications.
Proceedings of 11th IEEE International Conference on Emerging Technologies and Factory Automation, 2006

2005
Introducing intelligent sensors in presses for plastic material injection.
IEEE Trans. Ind. Informatics, 2005

Advances in automotive digital communications.
Comput. Stand. Interfaces, 2005

A wireless extension of Profibus DP based on the Bluetooth radio system.
Ad Hoc Networks, 2005

2004
PC-based automation systems: an example of application for the real-time control of blowing machines.
Comput. Stand. Interfaces, 2004

On the effects of the acyclic traffic on Profibus DP networks.
Comput. Stand. Interfaces, 2004

Hybrid wired/wireless implementations of Profibus DP: a feasibility study based on Ethernet and Bluetooth.
Comput. Commun., 2004

2003
DP-Ethernet: the Profibus DP protocol implemented on Ethernet.
Comput. Commun., 2003

Performance evaluation of automation systems for the real time control of blowing machines.
Proceedings of 9th IEEE International Conference on Emerging Technologies and Factory Automation, 2003

2001
Integrating fieldbuses and factory intranets.
Int. J. Comput. Integr. Manuf., 2001

On the use of Ethernet at low level of factory communication systems.
Comput. Stand. Interfaces, 2001


  Loading...