Thomas G. Habetler

Orcid: 0000-0001-6598-2429

Affiliations:
  • Georgia Institute of Technology, Atlanta GA, USA


According to our database1, Thomas G. Habetler authored at least 47 papers between 2001 and 2023.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of four.

Awards

IEEE Fellow

IEEE Fellow 2002, "For contributions to electric motor control and condition monitoring.".

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

Online presence:

On csauthors.net:

Bibliography

2023
Solar Power Tower Drives: A Comprehensive Survey.
IEEE Access, 2023

2021
Rotor Thermal Monitoring Scheme for Direct-Torque-Controlled Interior Permanent Magnet Synchronous Machines via High-Frequency Rotating Flux or Torque Injection.
CoRR, 2021

2020
Experimental Analysis and Optimization of a Contactless Eddy-Current-Based Speed Sensor for Smooth Conductive Surfaces.
IEEE Trans. Ind. Electron., 2020

Few-Shot Bearing Anomaly Detection Based on Model-Agnostic Meta-Learning.
CoRR, 2020

Deep Learning Algorithms for Bearing Fault Diagnosticsx - A Comprehensive Review.
IEEE Access, 2020

2019
Semi-Supervised Learning of Bearing Anomaly Detection via Deep Variational Autoencoders.
CoRR, 2019

Visualization of Multi-Objective Switched Reluctance Machine Optimization at Multiple Operating Conditions with t-SNE.
CoRR, 2019

Machine Learning and Deep Learning Algorithms for Bearing Fault Diagnostics - A Comprehensive Review.
CoRR, 2019

Bus Admittance Matrix Estimation Using Phasor Measurements.
Proceedings of the IEEE Power & Energy Society Innovative Smart Grid Technologies Conference, 2019

A Decentralized Estimation of the Power System Bus Impedance Matrix Using the Jacobi Iterative Method.
Proceedings of the IEEE Power & Energy Society Innovative Smart Grid Technologies Conference, 2019

A Survey of Electric Drives for Solar Tracking Control of Concentrated Solar Power Heliostats.
Proceedings of the IECON 2019, 2019

2017
A transient model of interior permanent magnet machines under stator winding inter-turn short circuit faults.
Proceedings of the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, October 29, 2017

Constant volts per hertz control of ultra-high speed switched reluctance machines.
Proceedings of the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, October 29, 2017

2016
Electric Load Classification by Binary Voltage-Current Trajectory Mapping.
IEEE Trans. Smart Grid, 2016

2015
Feature Extraction for Load Identification Using Long-Term Operating Waveforms.
IEEE Trans. Smart Grid, 2015

2014
Random forest based adaptive non-intrusive load identification.
Proceedings of the 2014 International Joint Conference on Neural Networks, 2014

2013
Incorporating Non-Intrusive Load Monitoring Into Building Level Demand Response.
IEEE Trans. Smart Grid, 2013

Nonintrusive, Self-Organizing, and Probabilistic Classification and Identification of Plugged-In Electric Loads.
IEEE Trans. Smart Grid, 2013

Using Only the DC Current Information to Detect Stator Turn Faults in Automotive Claw-Pole Generators.
IEEE Trans. Ind. Electron., 2013

A study of designing a universal inductive charger for Electric Vehicles.
Proceedings of the IECON 2013, 2013

Utilizing building-level demand response in frequency regulation of actual microgrids.
Proceedings of the IECON 2013, 2013

Design considerations for non-intrusive load monitoring hardware platforms in smart building.
Proceedings of the 2013 IEEE Industry Applications Society Annual Meeting, 2013

2012
Front-End Electronic Circuit Topology Analysis for Model-Driven Classification and Monitoring of Appliance Loads in Smart Buildings.
IEEE Trans. Smart Grid, 2012

A survey on consumer electronic products in residential home for demand response.
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012

A novel isolated bidirectional DC-DC converter for ultra-capacitor application in hybrid and electric vehicles.
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012

Support vector machine based methods for non-intrusive identification of miscellaneous electric loads.
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012

2011
Magnetic Effects of DC Signal Injection on Induction Motors for Thermal Evaluation of Stator Windings.
IEEE Trans. Ind. Electron., 2011

An Impedance Identification Approach to Sensitive Detection and Location of Stator Turn-to-Turn Faults in a Closed-Loop Multiple-Motor Drive.
IEEE Trans. Ind. Electron., 2011

2010
Using PWM-Induced Transient Excitation and Advanced Signal Processing for Zero-Speed Sensorless Control of AC Machines.
IEEE Trans. Ind. Electron., 2010

A novel gate driving scheme for high power PWM and bypass switches.
IEICE Electron. Express, 2010

2009
Impaired-Cooling-Condition Detection Using DC-Signal Injection for Soft-Starter-Connected Induction Motors.
IEEE Trans. Ind. Electron., 2009

A Complex Space Vector Approach to Rotor Temperature Estimation for Line-Connected Induction Machines With Impaired Cooling.
IEEE Trans. Ind. Electron., 2009

Overhead conductor thermal dynamics identification by using Echo State Networks.
Proceedings of the International Joint Conference on Neural Networks, 2009

2008
Bearing Fault Detection Via Stator Current Noise Cancellation and Statistical Control.
IEEE Trans. Ind. Electron., 2008

A Remote and Sensorless Stator Winding Resistance Estimation Method for Thermal Protection of Soft-Starter-Connected Induction Machines.
IEEE Trans. Ind. Electron., 2008

A Survey on Testing and Monitoring Methods for Stator Insulation Systems of Low-Voltage Induction Machines Focusing on Turn Insulation Problems.
IEEE Trans. Ind. Electron., 2008

A Sensorless Rotor Temperature Estimator for Induction Machines Based on a Current Harmonic Spectral Estimation Scheme.
IEEE Trans. Ind. Electron., 2008

A Model Reduction Perspective on Thermal Models for Induction Machine Overload Relays.
IEEE Trans. Ind. Electron., 2008

Multi-objective design optimization of Surface Mount Permanent Magnet machine with particle swarm intelligence.
Proceedings of the 2008 IEEE Swarm Intelligence Symposium, 2008

A Remote and Sensorless Thermal Protection Scheme for Soft-Starter-Connected Induction Motors.
Proceedings of the Industry Applications Society Annual Meeting, 2008

2007
Analytic-Wavelet-Ridge-Based Detection of Dynamic Eccentricity in Brushless Direct Current (BLDC) Motors Functioning Under Dynamic Operating Conditions.
IEEE Trans. Ind. Electron., 2007

Simplified Control Structure for Current Control of Single Phase Rectifiers Using COT-ANN-PWM.
Proceedings of the International Joint Conference on Neural Networks, 2007

Autonomous Self Commissioning Method for Speed Sensorless Controlled Induction Machines.
Proceedings of the Conference Record of the 2007 IEEE Industry Applications Conference Forty-Second IAS Annual Meeting, 2007

Non-Intrusive Efficiency Determination of In-Service Induction Motors using Genetic Algorithm and Air-Gap Torque Methods.
Proceedings of the Conference Record of the 2007 IEEE Industry Applications Conference Forty-Second IAS Annual Meeting, 2007

Electrolytic Capacitor Failure Mechanism Due to Inrush Current.
Proceedings of the Conference Record of the 2007 IEEE Industry Applications Conference Forty-Second IAS Annual Meeting, 2007

2004
An amplitude Modulation detector for fault diagnosis in rolling element bearings.
IEEE Trans. Ind. Electron., 2004

2001
Power electronic converter and system control.
Proc. IEEE, 2001


  Loading...