Umile Giuseppe Longo

Orcid: 0000-0003-4063-9821

According to our database1, Umile Giuseppe Longo authored at least 28 papers between 2019 and 2026.

Collaborative distances:
  • Dijkstra number2 of four.
  • Erdős number3 of four.

Timeline

Legend:

Book  In proceedings  Article  PhD thesis  Dataset  Other 

Links

On csauthors.net:

Bibliography

2026
Performance Evaluation of Meta Quest 3 and Meta Quest Pro in Static and Dynamic Conditions for Shoulder Rehabilitation in Virtual Reality.
IEEE Access, 2026

2025
Conceptual Framework for Autonomous Coaching in Orthopaedic Rehabilitation with Socially Assistive Robots.
Proceedings of the Social Robotics + AI - 17th International Conference, 2025

5GVIREH: a 5G-enabled Virtual Reality based solution for telerehabilitation.
Proceedings of the 17th International Conference on Quality of Multimedia Experience, 2025

Impact of Marker-set and Joint Constraint on kinematic outcome in Patients with knee Osteoarthritis.
Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2025

Lower-Limb Kinematics Changes During a 20 km Time Trial of Experienced Master Cyclists.
Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2025

3D Printed Wearable Sensor for the Evaluation of Joint Movement Planes.
Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2025

A New Method for Accurate Shoulder Strength Measurements.
Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2025

A Framework for Estimating Shoulder Joint Angle Using Thermal Videos.
Proceedings of the International Workshop on Biomedical Applications, 2025

Effect of Arm Support as a Compensatory Mechanism on Knee Joint Kinetics During Sit-to-Stand in Patients with Osteoarthritis.
Proceedings of the International Workshop on Biomedical Applications, 2025

Synergistic Muscle Activation Patterns in Shoulder Strength Testing Using sEMG.
Proceedings of the International Workshop on Biomedical Applications, 2025

2024
Design, Calibration and Morphological Characterization of a Flexible Sensor with Adjustable Chemical Sensitivity and Possible Applications to Sports Medicine.
Sensors, October, 2024

Advanced Home-Based Shoulder Rehabilitation: A Systematic Review of Remote Monitoring Devices and Their Therapeutic Efficacy.
Sensors, May, 2024

Monitoring shoulder flexion-extension movements using a 3D-printed wearable sensor based on fiber Bragg grating technology.
Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 and IoT, 2024

A M-IMU-to-Segment Alignment Procedure for Shoulder Angles Estimation: a Preliminary Study.
Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 and IoT, 2024

A novel system integrating load cell for assessing shoulder muscle strength.
Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 and IoT, 2024

2023
Monitoring Scapular Kinematics through Wearable Magneto-Inertial Measurement Units: State of the Art and New Frontiers.
Sensors, August, 2023

2022
Virtual Reality for Shoulder Rehabilitation: Accuracy Evaluation of Oculus Quest 2.
Sensors, 2022

A Wearable System for Detecting Lumbar Hyperlordosis in Ballet Dancers: Design, Development and Feasibility Assessment.
Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2022

2021
Skin Strain Analysis of the Scapular Region and Wearables Design.
Sensors, 2021

Wearable system for elbow angles estimation based on a polymer encapsulated conductive textile.
Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2021

Polymer-encapsulated flexible strain sensors to monitor scapular movement: a pilot study.
Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2021

2020
A Multi-Parametric Wearable System to Monitor Neck Movements and Respiratory Frequency of Computer Workers.
Sensors, 2020

Wearable stretchable sensor based on conductive textile fabric for shoulder motion monitoring.
Proceedings of the 2020 IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2020

Conductive textile element embedded in a wearable device for joint motion monitoring.
Proceedings of the 2020 IEEE International Symposium on Medical Measurements and Applications, 2020

2019
Single-plane neck movements and respiratory frequency monitoring: a smart system for computer workers.
Proceedings of the 2nd Workshop on Metrology for Industry 4.0 and IoT MetroInd4.0&IoT 2019, 2019

A wearable system based on fiber Bragg grating for monitoring respiratory and heart activity of archers.
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2019

Cardiac monitoring with a smart textile based on polymer-encapsulated FBG: influence of sensor positioning.
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2019

Influence of motion artifacts on a smart garment for monitoring respiratory rate.
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2019


  Loading...