Michele A. Caponero

Orcid: 0000-0002-5728-3123

Affiliations:
  • Research Centre of Frascati, Rome, Italy


According to our database1, Michele A. Caponero authored at least 49 papers between 2005 and 2023.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of five.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

Online presence:

On csauthors.net:

Bibliography

2023
Assessment of a Multi-Sensor FBG-Based Wearable System in Sitting Postures Recognition and Respiratory Rate Evaluation of Office Workers.
IEEE Trans. Biomed. Eng., May, 2023

Smart Mattress Based on Multipoint Fiber Bragg Gratings for Respiratory Rate Monitoring.
IEEE Trans. Instrum. Meas., 2023

Three-Dimensional-Printed Sensing Samples Embedding Fiber Bragg Gratings: Metrological Evaluation of Different Sample Materials and Fiber Coatings.
IEEE Trans. Instrum. Meas., 2023

Plant Growth Monitoring: Design, Fabrication, and Feasibility Assessment of Wearable Sensors Based on Fiber Bragg Gratings.
Sensors, 2023

Design, fabrication and metrological characterization of a 3D-printed strain sensor based on fiber Bragg grating technology.
Proceedings of the 2023 IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2023

FBG-Based Mattress for Continuous Respiratory Rate Estimation: Influence of Positioning Over and Under the Bed.
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2023

Development of a flexible sensor based on fiber Bragg grating technology for simultaneous respiratory and heartbeat measurements.
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2023

2022
A Wearable System Composed of FBG-Based Soft Sensors for Trunk Compensatory Movements Detection in Post-Stroke Hemiplegic Patients.
Sensors, 2022

Fiber optic plant wearable sensors for growth and microclimate monitoring.
Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2022

2021
Plant Wearable Sensors Based on FBG Technology for Growth and Microclimate Monitoring.
Sensors, 2021

Humidity Sensing by Chitosan-Coated Fibre Bragg Gratings (FBG).
Sensors, 2021

Feasibility assessment of an FBG-based soft sensor embedded into a single-use surgical mask for respiratory monitoring.
Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2021

Cardiorespiratory monitoring using a mechanical and an optical system.
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2021

2020
An fMRI Compatible Smart Device for Measuring Palmar Grasping Actions in Newborns.
Sensors, 2020

A Multi-Parametric Wearable System to Monitor Neck Movements and Respiratory Frequency of Computer Workers.
Sensors, 2020

Special Issue "Fibre Optic Sensors for Structural and Geotechnical Monitoring".
Sensors, 2020

A Test Bench to Assess Systems for Respiratory Monitoring of Workers.
Proceedings of the 2020 IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2020

Feasibility Assessment of an FBG-based Wearable System for Monitoring Back Dorsal Flexion-Extension in Video Terminal Workers.
Proceedings of the 2020 IEEE International Instrumentation and Measurement Technology Conference, 2020

2019
Cardio-Respiratory Monitoring in Archery Using a Smart Textile Based on Flexible Fiber Bragg Grating Sensors.
Sensors, 2019

Critical Issues of Double-Metal Layer Coating on FBG for Applications at High Temperatures.
Sensors, 2019

Single-plane neck movements and respiratory frequency monitoring: a smart system for computer workers.
Proceedings of the 2nd Workshop on Metrology for Industry 4.0 and IoT MetroInd4.0&IoT 2019, 2019

A wearable system based on fiber Bragg grating for monitoring respiratory and heart activity of archers.
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2019

Cardiac monitoring with a smart textile based on polymer-encapsulated FBG: influence of sensor positioning.
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2019

2018
Temperature Monitoring during Radio Frequency Thermal Ablation Treatment on Ex Vivo perfused organ by Fiber Bragg Grating Sensors.
Proceedings of the 2018 IEEE International Symposium on Medical Measurements and Applications, 2018

Smart textile based on FBG sensors for breath-by-breath respiratory monitoring: tests on women.
Proceedings of the 2018 IEEE International Symposium on Medical Measurements and Applications, 2018

Multi-sensitive FBG-based needle for both relative humidity and breathing rate monitoring.
Proceedings of the 2018 IEEE International Symposium on Medical Measurements and Applications, 2018

Polymer-coated fiber optic probe for the monitoring of breathing pattern and respiratory rate.
Proceedings of the 40th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 2018

2017
Fiber Bragg Grating Measuring System for Simultaneous Monitoring of Temperature and Humidity in Mechanical Ventilation.
Sensors, 2017

Assessment of a linearly chirped fiber Bragg grating sensor under linear and non-linear temperature gradient.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017

Respiratory and cardiac rates monitoring during MR examination by a sensorized smart textile.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017

Fabrication and preliminary assessment of a fiber optic-based relative humidity sensor for application in mechanical ventilation.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017

Fabrication and calibration of three temperature probes for monitoring the effects of thermal cancer ablation.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017

Novel carbon fiber probe for temperature monitoring during thermal therapies.
Proceedings of the 2017 39th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 2017

A wearable textile for respiratory monitoring: Feasibility assessment and analysis of sensors position on system response.
Proceedings of the 2017 39th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 2017

2016
Feasibility assessment of an FBG-based probe for distributed temperature measurements during laser ablation.
Proceedings of the 2016 IEEE International Symposium on Medical Measurements and Applications, 2016

Influence of fiber Bragg grating length on temperature measurements in laser-irradiated organs.
Proceedings of the 2016 IEEE International Symposium on Medical Measurements and Applications, 2016

Linearly chirped fiber-optic Bragg grating as distributed temperature sensor for laser ablation.
Proceedings of the 2016 IEEE SENSORS, Orlando, FL, USA, October 30 - November 3, 2016, 2016

Temperature monitoring during radiofrequency ablation of liver: In vivo trials.
Proceedings of the 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 2016

Monitoring of thermal treatment by linearly chirped fiber Bragg grating sensors: Feasibility assessment during laser ablation on ex vivo liver.
Proceedings of the 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 2016

Design and preliminary assessment of a smart textile for respiratory monitoring based on an array of Fiber Bragg Gratings.
Proceedings of the 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 2016

2015
Feedforward Neural Network for Force Coding of an MRI-Compatible Tactile Sensor Array Based on Fiber Bragg Grating.
J. Sensors, 2015

Temperature monitoring during Laser Ablation by FBG sensors encapsulated within a metallic needle: Experiments on healthy swine tissue.
Proceedings of the 2015 IEEE International Symposium on Medical Measurements and Applications, 2015

Thermocouples for temperature monitoring during pancreatic laser ablation: Analysis of the measurement error.
Proceedings of the 2015 IEEE International Symposium on Medical Measurements and Applications, 2015

Fiber Bragg grating sensors for deformation monitoring of GEM foils in HEP detectors.
Proceedings of the 6th International Workshop on Advances in Sensors and Interfaces, 2015

Magnetic Resonance-compatible needle-like probe based on Bragg grating technology for measuring temperature during Laser Ablation.
Proceedings of the 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 2015

2014
An MR-compatible force sensor based on FBG technology for biomedical application.
Proceedings of the 36th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 2014

2013
Influence of FBG sensors length on temperature measures in laser-irradiated pancreas: Theoretical and experimental evaluation.
Proceedings of the 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 2013

2012
Theoretical Analysis and Experimental Evaluation of Laser-Induced Interstitial Thermotherapy in Ex Vivo Porcine Pancreas.
IEEE Trans. Biomed. Eng., 2012

2005
New Advances on Speckle-velocimeter for Robotized Vehicles.
Proceedings of the Climbing and Walking Robots, 2005


  Loading...