Berend Denkena

According to our database, Berend Denkena authored at least 90 papers between 2002 and 2022.

Collaborative distances:

• Dijkstra number of four.
• Erdős number of four.

2022

A regeneration process chain with an integrated decision support system for individual regeneration processes based on a virtual twin.

Carolin Kellenbrink, Nicolas Nübel, André Schnabel, Philipp Gilge, Joerg R. Seume, Berend Denkena, Stefan Helber

Int. J. Prod. Res., 2022

Machine Learning Based Reconstruction of Process Forces.

Berend Denkena, Heinrich Klemme, Dennis Stoppel

Proceedings of the Advances in System-Integrated Intelligence, 2022

Intelligent Manufacturing Cell for Implants.

Berend Denkena, Heinrich Klemme, Sebastian Kaiser, Maruan Shanib

Proceedings of the IEEE International Conference on Industrial Engineering and Engineering Management, 2022

In Situ Resistance Trimming of Directly Deposited Thin-Film Strain Gauges.

Rico Ottermann, Shuowen Zhang, Berend Denkena, Heinrich Klemme, Dennis Kowalke, Michael Korbacher, Folke Dencker, Marc Christopher Wurz

Proceedings of the 2022 IEEE Sensors, Dallas, TX, USA, October 30 - Nov. 2, 2022, 2022

2019

Surface integrity of turned laser-welded hybrid shafts.

Berend Denkena, Bernd Breidenstein, Thilo Grove, Vannila Prasanthan, Ludger Overmeyer, Sarah Nothdurft, Stefan Kaierle, Jörg Wallaschek, Jens Twiefel, H. Ohrdes, Hans Jürgen Maier, Thomas Hassel, Maximilian Mildebrath

Prod. Eng., 2019

Analysis of potentials to improve the machining of hybrid workpieces.

Berend Denkena, Benjamin Bergmann, Bernd Breidenstein, Vannila Prasanthan, Matthias Witt

Prod. Eng., 2019

Material identification based on machine-learning algorithms for hybrid workpieces during cylindrical operations.

Berend Denkena, Benjamin Bergmann, Matthias Witt

J. Intell. Manuf., 2019

Prediction of surface residual stress and hardness induced by ball burnishing through neural networks.

Frederico C. Magalhães, Carlos E. H. Ventura, Alexandre M. Abrão, Berend Denkena, Bernd Breidenstein, Kolja Meyer

Int. J. Manuf. Res., 2019

2018

Production-based design of a hybrid load introduction element for thin-walled CFRP Structures.

Lukas Groß, Alexander Herwig, David C. Berg, Carsten Schmidt, Berend Denkena, Peter Horst, Dieter Meiners

Prod. Eng., 2018

A new process chain for recycling of cemented carbide milling tools.

Berend Denkena, Marc-André Dittrich, Yanwei Liu

Prod. Eng., 2018

Frictionally damped tool holder for long projection cutting tools.

Berend Denkena, Benjamin Bergmann, Christian Teige

Prod. Eng., 2018

Highly Dynamic Spindle Integrated Magnet Actuators for Chatter Reduction.

Jan Königsberg, Jan Reiners, Bernd Ponick, Berend Denkena, Benjamin Bergmann

Int. J. Autom. Technol., 2018

2017

Influence of asymmetric cutting edge roundings on surface topography.

O. Maiss, Thilo Grove, Berend Denkena

Prod. Eng., 2017

Performance of a piezo-hydraulic fine positioning device: Experimental analyses with a scaled model.

Berend Denkena, Lars Hülsemeyer, Maik Bergmeier

Prod. Eng., 2017

New tool concept for grinding a plateau-like surface for tribological applications.

Berend Denkena, Thilo Grove, O. Maiss, V. Suntharakumaran

Prod. Eng., 2017

Temperature and energy partition for grinding of mixed oxide ceramics.

Berend Denkena, L. Gottwik, Thilo Grove, A. Wippermann

Prod. Eng., 2017

Smart and energy-efficient dust suction concept for milling of fibre-reinforced plastics.

Berend Denkena, Marc-André Dittrich, B.-H. Rahner

Prod. Eng., 2017

Holistic process planning chain for robot machining.

Berend Denkena, Jan Brüning, Lars Windels, Dirk Euhus, Stefan Kirsch, Daniel Overbeck, Thomas Lepper

Prod. Eng., 2017

2016

Influence of PVD-coating technology and pretreatments on residual stresses for sheet-bulk metal forming tools.

Wolfgang Tillmann, Dominic Stangier, Berend Denkena, Thilo Grove, Henning Lucas

Prod. Eng., 2016

Tribological measures for controlling material flow in sheet-bulk metal forming.

Maria Löffler, Kolja Andreas, Ulf Engel, Robert Schulte, Daniel Gröbel, Eugen Krebs, Dennis Freiburg, Dirk Biermann, Dominic Stangier, Wolfgang Tillmann, Tim Weikert, Sandro Wartzack, Stephan Tremmel, Henning Lucas, Berend Denkena, Marion Merklein

Prod. Eng., 2016

Simulation-based planning and evaluation of personnel scheduling in knowledge-intensive production systems.

Berend Denkena, Marc-André Dittrich, Florian Winter, Christian Wagener

Prod. Eng., 2016

Influence of the residual stress state of coatings on the wear behavior in external turning of AISI 4140 and Ti-6Al-4V.

Bernd Breidenstein, Berend Denkena, Jörg Vetter, Björn Richter

Prod. Eng., 2016

Repairing parts from nickel base material alloy by laser cladding and ball end milling.

Volker Böß, Berend Denkena, Volker Wesling, Stefan Kaierle, Felix Rust, Dennis Nespor, Boris Rottwinkel

Prod. Eng., 2016

2015

Gear profile grinding with metal bonded CBN tools.

Berend Denkena, D. Preising, Stephan Woiwode

Prod. Eng., 2015

Modeling and compensation of the interactions between geometrical errors and drive currents in directly driven gantry machine tools.

Berend Denkena, K. M. Litwinski, Martin Eckl

Prod. Eng., 2015

Kinematic analysis of the cutting speed for continuous generating grinding.

Berend Denkena, Jens Köhler, Andreas Schindler, Stephan Woiwode

Prod. Eng., 2015

Influence of the cutting edge radius on surface integrity in hard turning of roller bearing inner rings.

Berend Denkena, Thilo Grove, O. Maiss

Prod. Eng., 2015

Flow stress and temperature considerations for orthogonal cutting of an aluminum-alloyed UHC-steel.

Berend Denkena, Thilo Grove, Marc-André Dittrich

Prod. Eng., 2015

Significant influence factors on the grinding tool wear and cutting mechanisms during grinding of PCBN inserts.

Berend Denkena, Thilo Grove, L. Behrens

Prod. Eng., 2015

Design and analysis of a 2-DOF synchronous planar drive for machine tools.

Berend Denkena, J. Friederichs, Jonathan Fuchs

Prod. Eng., 2015

Advanced Control Strategies for Active Vibration Suppression in Laser Cutting Machines.

Berend Denkena, Martin Eckl, Thomas Lepper

Int. J. Autom. Technol., 2015

2014

Time-oriented pricing for the tool and mould manufacturing industry.

A. Nemeti, Berend Denkena

Prod. Eng., 2014

Chip formation and modeling of dynamic force behavior in machining polycrystalline iron-aluminum.

Berend Denkena, Hendrik Stiffel, Eike Hasselberg, Dennis Nespor

Prod. Eng., 2014

Dressing of vitrified bonded CBN tools for continuous generating grinding.

Berend Denkena, Jens Köhler, Stephan Woiwode

Prod. Eng., 2014

Behavior of the magnetic abrasive tool for cutting edge preparation of cemented carbide end mills.

Berend Denkena, Jens Köhler, Andreas Schindler

Prod. Eng., 2014

Chip formation and tool wear in turning of aluminum-alloyed UHC-steels.

Berend Denkena, Jens Köhler, Marc-André Dittrich

Prod. Eng., 2014

Interpretation and optimization of material flow via system behavior reconstruction.

Berend Denkena, Barbara Dengler, Karl Doreth, Claudia Krull, Graham Horton

Prod. Eng., 2014

Modeling and simulation of milling processes including process damping effects.

Berend Denkena, Wladimir Bickel, R. Grabowski

Prod. Eng., 2014

Application of methods for ecological optimization of crank shaft forging process.

Bernd-Arno Behrens, Berend Denkena, Hong-Seok Park, Jan Henjes, Stefan Kröning, Timur Yilkiran, Andreas Klassen

Prod. Eng., 2014

Surface and subsurface alterations induced by deep rolling of hardened AISI 1060 steel.

Alexandre M. Abrão, Berend Denkena, Bernd Breidenstein, Tobias Mörke

Prod. Eng., 2014

2013

Design and analysis of a prototypical sensory Z-slide for machine tools.

Berend Denkena, K. M. Litwinski, Dominik Brouwer, H. Boujnah

Prod. Eng., 2013

XY-table for desktop machine tools based on a new fluidic planar drive.

Berend Denkena, Haydar Kayapinar

Prod. Eng., 2013

Special issue WGP: "System-integrated intelligence: new challenges for product and production engineering".

Berend Denkena, Jürgen Gausemeier, Bernd Scholz-Reiter

Prod. Eng., 2013

Competence-based process planning for the workshop production.

Berend Denkena, F. Charlin, M. Merwart

Prod. Eng., 2013

Product Identification by Machined Micro Patterns.

Berend Denkena, Jörn Ostermann, Jens Köhler, Tobias Mörke, Benjamin Spitschan

Int. J. Autom. Technol., 2013

Adaptive Cutting Force Control with a Hybrid Axis System.

Berend Denkena, Felix Flöter

Int. J. Autom. Technol., 2013

A Software Architecture to Synchronize Interactivity of Concurrent Simulations in Systems Engineering.

Christian Bartelt, Volker Böß, Jan Brüning, Andreas Rausch, Berend Denkena, Jean Paul Tatou

Proceedings of the 20th ISPE International Conference on Concurrent Engineering, 2013

2012

Development of an advanced micro-positioning system for increasing operation accuracy: consideration of high pressure sealing.

Sabrina Pluemer, Kathrin Voges-Schwieger, Berend Denkena, Bernd-Arno Behrens

Prod. Eng., 2012

Adaptive process planning.

Berend Denkena, Leif-Erik Lorenzen, Justin Schmidt

Prod. Eng., 2012

Influence of the cutting edge rounding on the chip formation process: Part 1. Investigation of material flow, process forces, and cutting temperature.

Berend Denkena, Jens Köhler, Mesfin Sisay Mengesha

Prod. Eng., 2012

Chip formation in grinding: an experimental study.

Berend Denkena, Jens Köhler, Jan Kästner

Prod. Eng., 2012

Process stabilization with an adaptronic spindle system.

Berend Denkena, Olaf Gümmer

Prod. Eng., 2012

Flank milling of compliant workpieces with chamfered tools.

Berend Denkena, Wladimir Bickel, Volker Sellmeier

Prod. Eng., 2012

Condition based maintenance planning of highly productive machine tools.

Berend Denkena, Peter Bluemel, Stefan Kroening, Jens Roebbing

Prod. Eng., 2012

Integrative process chain optimization using a Genetic Algorithm.

Berend Denkena, Bernd-Arno Behrens, F. Charlin, Matthias Dannenberg

Prod. Eng., 2012

Multicriteria dimensioning of hard-finishing operations regarding cross-process interdependencies.

Berend Denkena, Helge Henning

J. Intell. Manuf., 2012

Standardized Communication in Simulation of Interacting Machine Tool Components.

Volker Böß, Jan Brüning, Berend Denkena

Proceedings of the Concurrent Engineering Approaches for Sustainable Product Development in a Multi-Disciplinary Environment, 2012

2011

Optimizing the order processing of customized products using product configuration.

Lars Hvam, Martin Bonev, Berend Denkena, Jan Thomas Schürmeyer, Barbara Dengler

Prod. Eng., 2011

Linking total costs and benefits of ownership (TCBO) and process chain simulation for integrated assessment of manufacturing technologies and processes.

Berend Denkena, Jan Thomas Schürmeyer, Mark Eikötter

Prod. Eng., 2011

CAD-based cost calculation of mould cavities.

Berend Denkena, Jan Thomas Schürmeyer, Volker Böß, Rabih Kaddour

Prod. Eng., 2011

Topography prediction of resilient parts after flank milling with chamfered tools.

Berend Denkena, Jens Köhler, Volker Sellmeier, Tobias Mörke

Prod. Eng., 2011

Dynamic analysis of a motor-integrated method for a higher milling stability.

Berend Denkena, Wladimir Bickel, Bernd Ponick, Judith Emmrich

Prod. Eng., 2011

Identification of weak spots in the metrological investigation of dynamic machine behaviour.

Christian Brecher, Berend Denkena, Knut Großmann, Paul Steinmann, Aous Bouabid, Dennis Heinisch, R. Hermes, Michael Löser

Prod. Eng., 2011

Automated design of fixtures based on FEM simulations.

Berend Denkena, Hans-Christian Möhring, K. M. Litwinski, Dennis Heinisch

Int. J. Comput. Aided Eng. Technol., 2011

Modification of the Tool-Workpiece Contact Conditions to Influence the Tool Wear and Workpiece Loading During Hard Turning.

Berend Denkena, Jens Köhler, Roland Meyer, Hendrik Stiffel

Int. J. Autom. Technol., 2011

2010

Influence of scaled undeformed sections of cut on strain rate, cutting force and temperature.

Berend Denkena, Luis de Leon, Jens Köhler

Prod. Eng., 2010

Genetics and intelligence: new approaches in production engineering.

Berend Denkena, Helge Henning, Leif-Erik Lorenzen

Prod. Eng., 2010

2009

Grinding of microstructured functional surfaces: a novel strategy for dressing of microprofiles.

Berend Denkena, Luis de Leon, Bo Wang

Prod. Eng., 2009

Rule-based quotation costing of pressure die casting moulds.

Berend Denkena, Leif-Erik Lorenzen, Jan Thomas Schürmeyer

Prod. Eng., 2009

Modelling and simulation of process: machine interaction in grinding.

Jan C. Aurich, Dirk Biermann, Heribert Blum, Christian Brecher, Carsten Carstensen, Berend Denkena, Fritz Klocke, Matthias Kröger, Paul Steinmann, Klaus Weinert

Prod. Eng., 2009

Model-Based Dimensioning of Multistage Processes Regarding Multiple Criteria.

Berend Denkena, Helge Henning, Jan Henjes

Proceedings of the 6th CIRP-Sponsored International Conference on Digital Enterprise Technology, 2009

2008

Computer-aided analysis of flow-characteristics of a micro-positioning system.

Berend Denkena, S. Simon

Prod. Eng., 2008

Design of dynamic multi sensor systems.

Berend Denkena, Hans-Christian Möhring, K. M. Litwinski

Prod. Eng., 2008

Reduction of wear induced surface zone effects during hard turning by means of new tool geometries.

Berend Denkena, David Boehnke, Roland Meyer

Prod. Eng., 2008

Machining induced residual stress in structural aluminum parts.

Berend Denkena, David Boehnke, L. de León

Prod. Eng., 2008

Sonic analysis in cut-off grinding of concrete.

Berend Denkena, David Boehnke, Benjamin Konopatzki, Josef-Christian Buhl, Sameh Rahman, Lars Robben

Prod. Eng., 2008

Microstructuring of functional surfaces by means of cutting processes.

Berend Denkena, David Boehnke, Jan Kästner

Prod. Eng., 2008

Tool behavior at alternating thermo-mechanical loads during milling of compounds out of aluminum and spheroidal cast iron.

Berend Denkena, David Boehnke, P. Dziewiecki

Prod. Eng., 2008

2007

Experimental investigation and simulation of machining thin-walled workpieces.

Berend Denkena, Carsten Schmidt

Prod. Eng., 2007

Dressing of filigree fine-grained metal bonded grinding wheels.

Berend Denkena, Martin Reichstein, Dennis Hahmann

Prod. Eng., 2007

Mechanical information storage by use of an excited turning tool.

Berend Denkena, Jörn Ostermann, Christian Becker, Christian Spille

Prod. Eng., 2007

Simulationsbasierte Multisensorsystemauslegung.

Berend Denkena, Hans-Christian Möhring, K. M. Litwinski

Proceedings of the Autonome Mobile Systeme 2007, 2007

Schlüsselkomponenten für Roboter in der Produktion Roboterhaut und Sicherheitskonzept für die Mensch-Roboter Kooperation.

Berend Denkena, P. Hesse, J. Friederichs, Armin Wedler

Proceedings of the Autonome Mobile Systeme 2007, 2007

2006

Model-based control of a hexapod with linear direct drives.

Berend Denkena, Christian Holz, Houssem Abdellatif

Int. J. Comput. Integr. Manuf., 2006

Integrated Process Planning and Production Control.

Leif-Erik Lorenzen, Peer-Oliver Woelk, Berend Denkena, Thorsten Scholz, Ingo J. Timm, Otthein Herzog

Proceedings of the Multiagent Engineering, Theory and Applications in Enterprises., 2006

2005

Tool breakage monitoring using motor current signals for machine tools with linear motors.

Xiaoli Li, Ruxu Du, Berend Denkena, Joachim Imiela

IEEE Trans. Ind. Electron., 2005

Combining manual haptic path planning of industrial robots with automatic path smoothing.

Heinz Wörn, Björn Hein, Detlef Mages, Berend Denkena, Rene Apitz, Pawel Kowalski, Niels Reimer

Proceedings of the ICINCO 2005, 2005

2003

Mass Customized Shoe Lasts.

Berend Denkena, Stephan Scherger, Martin Lünemann

Proceedings of the 2nd Interdisciplinary World Congress on Mass Customization and Personalization, 2003

Multiagent-Based Process Planning and Scheduling in Context of Supply Chains.

Berend Denkena, Michael Zwick, Peer-Oliver Woelk

Proceedings of the Holonic and Multi-Agent Systems for Manufacturing, 2003

2002

Process Planning and Scheduling with Multiagent Systems.

Berend Denkena, Hans Kurt Tönshoff, Michael Zwick, Peer-Oliver Woelk

Proceedings of the Knowledge and Technology Integration in Production and Services: Balancing Knowledge in Product and Service Life Cycle, 2002