Zi-Qiang Zhu

Orcid: 0000-0001-7175-3307

Affiliations:
  • University of Sheffield, UK


According to our database1, Zi-Qiang Zhu authored at least 112 papers between 2000 and 2024.

Collaborative distances:
  • Dijkstra number2 of four.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

Online presence:

On csauthors.net:

Bibliography

2024
Current Measurement Gain Compensation Using High-Frequency Signal Injection in Dual Three-Phase PMSM Systems.
IEEE Trans. Ind. Electron., April, 2024

2023
A Space Vector Modulation Strategy for PMSMs Operating at Low Switching-to-Fundamental Frequency Ratio.
IEEE Trans. Ind. Electron., November, 2023

Arbitrary Current Harmonic Decomposition and Regulation for Permanent Magnet Synchronous Machines.
IEEE Trans. Ind. Electron., 2023

2022
Multiple Synchronous Reference Frame Current Harmonic Regulation of Dual Three Phase PMSM With Enhanced Dynamic Performance and System Stability.
IEEE Trans. Ind. Electron., 2022

Suppression of Major Current Harmonics for Dual Three-Phase PMSMs by Virtual Multi Three-Phase Systems.
IEEE Trans. Ind. Electron., 2022

Reduction of On-Load DC Winding-Induced Voltage in Partitioned Stator Wound Field Switched Flux Machines by Dual Three-Phase Armature Winding.
IEEE Trans. Ind. Electron., 2022

Simultaneous Sensorless Rotor Position and Torque Estimation for IPMSM at Standstill and Low Speed Based on High-Frequency Square Wave Voltage Injection.
IEEE Trans. Ind. Electron., 2022

Intent-Slot Correlation Modeling for Joint Intent Prediction and Slot Filling.
J. Comput. Sci. Technol., 2022

Effect of End-Winding on Electromagnetic Performance of Fractional Slot and Vernier PM Machines With Different Slot/Pole Number Combinations and Winding Configurations.
IEEE Access, 2022

Permanent Magnet Vernier Machines for Direct-Drive Offshore Wind Power: Benefits and Challenges.
IEEE Access, 2022

Optimization and Improvement of Advanced Nonoverlapping Induction Machines for EVs/HEVs.
IEEE Access, 2022

2021
Spectral Analysis and Sideband Harmonic Cancellation of Six-Step Operation With Low Carrier-Fundamental Frequency Ratio for High-Speed Brushless DC Drives.
IEEE Trans. Ind. Electron., 2021

A Commutation Error Compensation Strategy for High-Speed Brushless DC Drive Based on Adaline Filter.
IEEE Trans. Ind. Electron., 2021

A Novel Sensorless Initial Position Estimation and Startup Method.
IEEE Trans. Ind. Electron., 2021

Improved Direct Torque Control Method for Dual-Three-Phase Permanent-Magnet Synchronous Machines With Back EMF Harmonics.
IEEE Trans. Ind. Electron., 2021

Analysis of Split-Tooth Stator Slot PM Machine.
IEEE Trans. Ind. Electron., 2021

Online Parameter Estimation for Permanent Magnet Synchronous Machines: An Overview.
IEEE Access, 2021

PWM Switching Delay Correction Method for High-Speed Brushless DC Drives.
IEEE Access, 2021

Influence of Stator Gap on Electromagnetic Performance of 6-Slot/2-Pole Modular High Speed Permanent Magnet Motor With Toroidal Windings.
IEEE Access, 2021

IEEE Access Special Section Editorial: Advanced Energy Conversion Systems Based on Multi-Port Electrical Machines.
IEEE Access, 2021

Comparative Study of Electromagnetic Performance of Stator Slot PM Machines.
IEEE Access, 2021

An Online Position Error Correction Method for Sensorless Control of Permanent Magnet Synchronous Machine With Parameter Mismatch.
IEEE Access, 2021

Analysis of Novel Dual-PM Vernier Machines.
Proceedings of the 16th International Conference on Ecological Vehicles and Renewable Energies, 2021

Novel Dual-PM Spoke-Type Flux-Reversal Machines.
Proceedings of the 16th International Conference on Ecological Vehicles and Renewable Energies, 2021

Six-phase Pole Changing Winding Induction Machine with 3rd Harmonic Injection.
Proceedings of the 16th International Conference on Ecological Vehicles and Renewable Energies, 2021

A Commutation Optimization Strategy for High Speed Brushless DC Drives with Inaccurate Rotor Position Signals.
Proceedings of the 16th International Conference on Ecological Vehicles and Renewable Energies, 2021

Recent Developments of High Speed Electrical Machine Drive Systems.
Proceedings of the 16th International Conference on Ecological Vehicles and Renewable Energies, 2021

2020
Relationship Between Homopolar Inductor Machine and Wound-Field Synchronous Machine.
IEEE Trans. Ind. Electron., 2020

Adaptive Threshold Correction Strategy for Sensorless High-Speed Brushless DC Drives Considering Zero-Crossing-Point Deviation.
IEEE Trans. Ind. Electron., 2020

Analysis of Consequent-Pole Flux Reversal Permanent Magnet Machine With Biased Flux Modulation Theory.
IEEE Trans. Ind. Electron., 2020

Design and Analysis of Novel Asymmetric-Stator-Pole Flux Reversal PM Machine.
IEEE Trans. Ind. Electron., 2020

A Novel Hybrid-Magnetic-Circuit Variable Flux Memory Machine.
IEEE Trans. Ind. Electron., 2020

Analysis and Reduction of On-Load DC Winding Induced Voltage in Wound Field Switched Flux Machines.
IEEE Trans. Ind. Electron., 2020

Current Harmonics Suppression Strategy for PMSM With Nonsinusoidal Back-EMF Based on Adaptive Linear Neuron Method.
IEEE Trans. Ind. Electron., 2020

Comparative Analysis of Flux Reversal Permanent Magnet Machines With Toroidal and Concentrated Windings.
IEEE Trans. Ind. Electron., 2020

Novel Current Profile of Switched Reluctance Machines for Torque Density Enhancement in Low-Speed Applications.
IEEE Trans. Ind. Electron., 2020

System-Level Investigation of Multi-MW Direct-Drive Wind Power PM Vernier Generators.
IEEE Access, 2020

A Review on Transverse Flux Permanent Magnet Machines for Wind Power Applications.
IEEE Access, 2020

Influence of Slot Number on Electromagnetic Performance of 2-pole High-Speed Permanent Magnet Motors with Toroidal Windings.
Proceedings of the Fifteenth International Conference on Ecological Vehicles and Renewable Energies, 2020

Comparison of 6-slot/2-pole High-Speed Permanent Magnet Motors with Different Winding Configurations.
Proceedings of the Fifteenth International Conference on Ecological Vehicles and Renewable Energies, 2020

2019
Stepwise Magnetization Control Strategy for DC-Magnetized Memory Machine.
IEEE Trans. Ind. Electron., 2019

Reduction of Open-Circuit DC-Winding-Induced Voltage in Wound Field Switched Flux Machines by Skewing.
IEEE Trans. Ind. Electron., 2019

Combined Multiphysics Model of Switched Flux PM Machines Under Fault Operations.
IEEE Trans. Ind. Electron., 2019

Influence of Gear Ratio on the Performance of Fractional Slot Concentrated Winding Permanent Magnet Machines.
IEEE Trans. Ind. Electron., 2019

Overview of Hybrid Excited Machines for Electric Vehicles.
Proceedings of the Fourteenth International Conference on Ecological Vehicles and Renewable Energies, 2019

Analysis of Open-Circuit DC Winding Induced Voltage in Partitioned-Stator Hybrid-Excited Switched-Flux Machine.
Proceedings of the Fourteenth International Conference on Ecological Vehicles and Renewable Energies, 2019

Reduction of Open-Circuit DC Winding Induced Voltage in Hybrid-Excited Switched -Flux Permanent Magnet Machine.
Proceedings of the Fourteenth International Conference on Ecological Vehicles and Renewable Energies, 2019

2018
Synthesis of Hybrid Magnet Memory Machines Having Separate Stators for Traction Applications.
IEEE Trans. Veh. Technol., 2018

Torque Improvement in Five-Phase Unequal Tooth SPM Machine by Injecting Third Harmonic Current.
IEEE Trans. Veh. Technol., 2018

Identification of Flux Linkage Map of Permanent Magnet Synchronous Machines Under Uncertain Circuit Resistance and Inverter Nonlinearity.
IEEE Trans. Ind. Informatics, 2018

Analysis of Air-Gap Field Modulation and Magnetic Gearing Effect in Fractional-Slot Concentrated-Winding Permanent-Magnet Synchronous Machines.
IEEE Trans. Ind. Electron., 2018

Thrust Ripple Analysis on Toroidal-Winding Linear Permanent Magnet Vernier Machine.
IEEE Trans. Ind. Electron., 2018

Comparative Study of Hybrid PM Memory Machines Having Single- and Dual-Stator Configurations.
IEEE Trans. Ind. Electron., 2018

Analysis of Dual Three-Phase Permanent-Magnet Synchronous Machines With Different Angle Displacements.
IEEE Trans. Ind. Electron., 2018

Comparative analysis of variable flux reluctance machines with double- and single-layer concentrated armature windings.
Proceedings of the Thirteenth International Conference on Ecological Vehicles and Renewable Energies, 2018

2017
Initial Rotor Position Estimation Using Zero-Sequence Carrier Voltage for Permanent-Magnet Synchronous Machines.
IEEE Trans. Ind. Electron., 2017

Optimum Injected Harmonics Into Magnet Shape in Multiphase Surface-Mounted PM Machine for Maximum Output Torque.
IEEE Trans. Ind. Electron., 2017

Comparative Study of Fault-Tolerant Switched-Flux Permanent-Magnet Machines.
IEEE Trans. Ind. Electron., 2017

A Novel Series Power Quality Controller With Reduced Passive Power Filter.
IEEE Trans. Ind. Electron., 2017

Improved Rotor Position Estimation Accuracy by Rotating Carrier Signal Injection Utilizing Zero-Sequence Carrier Voltage for Dual Three-Phase PMSM.
IEEE Trans. Ind. Electron., 2017

Fast Determination of Moment of Inertia of Permanent Magnet Synchronous Machine Drives for Design of Speed Loop Regulator.
IEEE Trans. Control. Syst. Technol., 2017

2016
A Novel Zero-Sequence Model-Based Sensorless Method for Open-Winding PMSM With Common DC Bus.
IEEE Trans. Ind. Electron., 2016

Novel Square-Wave Signal Injection Method Using Zero-Sequence Voltage for Sensorless Control of PMSM Drives.
IEEE Trans. Ind. Electron., 2016

Carrier Signal Injection-Based Sensorless Control for Permanent-Magnet Synchronous Machine Drives Considering Machine Parameter Asymmetry.
IEEE Trans. Ind. Electron., 2016

Novel Carrier Signal Injection Method Using Zero-Sequence Voltage for Sensorless Control of PMSM Drives.
IEEE Trans. Ind. Electron., 2016

Analytical On-Load Subdomain Field Model of Permanent-Magnet Vernier Machines.
IEEE Trans. Ind. Electron., 2016

Performance Comparison of Doubly Salient Reluctance Machine Topologies Supplied by Sinewave Currents.
IEEE Trans. Ind. Electron., 2016

Improved Sensorless Control of Switched-Flux Permanent-Magnet Synchronous Machines Based on Different Winding Configurations.
IEEE Trans. Ind. Electron., 2016

Novel Consequent-Pole Hybrid Excited Machine With Separated Excitation Stator.
IEEE Trans. Ind. Electron., 2016

2015
Torque Improvement of Dual Three-Phase Permanent-Magnet Machine With Third-Harmonic Current Injection.
IEEE Trans. Ind. Electron., 2015

Reduction of Both Harmonic Current and Torque Ripple for Dual Three-Phase Permanent-Magnet Synchronous Machine Using Modified Switching-Table-Based Direct Torque Control.
IEEE Trans. Ind. Electron., 2015

Enhancement of Steady-State Performance in Direct-Torque-Controlled Dual Three-Phase Permanent-Magnet Synchronous Machine Drives With Modified Switching Table.
IEEE Trans. Ind. Electron., 2015

Position-Offset-Based Parameter Estimation Using the Adaline NN for Condition Monitoring of Permanent-Magnet Synchronous Machines.
IEEE Trans. Ind. Electron., 2015

Quantum Genetic Algorithm-Based Parameter Estimation of PMSM Under Variable Speed Control Accounting for System Identifiability and VSI Nonlinearity.
IEEE Trans. Ind. Electron., 2015

Improved Rotor Position Estimation in Sensorless-Controlled Permanent-Magnet Synchronous Machines Having Asymmetric-EMF With Harmonic Compensation.
IEEE Trans. Ind. Electron., 2015

Modular Permanent-Magnet Machines With Alternate Teeth Having Tooth Tips.
IEEE Trans. Ind. Electron., 2015

A Novel Integrated Power Quality Controller for Microgrid.
IEEE Trans. Ind. Electron., 2015

Reliability assessment of fault tolerant permanent magnet AC drives.
Proceedings of the IECON 2015, 2015

Comparative study of alternative modular switched flux permanent magnet machines.
Proceedings of the IEEE International Conference on Industrial Technology, 2015

Comparative study of short-pitched and fully-pitched SRMs supplied by sine wave currents.
Proceedings of the IEEE International Conference on Industrial Technology, 2015

2014
Simplified Analytical Model and Investigation of Open-Circuit AC Winding Loss of Permanent-Magnet Machines.
IEEE Trans. Ind. Electron., 2014

Average Torque Improvement of Interior Permanent-Magnet Machine Using Third Harmonic in Rotor Shape.
IEEE Trans. Ind. Electron., 2014

Determination of Maximum Electromagnetic Torque in PM Brushless Machines Having Two-Segment Halbach Array.
IEEE Trans. Ind. Electron., 2014

Direct Torque Control of Permanent-Magnet Synchronous Machine Drives With a Simple Duty Ratio Regulator.
IEEE Trans. Ind. Electron., 2014

Investigation of Saliency in a Switched-Flux Permanent-Magnet Machine Using High-Frequency Signal Injection.
IEEE Trans. Ind. Electron., 2014

Simplified Analytical Optimization and Comparison of Torque Densities Between Electrically Excited and Permanent-Magnet Machines.
IEEE Trans. Ind. Electron., 2014

Analysis of Eccentricity in Permanent-Magnet Tubular Machines.
IEEE Trans. Ind. Electron., 2014

2013
Parameter Estimation for Condition Monitoring of PMSM Stator Winding and Rotor Permanent Magnets.
IEEE Trans. Ind. Electron., 2013

2012
Comparison of Analytical Models of Cogging Torque in Surface-Mounted PM Machines.
IEEE Trans. Ind. Electron., 2012

Influence of Nonideal Voltage Measurement on Parameter Estimation in Permanent-Magnet Synchronous Machines.
IEEE Trans. Ind. Electron., 2012

Analytical modeling of eddy current loss in retaining sleeve of surface-mounted PM machines accounting for influence of slot opening.
Proceedings of the 21st IEEE International Symposium on Industrial Electronics, 2012

2011
Investigation of Effectiveness of Sensorless Operation in Carrier-Signal-Injection-Based Sensorless-Control Methods.
IEEE Trans. Ind. Electron., 2011

Online Multiparameter Estimation of Nonsalient-Pole PM Synchronous Machines With Temperature Variation Tracking.
IEEE Trans. Ind. Electron., 2011

Saliency investigation of PM brushless AC motors for high-frequency carrier signal injection-based sensorless control.
Proceedings of the 17th International Conference on Automation and Computing, 2011

2010
Comparison of two novel MRAS based strategies for identifying parameters in permanent magnet synchronous motors.
Int. J. Autom. Comput., 2010

Multi-parameter estimation of non-salient pole permanent magnet synchronous machines by using evolutionary algorithms.
Proceedings of the Fifth International Conference on Bio-Inspired Computing: Theories and Applications, 2010

2008
Modular Three-Phase Permanent-Magnet Brushless Machines for In-Wheel Applications.
IEEE Trans. Veh. Technol., 2008

Multi-Phase Flux-Switching Permanent Magnet Brushless Machine for Aerospace Application.
Proceedings of the Industry Applications Society Annual Meeting, 2008

Fault-Tolerant Flux-Switching Permanent Magnet Brushless AC Machines.
Proceedings of the Industry Applications Society Annual Meeting, 2008

Design Tradeoffs between Stator Core Loss and Torque Ripple in IPM Machines.
Proceedings of the Industry Applications Society Annual Meeting, 2008

Analysis of Rotor Core Eddy-Current Losses in Interior Permanent Magnet Synchronous Machines.
Proceedings of the Industry Applications Society Annual Meeting, 2008

Winding Inductances of Fractional Slot Surface-Mounted Permanent Magnet Brushless Machines.
Proceedings of the Industry Applications Society Annual Meeting, 2008

Modeling and Analysis of a Tubular Oscillating Permanent Magnet Actuator.
Proceedings of the Industry Applications Society Annual Meeting, 2008

2007
Electrical Machines and Drives for Electric, Hybrid, and Fuel Cell Vehicles.
Proc. IEEE, 2007

Estimation of Winding Resistance and PM Flux-Linkage in Brushless AC Machines by Reduced-Order Extended Kalman Filter.
Proceedings of the IEEE International Conference on Networking, Sensing and Control, 2007

Improved Signal Injection Based Sensorless Technique for PM Brushless AC Drives.
Proceedings of the IEEE International Conference on Networking, Sensing and Control, 2007

Influence of Machine Topology and Cross-Coupling Magnetic Saturation on Rotor Position Estimation Accuracy in Extended Back-EMF Based Sensorless PM Brushless AC Drives.
Proceedings of the Conference Record of the 2007 IEEE Industry Applications Conference Forty-Second IAS Annual Meeting, 2007

Improved Rotor Position Estimation by Signal Injection in Brushless AC Motors, Accounting for Cross-Coupling Magnetic Saturation.
Proceedings of the Conference Record of the 2007 IEEE Industry Applications Conference Forty-Second IAS Annual Meeting, 2007

2006
Improved sensorless operation of interior PM BLAC motor drives with reduced-order EKF.
Int. J. Autom. Comput., 2006

2005
Application of full-order and simplified EKFs to sensorless PM brushless AC machines.
Int. J. Autom. Comput., 2005

2004
Simplified EKF based sensorless direct torque control of permanent magnet brushless AC drives.
Int. J. Autom. Comput., 2004

2000
Acoustic noise radiated by PWM-controllel induction machine drives.
IEEE Trans. Ind. Electron., 2000


  Loading...