Jan G. Korvink

Orcid: 0000-0003-4354-7295

Affiliations:
  • Karlsruhe Institute of Technology (KIT), Germany


According to our database1, Jan G. Korvink authored at least 32 papers between 1996 and 2022.

Collaborative distances:
  • Dijkstra number2 of four.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

Online presence:

On csauthors.net:

Bibliography

2022
Topology optimization for surface flows.
J. Comput. Phys., 2022

Fiber bundle topology optimization for surface flows.
CoRR, 2022

Capacitive Proximity Sensor for Non-Contact Endoscope Localization.
Proceedings of the 2022 International Conference on Robotics and Automation, 2022

2020
Gradient-Induced Mechanical Vibration of Neural Interfaces During MRI.
IEEE Trans. Biomed. Eng., 2020

2019
Correction: Design and Simulation of a Wireless SAW-Pirani Sensor with Extended Range and Sensitivity.
Sensors, 2019

Design and Simulation of a Wireless SAW-Pirani Sensor with Extended Range and Sensitivity.
Sensors, 2019

Motion prediction enables simulated MR-imaging of freely moving model organisms.
PLoS Comput. Biol., 2019

Topology optimization on two-dimensional manifolds.
CoRR, 2019

A Novel Sensor Design and Fabrication for Wireless Interventional MRI Through Induction Coupling.
Proceedings of the 2019 IEEE SENSORS, Montreal, QC, Canada, October 27-30, 2019, 2019

2018
Self-consistent adjoint analysis for topology optimization of electromagnetic waves.
J. Comput. Phys., 2018

2016
CD-Based Microfluidics for Primary Care in Extreme Point-of-Care Settings.
Micromachines, 2016

2015
Computationally efficient and stable order reduction methods for a large-scale model of MEMS piezoelectric energy harvester.
Microelectron. Reliab., 2015

Implementation of an in-field CMOS frequency division multiplexer for 9.4 T magnetic resonance applications.
Int. J. Circuit Theory Appl., 2015

2014
Designing MR Shim Arrays With Irregular Coil Geometry: Theoretical Considerations.
IEEE Trans. Biomed. Eng., 2014

SYMPLER: SYMbolic ParticLE simulatoR with grid-computing interface.
Comput. Phys. Commun., 2014

2012
Electrowetting droplets investigated with smoothed particle hydrodynamics and moving least squares.
Proceedings of the 7th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2012

Processing of 3D multilevel SU-8 fluidic network assisted by PerMX dry-photoresist lamination.
Proceedings of the 7th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2012

Conductive and transparent gel microstructures fabricated by inkjet printing of ionic liquid based fluids.
Proceedings of the 7th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2012

Top-down vs. bottom-up coarse-graining of graphene and CNTs for nanodevice simulation.
Proceedings of the 7th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, 2012

2011
Analog circuit synthesis using two-port theory and genetic programming.
Proceedings of the AFRICON 2011, 2011

2010
An MRI Receiver Coil Produced by Inkjet Printing Directly on to a Flexible Substrate.
IEEE Trans. Medical Imaging, 2010

2009
Parametric model order reduction accelerated by subspace recycling.
Proceedings of the 48th IEEE Conference on Decision and Control, 2009

2007
Modeling, Design, and Verification for the Analog Front-End of a MEMS-Based Parallel Scanning-Probe Storage Device.
IEEE J. Solid State Circuits, 2007

2006
Modeling, Simulation, and Optimization of Electrowetting.
IEEE Trans. Comput. Aided Des. Integr. Circuits Syst., 2006

2005
Preserving the film coefficient as a parameter in the compact thermal model for fast electrothermal simulation.
IEEE Trans. Comput. Aided Des. Integr. Circuits Syst., 2005

2004
Model Order Reduction for Large Scale Engineering Models Developed in ANSYS.
Proceedings of the Applied Parallel Computing, 2004

2003
A general purpose adaptivity driver for FE software.
Softw. Pract. Exp., 2003

2000
Nanometer-Scale Height Measurements in Micromachined Picoliter Vials Based on Interference Fringe Analysis.
Proceedings of the 15th International Conference on Pattern Recognition, 2000

1999
Equivalent circuit model of resistive IC sensors derived with the box integration method.
IEEE Trans. Comput. Aided Des. Integr. Circuits Syst., 1999

Smart Enumeration in C++: Virtual Construction, Message Dispatching and Tables.
Softw. Pract. Exp., 1999

1997
An error indicator and automatic adaptive meshing for electrostatic boundary element simulations.
IEEE Trans. Comput. Aided Des. Integr. Circuits Syst., 1997

1996
Enhanced multipole acceleration technique for the solution of large Poisson computations.
IEEE Trans. Comput. Aided Des. Integr. Circuits Syst., 1996


  Loading...