Kazuo Yamazaki

According to our database1, Kazuo Yamazaki authored at least 20 papers between 1988 and 2019.

Collaborative distances:
  • Dijkstra number2 of four.
  • Erdős number3 of four.



In proceedings 
PhD thesis 


On csauthors.net:


Markov Selections for the Magnetohydrodynamics and the Hall-Magnetohydrodynamics Systems.
J. Nonlinear Sci., 2019

Two examples on the property of the noise in the systems of equations of fluid mechanics.
J. Comput. Appl. Math., 2019

Global regularity of the logarithmically supercritical MHD system with zero diffusivity.
Appl. Math. Lett., 2014

A study on automatic on-machine inspection system for 3D modeling and measurement of cutting tools.
J. Intell. Manuf., 2013

Energy saving control in five-axis machine tools using contouring control.
Proceedings of the European Control Conference, 2013

A Study of Nanometric Surface Generation on Tungsten Carbide Using a Micro Polycrystalline Diamond End Mill.
Int. J. Autom. Technol., 2012

Estimation of Dynamic Mechanical Error for Evaluation of Machine Tool Structures.
Int. J. Autom. Technol., 2012

Automatic 3D model reconstruction of cutting tools from a single camera.
Comput. Ind., 2010

Development of a computer assistant programming system for micro/nano milling tool fabrication by multi-axis wire EDM.
Int. J. Comput. Integr. Manuf., 2009

Reduction of Consumed Energy and Control Input Variance in Machine Tool Feed Drives by Contouring Control.
Int. J. Autom. Technol., 2009

An event-driven simulation method for motor driver in virtual machine tool system.
J. Intell. Manuf., 2008

Automatic Segmentation of the Apparent Contour for 3D Modeling of Cutting Tools from Single View.
Proceedings of the Advances in Visual Computing, 4th International Symposium, 2008

An Experimental Study of Reconstruction of Tool Cutting Edge Features Using Space Carving Method.
Proceedings of the Advances in Visual Computing, 4th International Symposium, 2008

Model-driven design and implementation of discrete event control for a machine tool control system.
Int. J. Comput. Integr. Manuf., 2007

3D Reconstruction and Pose Determination of the Cutting Tool from a Single View.
Proceedings of the Advances in Visual Computing, Third International Symposium, 2007

Robust Contouring Control for Multi-Axis Feed Drive Systems.
Proceedings of 11th IEEE International Conference on Emerging Technologies and Factory Automation, 2006

Line Extraction with Composite Background Subtract.
Proceedings of the Third Canadian Conference on Computer and Robot Vision (CRV 2006), 2006

On the fault diagnosis in the presence of unknown fault models using pass/fail information.
Proceedings of the International Symposium on Circuits and Systems (ISCAS 2005), 2005

A surface based approach to recognition of geometric features for quality freeform surface machining.
Comput. Aided Des., 2004

Mechatronics engineering education and dissemination program.
Vis. Comput., 1988