Ming Liu

Orcid: 0000-0003-0998-4221

Affiliations:
  • North Carolina State University, Neuromuscular Rehabilitation Engineering Laboratory, Raleigh, NC, USA
  • Assist Equipment Development Inc, Cary, NC, USA
  • University of Rhode Island, Department of Electrical, Computer, and Biomedical Engineering, Kingston, RI, USA (PhD 2005)


According to our database1, Ming Liu authored at least 28 papers between 2007 and 2025.

Collaborative distances:
  • Dijkstra number2 of four.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

Online presence:

On csauthors.net:

Bibliography

2025
Evaluating Cognitive Workload With the Auditory Stroop Task While Using a Lower Limb Prosthesis: a Feasibility Study.
Proceedings of the International Conference On Rehabilitation Robotics, 2025

2024
Abduction/Adduction Assistance From Powered Hip Exoskeleton Enables Modulation of User Step Width During Walking.
IEEE Trans. Biomed. Eng., January, 2024

Soft Variable Resistance Material for Pressure Sensing Platform.
Proceedings of the 46th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 2024

Enhancing User-Prosthesis Integration Through Intelligent Transparency.
Proceedings of the 10th IEEE RAS/EMBS International Conference for Biomedical Robotics and Biomechatronics, 2024

2023
Development and Online Validation of an Intrinsic Fault Detector for a Powered Robotic Knee Prosthesis.
IROS, 2023

Closed-Loop Feedback Control of Human Step Width During Walking by Mediolaterally Acting Robotic Hip Exoskeleton.
IROS, 2023

1-D Manual Tracing Based on a High Density Haptic Stimulation Grid - a Pilot Effort.
Proceedings of the IEEE World Haptics Conference, 2023

2022
Characterizing Prosthesis Control Fault During Human-Prosthesis Interactive Walking Using Intrinsic Sensors.
IEEE Robotics Autom. Lett., 2022

Design of EMG-driven Musculoskeletal Model for Volitional Control of a Robotic Ankle Prosthesis.
Proceedings of the IEEE/RSJ International Conference on Intelligent Robots and Systems, 2022

2021
A Powered Prosthetic Ankle Designed for Task Variability - A Concept Validation.
Proceedings of the IEEE/RSJ International Conference on Intelligent Robots and Systems, 2021

User Controlled Interface for Tuning Robotic Knee Prosthesis.
Proceedings of the IEEE/RSJ International Conference on Intelligent Robots and Systems, 2021

A Data-Driven Reinforcement Learning Solution Framework for Optimal and Adaptive Personalization of a Hip Exoskeleton.
Proceedings of the IEEE International Conference on Robotics and Automation, 2021

Development of a Wearable Human-Machine Interface to Track Forearm Rotation via an Optical Sensor.
Proceedings of the 43rd Annual International Conference of the IEEE Engineering in Medicine & Biology Society, 2021

2020
An Easy-to-Use Socket-Suspension System Monitor for Lower Limb Amputees.
IEEE Trans. Instrum. Meas., 2020

2019
Identify Kinematic Features for Powered Prosthesis Tuning.
Proceedings of the 16th IEEE International Conference on Rehabilitation Robotics, 2019

2017
An Adaptive Classification Strategy for Reliable Locomotion Mode Recognition.
Sensors, 2017

Comparing parallel and sequential control parameter tuning for a powered knee prosthesis.
Proceedings of the 2017 IEEE International Conference on Systems, Man, and Cybernetics, 2017

2016
Tolerance of neural decoding errors for powered artificial legs: A pilot study.
Proceedings of the 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 2016

Adaptive control of powered transfemoral prostheses based on adaptive dynamic programming.
Proceedings of the 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 2016

Effect of environmental factors on level of trip disturbance: A simulation study.
Proceedings of the 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 2016

Does the impedance of above-knee powered prostheses need to be adjusted for load-carrying conditions?
Proceedings of the 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 2016

2015
Detection of critical errors of locomotion mode recognition for volitional control of powered transfemoral prostheses.
Proceedings of the 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 2015

2014
Improving Finite State Impedance Control of Active-Transfemoral Prosthesis Using Dempster-Shafer Based State Transition Rules.
J. Intell. Robotic Syst., 2014

2013
Design of an expert system to automatically calibrate impedance control for powered knee prostheses.
Proceedings of the IEEE 13th International Conference on Rehabilitation Robotics, 2013

2012
Toward Design of an Environment-Aware Adaptive Locomotion-Mode-Recognition System.
IEEE Trans. Biomed. Eng., 2012

Preliminary study of the effect of user intent recognition errors on volitional control of powered lower limb prostheses.
Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 2012

2011
Preliminary design of a terrain recognition system.
Proceedings of the 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 2011

2007
A practical system for online diagnosis of control valve faults.
Proceedings of the 46th IEEE Conference on Decision and Control, 2007


  Loading...