Nejila Parspour

Orcid: 0000-0003-0978-7447

According to our database1, Nejila Parspour authored at least 23 papers between 2004 and 2023.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

Online presence:

On csauthors.net:

Bibliography

2023
Design and Evaluation of a Spatially Distributed and Gear-Integrated Transverse Flux Machine.
IEEE Trans. Ind. Electron., 2023

Eddy Current Heating of Implanted Devices for Tumor Ablation: Numerical-Analytic Analysis and Optimization.
IEEE Access, 2023

A Communication-Based Synchronization and Control Method for Bidirectional Wireless Power Transfer System.
Proceedings of the 49th Annual Conference of the IEEE Industrial Electronics Society, 2023

Decomposition of Impedance Loci in WPT Systems Under Mutual Interference of Magnetic Flux Conductivity Using Möbius Transform.
Proceedings of the 49th Annual Conference of the IEEE Industrial Electronics Society, 2023

2022
Fault Diagnosis for Power Converter in SRM Drives Based on Current Prediction.
IEEE Trans. Ind. Electron., 2022

Analysis of Coil Configurations for a Contactless Thermal Tumor Ablation With Implanted Devices.
IEEE Trans. Biomed. Circuits Syst., 2022

Design and Scaling of Exoskeleton Power Units Considering Load Cycles of Humans.
Robotics, 2022

Heating Power of Millimeter-Sized Implanted Coils for Tumor Ablation: Numerical-Analytic Analysis and Optimization.
IEEE Access, 2022

The Insulation Resilience of Inverter-Fed Low Voltage Traction Machines: Review, Challenges, and Opportunities.
IEEE Access, 2022

Transverse Flux Machine - A Review.
IEEE Access, 2022

Validation of Fault-Tolerant Control of Converters under Open-Switch Faults on Connected Test Benches.
Proceedings of the IECON 2022, 2022

2021
An Online Switching Frequency Modulation for Power Fluctuation Minimization of Non-Stationary Wireless Power Transfer.
Proceedings of the IECON 2021, 2021

Design and Optimization of a Quadruple 3-Phase Permanent Magnet Assisted Synchronous Reluctance Machine.
Proceedings of the IECON 2021, 2021

Multi-Objective Optimization of a Quadruple 3-Phase Inductive Electrically Excited Synchronous Machine for 48V Traction Drives.
Proceedings of the IECON 2021, 2021

2020
FEA-Based Comparison of BLDC and BLAC Modes for an Axial Flux Motor with Trapezoidal BEMF.
Proceedings of the 46th Annual Conference of the IEEE Industrial Electronics Society, 2020

2019
Wireless Charging - A Multi Coil System for Different Ground Clearances.
IEEE Access, 2019

Online Calculation Method of Hysteresis Limits of a Direct Torque Control for a Switched Reluctance Machine.
Proceedings of the IECON 2019, 2019

Two-Dimensional Flux Tubes for the Analytical Modeling of the Magnetic Field Problems.
Proceedings of the IECON 2019, 2019

2018
Analytical modelling of a parametrized switched reluctance motor with adapting flux tube method.
Proceedings of the IEEE International Conference on Industrial Technology, 2018

2015
Torque-vectoring stability control of a four wheel drive electric vehicle.
Proceedings of the 2015 IEEE Intelligent Vehicles Symposium, 2015

2014
Torque Ripple Minimization Using Online Estimation of the Stator Resistances With Consideration of Magnetic Saturation.
IEEE Trans. Ind. Electron., 2014

2004
Robust output tracking of transverse flux machines using RBF neural network.
Proceedings of the 2004 IEEE Conference on Robotics, Automation and Mechatronics, 2004

Transverse flux machine for direct drive robots: modelling and analysis.
Proceedings of the 2004 IEEE Conference on Robotics, Automation and Mechatronics, 2004


  Loading...