Peter Sergeant
Orcid: 0000-0001-8601-7839
According to our database1,
Peter Sergeant
authored at least 42 papers
between 2010 and 2023.
Collaborative distances:
Collaborative distances:
Timeline
Legend:
Book In proceedings Article PhD thesis Dataset OtherLinks
Online presence:
-
on zbmath.org
-
on orcid.org
On csauthors.net:
Bibliography
2023
Design and Analysis of Electric Motor With Integrated Magnetic Spring for Cyclic Loads.
IEEE Trans. Ind. Electron., September, 2023
IEEE Trans. Ind. Electron., 2023
Dynamic Modeling and Analysis of Electric Motor With Integrated Magnetic Spring Driving Weaving Loom Application.
IEEE Trans. Ind. Electron., 2023
Rotor Layer Thickness and Arrangement for a 27 kW 100 krpm Axially Laminated Synchronous Reluctance Machine.
Proceedings of the 49th Annual Conference of the IEEE Industrial Electronics Society, 2023
PV-Grid Integrated Multifunctional Buck-boost On-board EV Charger with CCM-DCM Operation.
Proceedings of the 49th Annual Conference of the IEEE Industrial Electronics Society, 2023
Proceedings of the IEEE International Conference on Mechatronics, 2023
Sensitivity Analysis Framework for the Evaluation of Modular Drivetrain Architectures.
Proceedings of the IEEE/ASME International Conference on Advanced Intelligent Mechatronics, 2023
2022
Construction of Synchronous Reluctance Machines With Combined Star-Pentagon Configuration Using Standard Three-Phase Stator Frames.
IEEE Trans. Ind. Electron., 2022
Circulating-Current-Excited Switched Reluctance Generator System With Diode Rectifier.
IEEE Trans. Ind. Electron., 2022
IEEE Trans. Ind. Electron., 2022
Design of an Integrated DC-Link Structure for Reconfigurable Integrated Modular Motor Drives.
IEEE Trans. Ind. Electron., 2022
Hysteresis Loss in NdFeB Permanent Magnets in a Permanent Magnet Synchronous Machine.
IEEE Trans. Ind. Electron., 2022
Selection of Magnet Wire Topologies With Reduced AC Losses for the Windings of Electric Drivetrains.
IEEE Access, 2022
Proceedings of the 10th International Conference on Control, Mechatronics and Automation, 2022
2021
Simultaneous DC-Link and Stator Current Ripple Reduction With Interleaved Carriers in Multiphase Controlled Integrated Modular Motor Drives.
IEEE Trans. Ind. Electron., 2021
IEEE Trans. Ind. Electron., 2021
Proceedings of the IEEE/ASME International Conference on Advanced Intelligent Mechatronics, 2021
2020
Sizing Methodology Based on Scaling Laws for a Permanent Magnet Electrical Variable Transmission.
IEEE Trans. Ind. Electron., 2020
Performance Improvement of Existing Three Phase Synchronous Reluctance Machine: Stator Upgrading to 5-Phase With Combined Star-Pentagon Winding.
IEEE Access, 2020
Proceedings of the 46th Annual Conference of the IEEE Industrial Electronics Society, 2020
Energy Management Strategy Optimization for Application of an Electrical Variable Transmission System in a Hybrid Electric City Bus.
Proceedings of the Fifteenth International Conference on Ecological Vehicles and Renewable Energies, 2020
Distributed Control Strategies for Modular Permanent Magnet Synchronous Machines Taking Into Account Mutual Inductances.
Proceedings of the IEEE/ASME International Conference on Advanced Intelligent Mechatronics, 2020
2019
An Inverse Thermal Modeling Approach for Thermal Parameter and Loss Identification in an Axial Flux Permanent Magnet Machine.
IEEE Trans. Ind. Electron., 2019
A Simple and Efficient Quasi-3D Magnetic Equivalent Circuit for Surface Axial Flux Permanent Magnet Synchronous Machines.
IEEE Trans. Ind. Electron., 2019
Hybrid Photovoltaic-Thermoelectric Generator Powered Synchronous Reluctance Motor for Pumping Applications.
IEEE Access, 2019
Solar Array Fed Synchronous Reluctance Motor Driven Water Pump: An Improved Performance Under Partial Shading Conditions.
IEEE Access, 2019
Effect of Different Cutting Techniques on Magnetic Properties of Grain Oriented Steel Sheets and Axial Flux Machines.
Proceedings of the IECON 2019, 2019
Open-Phase Fault-Tolerant Current Reconstruction Control of Three-Phase Permanent Magnet Assisted Synchronous Reluctance Motors.
Proceedings of the 2019 IEEE Industry Applications Society Annual Meeting, Baltimore, MD, USA, September 29, 2019
An ECMS-based Approach for Energy Management of a HEV Equipped with an Electrical Variable Transmission.
Proceedings of the Fourteenth International Conference on Ecological Vehicles and Renewable Energies, 2019
2018
Efficiency of a CVT-Operated EVT Experimentally Evaluated Against Half-Toroidal and Push-Belt CVTs.
IEEE Trans. Ind. Electron., 2018
2017
IEEE Trans. Ind. Electron., 2017
Torque Analysis on a Double Rotor Electrical Variable Transmission With Hybrid Excitation.
IEEE Trans. Ind. Electron., 2017
Thermal parameter identification of an electrical machine using inverse modelling and non-collocated thermal sensors.
Proceedings of the 2017 IEEE SENSORS, Glasgow, United Kingdom, October 29, 2017
2016
Field-Oriented Control for an Induction-Machine-Based Electrical Variable Transmission.
IEEE Trans. Veh. Technol., 2016
Influence of stator slot openings on losses and torque in axial flux permanent magnet machines.
Math. Comput. Simul., 2016
Torque and torque components in high-speed permanent-magnet synchronous machines with a shielding cylinder.
Math. Comput. Simul., 2016
2015
Adding Inverter Fault Detection to Model-Based Predictive Control for Flying-Capacitor Inverters.
IEEE Trans. Ind. Electron., 2015
2014
Influence of the Amount of Permanent-Magnet Material in Fractional-Slot Permanent-Magnet Synchronous Machines.
IEEE Trans. Ind. Electron., 2014
2012
Rotor Geometry Design of Interior PMSMs With and Without Flux Barriers for More Accurate Sensorless Control.
IEEE Trans. Ind. Electron., 2012
2010
Comparison of analytical, finite element and neural network methods to study magnetic shielding.
Simul. Model. Pract. Theory, 2010
A sensorless PMSM drive using modified high-frequency test pulse sequences for the purpose of a discrete-time current controller with fixed sampling frequency.
Math. Comput. Simul., 2010