Ruqiang Yan

According to our database1, Ruqiang Yan authored at least 63 papers between 2004 and 2020.

Collaborative distances:
  • Dijkstra number2 of four.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Other 

Links

On csauthors.net:

Bibliography

2020
Sparse Multiperiod Group Lasso for Bearing Multifault Diagnosis.
IEEE Trans. Instrumentation and Measurement, 2020

Generalized Vold-Kalman Filtering for Nonstationary Compound Faults Feature Extraction of Bearing and Gear.
IEEE Trans. Instrumentation and Measurement, 2020

2019
Combination of DNN and Improved KNN for Indoor Location Fingerprinting.
Wireless Communications and Mobile Computing, 2019

Tacholess Speed Estimation in Order Tracking: A Review With Application to Rotating Machine Fault Diagnosis.
IEEE Trans. Instrumentation and Measurement, 2019

Deep Transfer Learning Based on Sparse Autoencoder for Remaining Useful Life Prediction of Tool in Manufacturing.
IEEE Trans. Industrial Informatics, 2019

Highly Accurate Machine Fault Diagnosis Using Deep Transfer Learning.
IEEE Trans. Industrial Informatics, 2019

A Deep Coupled Network for Health State Assessment of Cutting Tools Based on Fusion of Multisensory Signals.
IEEE Trans. Industrial Informatics, 2019

Spline adaptive filter with arctangent-momentum strategy for nonlinear system identification.
Signal Process., 2019

Centralized Energy-Efficient Clustering Routing Protocol for Mobile Nodes in Wireless Sensor Networks.
IEEE Communications Letters, 2019

Unsupervised Deep Transfer Learning for Intelligent Fault Diagnosis: An Open Source and Comparative Study.
CoRR, 2019

WaveletKernelNet: An Interpretable Deep Neural Network for Industrial Intelligent Diagnosis.
CoRR, 2019

Deep learning for fault diagnosis and prognosis in manufacturing systems.
Comput. Ind., 2019

Generative adversarial networks for data augmentation in machine fault diagnosis.
Comput. Ind., 2019

Bearing Degradation Evaluation Using Improved Cross Recurrence Quantification Analysis and Nonlinear Auto-Regressive Neural Network.
IEEE Access, 2019

ECG Arrhythmias Detection Using Auxiliary Classifier Generative Adversarial Network and Residual Network.
IEEE Access, 2019

Multi-objective Distributed Clustering Algorithm in Wireless Sensor Networks Using the Analytic Hierarchy Process.
Proceedings of the 20th IEEE/ACIS International Conference on Software Engineering, 2019

Blade Tip Timing: from Raw Data to Parameters Identification.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2019

Bearing Fault Diagnosis Based on Visual Symmetrized Dot Pattern and CNNs.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2019

2018
Learning Collaborative Sparsity Structure via Nonconvex Optimization for Feature Recognition.
IEEE Trans. Industrial Informatics, 2018

Machine Health Monitoring Using Local Feature-Based Gated Recurrent Unit Networks.
IEEE Trans. Industrial Electronics, 2018

Gear fault diagnosis based on recurrence network.
Journal of Intelligent and Fuzzy Systems, 2018

TC-39 measurements in power systems [Society News].
IEEE Instrum. Meas. Mag., 2018

Convolutional Auto-Encoder Based Deep Feature Learning for Finger-Vein Verification.
Proceedings of the 2018 IEEE International Symposium on Medical Measurements and Applications, 2018

Electric vehicle battery temperature measuring method based on magnetic nanoparticles.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2018

2017
Special Issue on The 2016 IEEE International Instrumentation and Measurement Technology Conference.
IEEE Trans. Instrumentation and Measurement, 2017

Convolutional Discriminative Feature Learning for Induction Motor Fault Diagnosis.
IEEE Trans. Industrial Informatics, 2017

Learning to Monitor Machine Health with Convolutional Bi-Directional LSTM Networks.
Sensors, 2017

Design and Implementation of a Hypothermic Machine Perfusion Device for Clinical Preservation of Isolated Organs.
Sensors, 2017

Bearing fault diagnosis using wavelet domain operator-based signal separation.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017

2016
A Novel Hybrid Error Criterion-Based Active Control Method for on-Line Milling Vibration Suppression with Piezoelectric Actuators and Sensors.
Sensors, 2016

Gearbox Fault Diagnosis in a Wind Turbine Using Single Sensor Based Blind Source Separation.
J. Sensors, 2016

Improving calibration accuracy of a vibration sensor through a closed loop measurement system.
IEEE Instrum. Meas. Mag., 2016

Instrumentation and measurement around the world: Region 10 [Guest Editorial].
IEEE Instrum. Meas. Mag., 2016

Wind turbine condition monitoring and fault diagnosis in China.
IEEE Instrum. Meas. Mag., 2016

Deep Learning and Its Applications to Machine Health Monitoring: A Survey.
CoRR, 2016

Induction motor fault diagnosis based on ensemble classifiers.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2016

A correlation-based approach to trustworthy sensing for cyber-physical systems.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2016

A sparse approach to fault severity classification for gearbox monitoring.
Proceedings of the 19th International Conference on Information Fusion, 2016

2015
Remaining Useful Life Prediction of Rolling Bearings Using an Enhanced Particle Filter.
IEEE Trans. Instrumentation and Measurement, 2015

Sparse Feature Identification Based on Union of Redundant Dictionary for Wind Turbine Gearbox Fault Diagnosis.
IEEE Trans. Industrial Electronics, 2015

The IEEE IMS Chapter Nanjing/Shanghai/Wuhan Jt. sections.
IEEE Instrum. Meas. Mag., 2015

Rolling Bearing Fault Diagnosis Based on Wavelet Packet Decomposition and Multi-Scale Permutation Entropy.
Entropy, 2015

Induction motor fault diagnosis using multiple class feature selection.
Proceedings of the 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2015

2014
Bearing Degradation Evaluation Using Recurrence Quantification Analysis and Kalman Filter.
IEEE Trans. Instrumentation and Measurement, 2014

Wavelets for fault diagnosis of rotary machines: A review with applications.
Signal Process., 2014

Time-frequency methods for condition based maintenance and modal analysis.
Signal Process., 2014

2013
Energy-Aware Sensor Node Design With Its Application in Wireless Sensor Networks.
IEEE Trans. Instrumentation and Measurement, 2013

A 3-D Reconstruction Solution to Current Density Imaging Based on Acoustoelectric Effect by Deconvolution: A Simulation Study.
IEEE Trans. Biomed. Engineering, 2013

EOG Artifact Correction from EEG Recording Using Stationary Subspace Analysis and Empirical Mode Decomposition.
Sensors, 2013

Bearing performance degradation evaluation using recurrence quantification analysis and auto-regression model.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

Pulse signal analysis based on wavelet packet transform and hidden Markov model estimation.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

2012
Variable-Word-Length Coding for Energy-Aware Signal Transmission.
IEEE Trans. Instrumentation and Measurement, 2012

Noise-assisted data processing in measurement science: Part two.
IEEE Instrum. Meas. Mag., 2012

Noise-assisted data processing in measurement science: Part one part 40 in a series of tutorials on instrumentation and measurement.
IEEE Instrum. Meas. Mag., 2012

2011
Prognosis of Defect Propagation Based on Recurrent Neural Networks.
IEEE Trans. Instrumentation and Measurement, 2011

2010
Correlation Dimension Analysis: A Non-linear Time Series Analysis for Data Processing.
IEEE Instrum. Meas. Mag., 2010

2009
Energy-Based Feature Extraction for Defect Diagnosis in Rotary Machines.
IEEE Trans. Instrumentation and Measurement, 2009

Base Wavelet Selection for Bearing Vibration Signal Analysis.
IJWMIP, 2009

Rolling bearing defect severity assessment under varying operating conditions.
IJMR, 2009

2006
Hilbert-Huang Transform-Based Vibration Signal Analysis for Machine Health Monitoring.
IEEE Trans. Instrumentation and Measurement, 2006

Non-stationary signal processing for bearing health monitoring.
IJMR, 2006

A Neural Network Approach to Bearing Health Assessment.
Proceedings of the International Joint Conference on Neural Networks, 2006

2004
Complexity as a measure for machine health evaluation.
IEEE Trans. Instrumentation and Measurement, 2004


  Loading...