Tadanao Zanma

According to our database1, Tadanao Zanma authored at least 28 papers between 1996 and 2022.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of five.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Other 

Links

Online presence:

On csauthors.net:

Bibliography

2022
A Coordinated Control Method for Integrated System of Wind Farm and Hydrogen Production: Kinetic Energy and Virtual Discharge Controls.
IEEE Access, 2022

2020
Cruise Control for a Two-Wheeled Mobile Vehicle Using Its Mixed Logical Dynamical System Model.
IEEE Trans. Ind. Informatics, 2020

Improved Robust Performance Design for Passive Uncertain Systems - Active Use of the Uncertainty Phase and Gain.
IEEE Trans. Ind. Electron., 2020

Full Converter Control for Variable-Speed Wind Turbines Without Integral Controller or PLL.
IEEE Trans. Ind. Electron., 2020

Set-Based State Estimation in Quantized State Feedback Control Systems With Quantized Measurements.
IEEE Trans. Control. Syst. Technol., 2020

2019
A Control-Theoretic Approach for Cell Zooming of Energy Harvesting Small Cell Networks.
IEEE Trans. Green Commun. Netw., 2019

Observer-Based Stabilization of Systems With Quantized Inputs and Outputs.
IEEE Trans. Autom. Control., 2019

Stator resistance identification for induction motors using DyCE principle based adaptive flux observer.
Proceedings of the IECON 2019, 2019

Online Sensor Transmission Scheduling of Networked Control Systems.
Proceedings of the 2019 IEEE Conference on Control Technology and Applications, 2019

2018
Model Predictive Cell Zooming for Energy-Harvesting Small Cell Networks.
Proceedings of the 2018 IEEE International Conference on Communications, 2018

2017
Optimal Input and Quantization Interval for Quantized Feedback System With Variable Quantizer.
IEEE Trans. Ind. Electron., 2017

Quantized output feedback stabilization by Luenberger observers.
CoRR, 2017

2016
Optimal dynamic quantizer and input in quantized feedback control system.
Proceedings of the IECON 2016, 2016

Optimal plant data transmission in networked control systems.
Proceedings of the IECON 2016, 2016

2015
Economic operation of smart grid based on the statistics of renewable energy.
Proceedings of the 2015 IEEE Innovative Smart Grid Technologies, 2015

Model predictive current control for PMSM considering trade-off between current ripple and number of switching operations.
Proceedings of the 10th Asian Control Conference, 2015

Optimal formation control of two-wheeled vehicles using model predictive control.
Proceedings of the 10th Asian Control Conference, 2015

2014
Tracking control of optimal quantization feedback control systems with variable discrete quantizer.
Proceedings of the IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society, Dallas, TX, USA, October 29, 2014

Optimal quantization feedback control with variable discrete quantizer.
Proceedings of the IEEE 13th International Workshop on Advanced Motion Control, 2014

State estimation in quantized feedback control system.
Proceedings of the IEEE 13th International Workshop on Advanced Motion Control, 2014

Compensation of networked control systems with time-delay.
Proceedings of the IEEE 13th International Workshop on Advanced Motion Control, 2014

2013
Optimal control for networked control systems with stochastic data dropout.
Proceedings of the IECON 2013, 2013

2012
Dead-time compensation in model predictive instantaneous-current control.
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012

2010
Optimal tracking control of two-wheeled mobile robots based on model predictive control.
Proceedings of the 11th IEEE International Workshop on Advanced Motion Control, 2010

Quantized Feedback Stabilization of Linear Discrete-time Systems with State/Input Constraints.
Proceedings of the IEEE International Conference on Control Applications, 2010

2005
Identification of switched systems with unknown switch points and its application.
Proceedings of the IEEE International Conference on Systems, 2005

2004
A small iron ball position control by symbolic input and output.
Proceedings of the 2004 IEEE Conference on Robotics, Automation and Mechatronics, 2004

1996
Learning control of disassembly Petri net-an approach with discrete event system theory.
Proceedings of the 1996 IEEE International Conference on Robotics and Automation, 1996


  Loading...