Teresa Orlowska-Kowalska

Orcid: 0000-0002-4592-5336

According to our database1, Teresa Orlowska-Kowalska authored at least 60 papers between 2002 and 2024.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

Online presence:

On csauthors.net:

Bibliography

2024
Implementation of MLP-Based Classifier of Current Sensor Faults in Vector-Controlled Induction Motor Drive.
IEEE Trans. Ind. Informatics, April, 2024

Adaptive High Gain Observer Based MRAS for Sensorless Induction Motor Drives.
IEEE Trans. Ind. Electron., 2024

2023
PMSM Stator Winding Fault Detection and Classification Based on Bispectrum Analysis and Convolutional Neural Network.
IEEE Trans. Ind. Electron., 2023

2022
Detection of Permanent Magnet Damage of PMSM Drive Based on Direct Analysis of the Stator Phase Currents Using Convolutional Neural Network.
IEEE Trans. Ind. Electron., 2022

Postfault Direct Field-Oriented Control of Induction Motor Drive Using Adaptive Virtual Current Sensor.
IEEE Trans. Ind. Electron., 2022

Influence of Parameter Uncertainty to Stator Current Reconstruction Using Modified Luenberger Observer for Current Sensor Fault-Tolerant Induction Motor Drive.
Sensors, 2022

Effectiveness of Neural Fault Detectors of Permanent Magnet Synchronous Motor Trained With Symptoms From Field-Circuit Modeling.
IEEE Access, 2022

Fault Diagnosis and Fault-Tolerant Control of PMSM Drives-State of the Art and Future Challenges.
IEEE Access, 2022

Neural Network-Based Classification of Current Sensor Failures in Fault-Tolerant Control Induction Motor Drive.
Proceedings of the IECON 2022, 2022

2020
Simple Stability Enhancement Method for Stator Current Error-Based MRAS-Type Speed Estimator for Induction Motor.
IEEE Trans. Ind. Electron., 2020

2019
Stability Improvement Methods of the Adaptive Full-Order Observer for Sensorless Induction Motor Drive - Comparative Study.
IEEE Trans. Ind. Informatics, 2019

Virtual Current Sensor in the Fault-Tolerant Field-Oriented Control Structure of an Induction Motor Drive.
Sensors, 2019

2018
Equivalent-Signal-Based Sliding Mode Speed MRAS-Type Estimator for Induction Motor Drive Stable in the Regenerating Mode.
IEEE Trans. Ind. Electron., 2018

Stability of a New Adaptive Full-Order Observer with an Auxiliary Variable.
Proceedings of the 27th IEEE International Symposium on Industrial Electronics, 2018

2017
Stability Analysis of Selected Speed Estimators for Induction Motor Drive in Regenerating Mode - A Comparative Study.
IEEE Trans. Ind. Electron., 2017

Faults diagnosis and control in a low-cost fault-tolerant induction motor drive system.
Math. Comput. Simul., 2017

Fault tolerant sliding mode direct torque control of induction motor with inverter reconfiguration.
Proceedings of the 26th IEEE International Symposium on Industrial Electronics, 2017

IGBT open-circuit fault diagnosis based on the voltage estimation in the line-side AC/DC converter.
Proceedings of the 26th IEEE International Symposium on Industrial Electronics, 2017

Dependence of the adaptive full-order observer stability on parameter identification errors.
Proceedings of the 26th IEEE International Symposium on Industrial Electronics, 2017

Voltage space vector modulation technique for the inverter fault-tolerant motor drive systems.
Proceedings of the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, October 29, 2017

Open switch fault diagnosis methods for an AC/DC line-side converter.
Proceedings of the IEEE International Conference on Industrial Technology, 2017

IGBT open-circuit fault diagnosis based on the current prediction in the line-side AC/DC converter.
Proceedings of the IEEE International Conference on Industrial Technology, 2017

2016
Online Stator Interturn Short Circuits Monitoring in the DFOC Induction-Motor Drive.
IEEE Trans. Ind. Electron., 2016

Stator fault monitoring based on internal signals of vector controlled induction motor drives.
Proceedings of the IECON 2016, 2016

A stator-flux-based diagnostic method for IGBT open-circuit faults in an induction motor drive.
Proceedings of the IECON 2016, 2016

2015
Adaptive neural speed controllers applied for a drive system with an elastic mechanical coupling - A comparative study.
Eng. Appl. Artif. Intell., 2015

An on-line trained neural controller with a fuzzy learning rate of the Levenberg-Marquardt algorithm for speed control of an electrical drive with an elastic joint.
Appl. Soft Comput., 2015

Multiple transistor open-circuit faults diagnosis in a vector-controlled induction motor drive.
Proceedings of the IEEE International Conference on Industrial Technology, 2015

Predictive flux and torque control of induction motor drive under post-fault operation of three-phase voltage inverter.
Proceedings of the IEEE International Conference on Industrial Technology, 2015

Application of the modified fuzzy Kalman filter to states estimation of the two-mass system.
Proceedings of the IEEE International Conference on Industrial Technology, 2015

2014
Influence of the optimization methods on neural state estimation quality of the drive system with elasticity.
Neural Comput. Appl., 2014

Sliding-mode direct torque control and sliding-mode observer with a magnetizing reactance estimator for the field-weakening of the induction motor drive.
Math. Comput. Simul., 2014

Application of a time-varying switching line in the cascade sliding-mode speed control of the induction motor drive.
Proceedings of the 23rd IEEE International Symposium on Industrial Electronics, 2014

2013
FPGA Implementation of ADALINE-Based Speed Controller in a Two-Mass System.
IEEE Trans. Ind. Informatics, 2013

Industrial Applications of the Kalman Filter: A Review.
IEEE Trans. Ind. Electron., 2013

Application of neural network with adaptive interaction for speed control of the drive system with elastic joint.
Proceedings of the 22nd IEEE International Symposium on Industrial Electronics, 2013

Integral Sliding Mode Direct Torque Control of the induction motor drives.
Proceedings of the IECON 2013, 2013

Simple sensorless diagnosis method for open-switch faults in SVM-VSI-fed induction motor drive.
Proceedings of the IECON 2013, 2013

Speed Sensorless Induction Motor Drive System with MRAS Type Speed and Flux Estimator and Additional Parameter Identification.
Proceedings of the 11th IFAC International Workshop on Adaptation and Learning in Control and Signal Processing, 2013

2012
Application of the Kalman Filters to the High-Performance Drive System With Elastic Coupling.
IEEE Trans. Ind. Electron., 2012

Optimum Trajectory Control of the Current Vector of a Nonsalient-Pole PMSM in the Field-Weakening Region.
IEEE Trans. Ind. Electron., 2012

Introduction to the Special Section on Industrial Applications and Implementation Issues of the Kalman Filter.
IEEE Trans. Ind. Electron., 2012

2011
FPGA Implementation of the Multilayer Neural Network for the Speed Estimation of the Two-Mass Drive System.
IEEE Trans. Ind. Informatics, 2011

Robust model predictive speed control of the drive system with an elastic joint.
Proceedings of EUROCON 2011, 2011

Performance analysis of the sensorless induction motor drive system under faulted conditions.
Proceedings of EUROCON 2011, 2011

Application of radial basis neural networks for the rotor fault detection of the induction motor.
Proceedings of EUROCON 2011, 2011

2010
Implementation of a Sliding-Mode Controller With an Integral Function and Fuzzy Gain Value for the Electrical Drive With an Elastic Joint.
IEEE Trans. Ind. Electron., 2010

Adaptive Sliding-Mode Neuro-Fuzzy Control of the Two-Mass Induction Motor Drive Without Mechanical Sensors.
IEEE Trans. Ind. Electron., 2010

Stator-Current-Based MRAS Estimator for a Wide Range Speed-Sensorless Induction-Motor Drive.
IEEE Trans. Ind. Electron., 2010

2009
Indirect Adaptive Control of Induction Motor Drive System With an Elastic Coupling.
IEEE Trans. Ind. Electron., 2009

Effectiveness of Saliency-Based Methods in Optimization of Neural State Estimators of the Drive System With Elastic Couplings.
IEEE Trans. Ind. Electron., 2009

Constrained Model Predictive Control of the Drive System With Mechanical Elasticity.
IEEE Trans. Ind. Electron., 2009

Application of the OBD method for optimization of neural state variable estimators of the two-mass drive system.
Neurocomputing, 2009

2008
Damping of Torsional Vibrations in Two-Mass System Using Adaptive Sliding Neuro-Fuzzy Approach.
IEEE Trans. Ind. Informatics, 2008

Performance Improvement of Industrial Drives With Mechanical Elasticity Using Nonlinear Adaptive Kalman Filter.
IEEE Trans. Ind. Electron., 2008

2007
Vibration Suppression in a Two-Mass Drive System Using PI Speed Controller and Additional Feedbacks - Comparative Study.
IEEE Trans. Ind. Electron., 2007

Neural-Network Application for Mechanical Variables Estimation of a Two-Mass Drive System.
IEEE Trans. Ind. Electron., 2007

Control of the Drive System With Stiff and Elastic Couplings Using Adaptive Neuro-Fuzzy Approach.
IEEE Trans. Ind. Electron., 2007

2003
Neural networks application for induction motor faults diagnosis.
Math. Comput. Simul., 2003

2002
The influence of parameters and structure of PI-type fuzzy-logic controller on DC drive system dynamics.
Fuzzy Sets Syst., 2002


  Loading...