V. Fernão Pires

Orcid: 0000-0002-3764-0955

Affiliations:
  • Instituto Politécnico de Setúbal, Setúbal, Portugal
  • Center for Innovation in Electrical and Energy Engineering (CIEEE), Lisbon, Portugal


According to our database1, V. Fernão Pires authored at least 59 papers between 2002 and 2023.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

Online presence:

On csauthors.net:

Bibliography

2023
Coupling Analysis of Differential Power Processing-Based PV System and Its Decoupling Implementation of Synchronous MPPT Control.
IEEE Trans. Ind. Electron., July, 2023

A DC-DC Converter Based on a Single-Switch Topology with Buck-Boost Wide Voltage Gain.
Proceedings of the 49th Annual Conference of the IEEE Industrial Electronics Society, 2023

2022
Bidirectional DC-DC Converter for Battery Storage Systems with Support for Mitigation of Voltage Imbalance in Bipolar DC Microgrids.
Proceedings of the IECON 2022, 2022

Interlink Converter for Hybrid AC to Bipolar DC Microgrid or to Two DC Microgrids.
Proceedings of the IECON 2022, 2022

Mutilevel Bipolar Back-to-Back HVDC Transmission System Based on the Dual Inverter Converter Structure with Model Predictive Control.
Proceedings of the IECON 2022, 2022

3L-T-type qZSI as Grid-Forming Unit in ac Microgrid.
Proceedings of the IECON 2022, 2022

A Three-Phase On-Board Integrated Battery Charger for EVs using a Drive Based on Triple Inverters.
Proceedings of the IECON 2022, 2022

2021
Dual Output and High Voltage Gain DC-DC Converter for PV and Fuel Cell Generators Connected to DC Bipolar Microgrids.
IEEE Access, 2021

Development of an off-grid micro-inverter for a scalable photovoltaic kit.
Proceedings of the 30th IEEE International Symposium on Industrial Electronics, 2021

Energy Routers in Transactive Energy Communities.
Proceedings of the 22nd IEEE International Conference on Industrial Technology, 2021

Control of PV Distributed Systems Based on Three-Phase Triple Inverters to Support Grids with Unbalanced Loads.
Proceedings of the 19th IEEE International Conference on Smart Technologies, 2021

2020
A Multilevel Fault-Tolerant Power Converter for a Switched Reluctance Machine Drive.
IEEE Access, 2020

2019
High Step-Up DC-DC Converter for Fuel Cell Vehicles Based on Merged Quadratic Boost-Ćuk.
IEEE Trans. Veh. Technol., 2019

The HVDC Dual Transmission System Under DC Short-Circuit Faults.
Proceedings of the 28th IEEE International Symposium on Industrial Electronics, 2019

Multilevel Converter Fed SRM Drive for Single Stage PV Array Based Water Pumping.
Proceedings of the IECON 2019, 2019

A novel spilt-winding fault-tolerant approach for a Switched Reluctance Motor.
Proceedings of the IECON 2019, 2019

A Model Predictive Control for the T-Type qZS Inverter with Capacitor Imbalance Compensation.
Proceedings of the IECON 2019, 2019

Fault-Tolerant Design of Three-phase Dual-Buck VSI Topologies.
Proceedings of the IECON 2019, 2019

2018
Combining local and remote laboratories for the interactive learning of industrial automation.
Comput. Appl. Eng. Educ., 2018

Laboratory Setup for Induction Motor Fault Detection Teaching.
Proceedings of the 27th IEEE International Symposium on Industrial Electronics, 2018

A Quasi-Z-Source Converter to Feed a Switched Reluctance Drive with Multilevel Voltages.
Proceedings of the IECON 2018, 2018

2017
Controlling a battery energy storage system to support residential photovoltaic installations.
Proceedings of the 26th IEEE International Symposium on Industrial Electronics, 2017

PV generators combined with UPQC based on a dual converter structure.
Proceedings of the 26th IEEE International Symposium on Industrial Electronics, 2017

Teaching distribution network protection through the support of a software tool.
Proceedings of the 26th IEEE International Symposium on Industrial Electronics, 2017

Modbus Protocol as Gateway Between Different Fieldbus Devices - a Didactic Approach.
Proceedings of the Teaching and Learning in a Digital World - Proceedings of the 20th International Conference on Interactive Collaborative Learning, 2017

Industrial Automation Self-learning Through the Development of Didactic Industrial Processes.
Proceedings of the Teaching and Learning in a Digital World - Proceedings of the 20th International Conference on Interactive Collaborative Learning, 2017

2016
A computer based system for the teaching of fault diagnosis in power electronic inverters.
Proceedings of the 25th IEEE International Symposium on Industrial Electronics, 2016

Impact of Self-consumption and Storage in Low Voltage Distribution Networks: An Economic Outlook.
Proceedings of the Technological Innovation for Cyber-Physical Systems, 2016

A grid-connected PV system based on a four wire dual-buck inverter with ancillary services support.
Proceedings of the IECON 2016, 2016

2015
Multiobjective planning of distribution networks incorporating switches and protective devices using a memetic optimization.
Reliab. Eng. Syst. Saf., 2015

Automating remote grid acceptance and energy services tests suited for large deployments of PV systems in active distribution networks.
Proceedings of the IECON 2015, 2015

A new teaching tool to enhance power quality assessment.
Proceedings of the IECON 2015, 2015

Multiobjective switching devices placement considering environmental constrains in distribution networks with distributed energy resources.
Proceedings of the IEEE International Conference on Industrial Technology, 2015

2014
Hybrid low-power Wind Generation and PV gridconnected system with HPC, PC and MPPT control.
Proceedings of the 23rd IEEE International Symposium on Industrial Electronics, 2014

Controlling a grid-connected T-type three level inverter system using a sliding mode approach.
Proceedings of the 23rd IEEE International Symposium on Industrial Electronics, 2014

Power quality and long life education.
Proceedings of the 23rd IEEE International Symposium on Industrial Electronics, 2014

A new teaching tool for fault detection in the induction machine.
Proceedings of the 23rd IEEE International Symposium on Industrial Electronics, 2014

Application of NSGA-II Algorithm to Multiobjective Optimization of Switching Devices Placement in Electric Power Distribution Systems.
Proceedings of the Technological Innovation for Collective Awareness Systems, 2014

A ZigBee wireless domotic system with Bluetooth interface.
Proceedings of the IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society, Dallas, TX, USA, October 29, 2014

2013
Fault Detection and Diagnosis in Induction Machines: A Case Study.
Proceedings of the Technological Innovation for the Internet of Things, 2013

Low-power wind generation grid-connected system with MPPT and PC control.
Proceedings of the IECON 2013, 2013

2012
Development of an experimental system for teaching induction motors with fault detection and diagnosis capabilities.
Comput. Appl. Eng. Educ., 2012

A computer-based testing system to evaluate protective relays as a tool in power system protection education.
Comput. Appl. Eng. Educ., 2012

Fault detection and diagnosis of grid-connected power inverters using PCA and current mean value.
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012

The application of S-transform in fault detection and diagnosis of grid-connected power inverters.
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012

2011
Induction motor fault detection and diagnosis using a current state space pattern recognition.
Pattern Recognit. Lett., 2011

Power quality disturbances classification using the 3-D space representation and PCA based neuro-fuzzy approach.
Expert Syst. Appl., 2011

Phase-locked loop topology based on a synchronous reference frame and sliding mode approach for DVR applications.
Proceedings of EUROCON 2011, 2011

Dynamic voltage restorer using a multilevel converter with a novel cell structure.
Proceedings of EUROCON 2011, 2011

2010
An Analog Electronics Mobile Course with a Competitive Learning Approach.
Int. J. Interact. Mob. Technol., 2010

2009
A Remote Laboratory Environment for Manipulative Therapy Learning.
Int. J. Online Eng., 2009

2008
Distance-Learning Power-System Protection Based on Testing Protective Relays.
IEEE Trans. Ind. Electron., 2008

2007
Unsupervised Neural-Network-Based Algorithm for an On-Line Diagnosis of Three-Phase Induction Motor Stator Fault.
IEEE Trans. Ind. Electron., 2007

2006
An Approach to Improve the Interpretability of Neuro-Fuzzy Systems.
Proceedings of the IEEE International Conference on Fuzzy Systems, 2006

2005
Three-phase single-stage four-switch PFC buck-boost-type rectifier.
IEEE Trans. Ind. Electron., 2005

Autonomous Landing of an Unmanned Aerial Vehicle.
Proceedings of the 2005 International Conference on Computational Intelligence for Modelling Control and Automation (CIMCA 2005), 2005

2004
EDBI - An E-Learning Based Project to Improve Engineering Teaching.
Proceedings of the e-learning and Virtual and Remote Laboratories, 2004

2003
Advanced control methods for power electronics systems.
Math. Comput. Simul., 2003

2002
Teaching nonlinear modeling, simulation, and control of electronic power converters using MATLAB/SIMULINK.
IEEE Trans. Educ., 2002


  Loading...