Wei Xu
According to our database1,
Wei Xu
authored at least 45 papers
between 2010 and 2021.
Collaborative distances:
Collaborative distances:
Timeline
Legend:
Book In proceedings Article PhD thesis OtherLinks
Online presence:
-
on orcid.org
On csauthors.net:
Bibliography
2021
No-Load Performance Analysis of an Asymmetric-Pole Single-Phase Doubly Salient Permanent Magnet Machine.
IEEE Trans. Ind. Electron., 2021
MTPA-Based Finite-Set Model Predictive Control Without Weighting Factors for Linear Induction Machine.
IEEE Trans. Ind. Electron., 2021
2020
Simplified Model Predictive Thrust Control Based Arbitrary Two Voltage Vectors for Linear Induction Machines in Metro Transportation.
IEEE Trans. Veh. Technol., 2020
IEEE Trans. Veh. Technol., 2020
Effects of Design Parameters on the Multiphysics Performance of High-Speed Permanent Magnet Machines.
IEEE Trans. Ind. Electron., 2020
IEEE Trans. Ind. Electron., 2020
Bearing Corrosion Failure Diagnosis of Doubly Fed Induction Generator in Wind Turbines Based on Stator Current Analysis.
IEEE Trans. Ind. Electron., 2020
Fault-Tolerant Analysis and Design of AFPMSM With Multi-Disc Type Coreless Open-End Winding.
IEEE Access, 2020
IEEE Access, 2020
IEEE Access, 2020
2019
Improved Continuous Fast Terminal Sliding Mode Control With Extended State Observer for Speed Regulation of PMSM Drive System.
IEEE Trans. Veh. Technol., 2019
Finite-Set Model Predictive Control Based Thrust Maximization of Linear Induction Motors Used in Linear Metros.
IEEE Trans. Veh. Technol., 2019
Investigation of a High-Frequency Pulsed Alternator Integrating Motor and Alternator.
IEEE Trans. Ind. Electron., 2019
Improved Coordinated Control of Standalone Brushless Doubly Fed Induction Generator Supplying Nonlinear Loads.
IEEE Trans. Ind. Electron., 2019
Sensorless Control of Standalone Brushless Doubly Fed Induction Generator Feeding Unbalanced Loads in a Ship Shaft Power Generation System.
IEEE Trans. Ind. Electron., 2019
An Improved Third-Order Generalized Integral Flux Observer for Sensorless Drive of PMSMs.
IEEE Trans. Ind. Electron., 2019
IEEE Trans. Ind. Electron., 2019
2018
Improved Deadbeat Predictive Current Control Combined Sliding Mode Strategy for PMSM Drive System.
IEEE Trans. Veh. Technol., 2018
An Improved Speed Sensorless Control Strategy for Linear Induction Machines Based on Extended State Observer for Linear Metro Drives.
IEEE Trans. Veh. Technol., 2018
Hierarchically Adaptive Frequency Control for an EV-Integrated Smart Grid With Renewable Energy.
IEEE Trans. Ind. Informatics, 2018
Low-Complexity Finite Control Set Model Predictive Control With Current Limit for Linear Induction Machines.
IEEE Trans. Ind. Electron., 2018
Accelerating the Optimal Shape Design of Linear Machines by Transient Simulation Using Mesh Deformation and Mesh Connection Techniques.
IEEE Trans. Ind. Electron., 2018
Comparative Study of Transversal-Flux Permanent-Magnetic Linear Oscillatory Machines for Compressor.
IEEE Trans. Ind. Electron., 2018
IEEE Trans. Ind. Electron., 2018
IEEE Trans. Ind. Electron., 2018
IEEE Trans. Ind. Electron., 2018
IEEE Trans. Ind. Electron., 2018
IEEE Trans. Ind. Electron., 2018
2017
Multistep Model Predictive Control With Current and Voltage Constraints for Linear Induction Machine Based Urban Transportation.
IEEE Trans. Veh. Technol., 2017
Fabrication and Experimental Analysis of an Axially Laminated Flux-Switching Permanent-Magnet Machine.
IEEE Trans. Ind. Electron., 2017
Optimal current reference with maximum thrust criterion for linear induction machine based deadbeat control.
Proceedings of the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, October 29, 2017
Proceedings of the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, October 29, 2017
Model predictive current control of brushless doubly-fed machine for stand-alone power generation system.
Proceedings of the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, October 29, 2017
New control strategy of stand-alone brushless doubly-fed induction generator for supplying unbalanced loads in ship shaft power generation system.
Proceedings of the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, October 29, 2017
Proceedings of the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, October 29, 2017
Proceedings of the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, October 29, 2017
2016
Fast sliding mode control on air-breathing hypersonic vehicles with transient response analysis.
J. Syst. Control. Eng., 2016
J. Frankl. Inst., 2016
A new optimization methodology of the linear generator for wave energy conversion systems.
Proceedings of the IEEE International Conference on Industrial Technology, 2016
Improved direct torque control based modified torque controller for surface-mounted permanent magnet synchronous machines.
Proceedings of the IEEE International Conference on Industrial Technology, 2016
2015
A permanent magnet traction machine with wide high efficiency range for EV application.
Proceedings of the IECON 2015, 2015
Nonsingular terminal sliding mode control for the speed regulation of permanent magnet synchronous motor with parameter uncertainties.
Proceedings of the IECON 2015, 2015
2014
A continuous sliding mode controller for the PMSM speed regulation based on disturbance observer.
Proceedings of the IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society, Dallas, TX, USA, October 29, 2014
2011
A Simple Method to Reduce Torque Ripple in Direct Torque-Controlled Permanent-Magnet Synchronous Motor by Using Vectors With Variable Amplitude and Angle.
IEEE Trans. Ind. Electron., 2011
2010
IEEE Trans. Veh. Technol., 2010