Wei Xu
Orcid: 0000-0003-0816-6016Affiliations:
- Huazhong University of Science and Technology, School of Electrical and Electronic Engineering, Wuhan, China
- University of Technology Sydney, Faculty of Engineering and Information Technology, Australia (former)
- Chinese Academy of Sciences, Institute of Electrical Engineering, Beijing, China (PhD 2008)
According to our database1,
Wei Xu
authored at least 85 papers
between 2010 and 2024.
Collaborative distances:
Collaborative distances:
Timeline
Legend:
Book In proceedings Article PhD thesis Dataset OtherLinks
Online presence:
-
on orcid.org
On csauthors.net:
Bibliography
2024
Improved Position Sensorless Resonant Frequency Tracking Control Method for Linear Oscillatory Machine.
IEEE Trans. Ind. Electron., April, 2024
Design and Test of a Less-Rare-Earth Stator-Magnet Moving-Iron Transverse-Flux Linear Oscillatory Machine for Reciprocating Drive.
IEEE Trans. Ind. Electron., March, 2024
2023
Modeling and Transient Response Analysis of Doubly-Fed Variable Speed Pumped Storage Unit in Pumping Mode.
IEEE Trans. Ind. Electron., October, 2023
Torque Ripple Suppression for Standalone Brushless Doubly-Fed Induction Generator-DC System Based on Power Winding Harmonic Current Control.
IEEE Trans. Ind. Electron., September, 2023
Improved Loss Minimization Control Based on Time-Harmonic Equivalent Circuit for Linear Induction Motors Adopted to Linear Metro.
IEEE Trans. Veh. Technol., July, 2023
Low-Complexity Multistep Sequential Model Predictive Current Control for Three-Level Inverter-Fed Linear Induction Machines.
IEEE Trans. Ind. Electron., June, 2023
A Practical Analytical Expression and Estimation for Average Torque of High Saturation Permanent Magnet Synchronous Motor for Special Vehicles.
IEEE Trans. Veh. Technol., 2023
Research on Electrical Contact Characteristics of Brush-Rail Device With Transient Large Current.
IEEE Access, 2023
Thrust Ripple Suppression of LIM Based on Feedback Linearization and Full-Order Terminal Sliding Mode Control.
Proceedings of the 49th Annual Conference of the IEEE Industrial Electronics Society, 2023
2022
Adaptive Full-Order Displacement Observer for Sensorless Resonant Frequency Tracking Control of Linear Oscillatory Machines.
IEEE Trans. Ind. Electron., 2022
Novel Equivalent Circuit Model Applicable to All Operation Modes for Brushless Doubly Fed Induction Machines.
IEEE Trans. Ind. Electron., 2022
IEEE Access, 2022
A Comprehensive Review of Grid-Connected PV Systems Based on Impedance Source Inverter.
IEEE Access, 2022
Proceedings of the IEEE International Conference on Industrial Technology, 2022
Proceedings of the IEEE International Conference on Industrial Technology, 2022
2021
IEEE Trans. Veh. Technol., 2021
No-Load Performance Analysis of an Asymmetric-Pole Single-Phase Doubly Salient Permanent Magnet Machine.
IEEE Trans. Ind. Electron., 2021
3-D Modeling and Testing of a Stator-Magnet Transverse-Flux Linear Oscillatory Machine for Direct Compressor Drive.
IEEE Trans. Ind. Electron., 2021
An Improved Control Method for Standalone Brushless Doubly Fed Induction Generator Under Unbalanced and Nonlinear Loads Using Dual-Resonant Controller.
IEEE Trans. Ind. Electron., 2021
MTPA-Based Finite-Set Model Predictive Control Without Weighting Factors for Linear Induction Machine.
IEEE Trans. Ind. Electron., 2021
IEEE Access Special Section Editorial: Advanced Energy Conversion Systems Based on Multi-Port Electrical Machines.
IEEE Access, 2021
Composite Speed Control of PMSM Drive System Based on Finite Time Sliding Mode Observer.
IEEE Access, 2021
Dynamic Performance Enhancement Method Based on Improved Model Reference Adaptive System for SPMSM Sensorless Drives.
IEEE Access, 2021
Interleaved Ultra-High Step-Up DC-DC Converters With Extendable Voltage Gains and ZVS Performance.
IEEE Access, 2021
IEEE Access, 2021
Recent Achievements in Model Predictive Control Techniques for Industrial Motor: A Comprehensive State-of-the-Art.
IEEE Access, 2021
Fractional kVA Rating PWM Converter Doubly Fed Variable Speed Electric Generator Systems: An Overview in 2020.
IEEE Access, 2021
Full-order Terminal Sliding mode Control for Virtual Synchronous Generator based Inverter.
Proceedings of the IECON 2021, 2021
Fault Analysis and Diagnosis for Induction Motor Based on Hilbert Transform and Support Vector Machine Classification Method.
Proceedings of the IEEE Industry Applications Society Annual Meeting, 2021
Stochastic Programming Based Objective Function Optimization for Predictive Thrust Control of Linear Induction Machine.
Proceedings of the IEEE Industry Applications Society Annual Meeting, 2021
Fast Linear Speed Response Based on SMC with Finite-Control-Set Model Predictive Flux Control for Linear Induction Motor.
Proceedings of the IEEE Industry Applications Society Annual Meeting, 2021
2020
Simplified Model Predictive Thrust Control Based Arbitrary Two Voltage Vectors for Linear Induction Machines in Metro Transportation.
IEEE Trans. Veh. Technol., 2020
IEEE Trans. Veh. Technol., 2020
Effects of Design Parameters on the Multiphysics Performance of High-Speed Permanent Magnet Machines.
IEEE Trans. Ind. Electron., 2020
IEEE Trans. Ind. Electron., 2020
Bearing Corrosion Failure Diagnosis of Doubly Fed Induction Generator in Wind Turbines Based on Stator Current Analysis.
IEEE Trans. Ind. Electron., 2020
Fault-Tolerant Analysis and Design of AFPMSM With Multi-Disc Type Coreless Open-End Winding.
IEEE Access, 2020
IEEE Access, 2020
IEEE Access, 2020
Proceedings of the 46th Annual Conference of the IEEE Industrial Electronics Society, 2020
2019
Improved Continuous Fast Terminal Sliding Mode Control With Extended State Observer for Speed Regulation of PMSM Drive System.
IEEE Trans. Veh. Technol., 2019
Finite-Set Model Predictive Control Based Thrust Maximization of Linear Induction Motors Used in Linear Metros.
IEEE Trans. Veh. Technol., 2019
Investigation of a High-Frequency Pulsed Alternator Integrating Motor and Alternator.
IEEE Trans. Ind. Electron., 2019
Improved Coordinated Control of Standalone Brushless Doubly Fed Induction Generator Supplying Nonlinear Loads.
IEEE Trans. Ind. Electron., 2019
Sensorless Control of Standalone Brushless Doubly Fed Induction Generator Feeding Unbalanced Loads in a Ship Shaft Power Generation System.
IEEE Trans. Ind. Electron., 2019
An Improved Third-Order Generalized Integral Flux Observer for Sensorless Drive of PMSMs.
IEEE Trans. Ind. Electron., 2019
IEEE Trans. Ind. Electron., 2019
2018
Improved Deadbeat Predictive Current Control Combined Sliding Mode Strategy for PMSM Drive System.
IEEE Trans. Veh. Technol., 2018
An Improved Speed Sensorless Control Strategy for Linear Induction Machines Based on Extended State Observer for Linear Metro Drives.
IEEE Trans. Veh. Technol., 2018
Hierarchically Adaptive Frequency Control for an EV-Integrated Smart Grid With Renewable Energy.
IEEE Trans. Ind. Informatics, 2018
Low-Complexity Finite Control Set Model Predictive Control With Current Limit for Linear Induction Machines.
IEEE Trans. Ind. Electron., 2018
Accelerating the Optimal Shape Design of Linear Machines by Transient Simulation Using Mesh Deformation and Mesh Connection Techniques.
IEEE Trans. Ind. Electron., 2018
Comparative Study of Transversal-Flux Permanent-Magnetic Linear Oscillatory Machines for Compressor.
IEEE Trans. Ind. Electron., 2018
Flexible Power Distribution Control in an Asymmetrical-Cascaded-Multilevel-Converter-Based Hybrid Energy Storage System.
IEEE Trans. Ind. Electron., 2018
IEEE Trans. Ind. Electron., 2018
IEEE Trans. Ind. Electron., 2018
IEEE Trans. Ind. Electron., 2018
IEEE Trans. Ind. Electron., 2018
IEEE Trans. Ind. Electron., 2018
2017
Multistep Model Predictive Control With Current and Voltage Constraints for Linear Induction Machine Based Urban Transportation.
IEEE Trans. Veh. Technol., 2017
Fabrication and Experimental Analysis of an Axially Laminated Flux-Switching Permanent-Magnet Machine.
IEEE Trans. Ind. Electron., 2017
Optimal current reference with maximum thrust criterion for linear induction machine based deadbeat control.
Proceedings of the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, October 29, 2017
Proceedings of the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, October 29, 2017
Model predictive current control of brushless doubly-fed machine for stand-alone power generation system.
Proceedings of the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, October 29, 2017
New control strategy of stand-alone brushless doubly-fed induction generator for supplying unbalanced loads in ship shaft power generation system.
Proceedings of the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, October 29, 2017
Proceedings of the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, October 29, 2017
Proceedings of the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, October 29, 2017
2016
Fast sliding mode control on air-breathing hypersonic vehicles with transient response analysis.
J. Syst. Control. Eng., 2016
J. Frankl. Inst., 2016
A new optimization methodology of the linear generator for wave energy conversion systems.
Proceedings of the IEEE International Conference on Industrial Technology, 2016
Improved direct torque control based modified torque controller for surface-mounted permanent magnet synchronous machines.
Proceedings of the IEEE International Conference on Industrial Technology, 2016
2015
A permanent magnet traction machine with wide high efficiency range for EV application.
Proceedings of the IECON 2015, 2015
Nonsingular terminal sliding mode control for the speed regulation of permanent magnet synchronous motor with parameter uncertainties.
Proceedings of the IECON 2015, 2015
2014
A continuous sliding mode controller for the PMSM speed regulation based on disturbance observer.
Proceedings of the IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society, Dallas, TX, USA, October 29, 2014
2012
Equivalent Circuit Derivation and Performance Analysis of a Single-Sided Linear Induction Motor Based on the Winding Function Theory.
IEEE Trans. Veh. Technol., 2012
Rotor field oriented control of linear induction machine based on fuzzy self-adapting PI controller.
Proceedings of the 21st IEEE International Symposium on Industrial Electronics, 2012
A novel method to optimize the active crowbar resistance for low voltage ride through operation of doubly-fed induction generator based on wind energy.
Proceedings of the 21st IEEE International Symposium on Industrial Electronics, 2012
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012
One new model based predictive torque control algorithm for doubly salient permanent magnet synchronous machines.
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012
A linear-prediction maximum power point tracking algorithm for photovoltaic power generation.
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012
Theoretical research on short circuit fault of rotor inner winding in large turbo generator.
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012
2011
A Simple Method to Reduce Torque Ripple in Direct Torque-Controlled Permanent-Magnet Synchronous Motor by Using Vectors With Variable Amplitude and Angle.
IEEE Trans. Ind. Electron., 2011
IEEE Trans. Ind. Electron., 2011
2010
IEEE Trans. Veh. Technol., 2010